A novel approach of testability modeling and analysis for PHM systems based on failure evolution mechanism

Prognostics and health management (PHM) significantly improves system availability and reliability, and reduces the cost of system operations. Design for testability (DFT) developed concurrently with system design is an important way to improve PHM capability. Testability modeling and analysis are the foundation of DFT. This paper proposes a novel approach of testability modeling and analysis based on failure evolution mechanisms. At the component level, the fault progression-related information of each unit under test (UUT) in a system is obtained by means of failure modes, evolution mechanisms, effects and criticality analysis (FMEMECA), and then the failure-symptom dependency can be generated. At the system level, the dynamic attributes of UUTs are assigned by using the bond graph methodology, and then the symptom-test dependency can be obtained by means of the functional flow method. Based on the failure-symptom and symptom-test dependencies, testability analysis for PHM systems can be realized. A shunt motor is used to verify the application of the approach proposed in this paper. Experimental results show that this approach is able to be applied to testability modeling and analysis for PHM systems very well, and the analysis results can provide a guide for engineers to design for testability in order to improve PHM performance.     

航路网络交叉点布局规划的差分进化算法

航路交叉点布局问题（CrossingWaypointLocationProblem,CWLP）是航路网络设计的决定性问题,CWLP模型具有不可导、不可微等特性,因此不能用传统的算法对其进行处理。差分进化算法能够较好地解决航路汇聚点布局问题,在处理模型约束条件时,综合考虑各交叉点冲突约束违反程度和所有交叉点冲突数之和,将前者作为个体优劣的判断标准之一,后者转化成个体适应度,即个体的另一目标函数,求解过程中选用了动态的标准差分进化机制以确保算法的收敛性。将算法应用到北京飞行情报区航路网规划模型中,验证了算法的有效性。     

增强氟塑料干法制备工艺研究

对生产增强氟塑料的原材料P202和FR104两种聚四氟乙烯树脂性能进行了对比,采用“干法”制备工艺并对工艺参数进行改进,生产出FS-20d和FS-35d增强氟塑料。生产制品测试结果表明：“干法”制备工艺配方稳定、生产工艺稳定,制品的耐磨性能、耐高温性能、致密性、均匀性和相分散性均优于“湿法”制备工艺制品。     

基于自适应谱峰搜索的脉冲重复间隔最大似然估计

高精度的脉冲重复间隔（PRI）估计对于提高现代电子情报（ELINT）系统的辐射源识别能力具有重要意义。将观测的脉冲到达时间（TOA）序列建模成点过程信号,其周期图谱谱峰就对应于PRI的最大似然估计（MLE）。本文提出了一个“两步数值搜索”策略,可以确保搜索到谱峰而达到MLE。仿真表明,在低信噪比以及高脉冲丢失率条件下,本文算法性能远超已有算法。     

中国微藻航空煤油制备潜能及CO2减排

综合考虑中国各地温度变化、水资源和CO₂的供给能力等因素,分析了中国适合微拟球藻规模化养殖的地区;根据2013年沿海地区燃煤发电排放CO₂量,结合蓬莱地区微拟球藻规模化养殖的实际数据,预测了中国微藻的年产量潜力及在现有技术水平下利用这些微藻原料可制备航空煤油的潜力;并采用全生命周期模型GREET计算了微藻航空煤油相比传统石油基航空煤油在全生命周期内中可减少CO₂的排放量。结果表明:目前中国具有每年8894万t的微藻养殖潜力,这些微藻共可制备航空煤油1917万t;与传统航煤相比,制备1 t微藻航空煤油在全生命周期内相比传统航空煤油可降低CO₂排放2.28 t。     

前置隔板对圆柱绕流影响的实验分析

对经典的圆柱绕流模型,运用前置隔板对流场进行控制。利用粒子图像测速(PIV)方法在自循环水槽中研究了雷诺数为1 800时,柔性和刚性2种不同刚度的前置隔板对圆柱绕流的影响。研究发现:柔性隔板自由端的弯曲增加了对流场的额外扰动,并且柔性隔板弯曲变形会诱导产生脱落涡,导致尾迹流场的主频发生变化。在圆柱下游流场,无隔板工况与柔性隔板工况的回流区长度相当,刚性隔板工况的回流区相较之下则更长。结果显示:前置隔板还能在一定程度上减小圆柱绕流的阻力。      

Dynamical evolution of high area-to-mass ratio objects in Molniya orbits

For special demands, some notable orbit types have been developed by human, including the Molniya orbits, which have a relatively high eccentricity up to about 0.7, and a period of 12 h. Considering that space debris with high area-to-mass ratio (A/M) has been discovered, such objects may also exist in Molniya orbits due to spacecraft and upper stages fragmentation events. However, there are not sufficient studies of the complex dynamical phenomena of such orbits. These studies can enrich the knowledge about the long-term evolution of these orbits, be helpful to propose uncatalogued objects observation and identification, and also set the protected region as well as active debris removal. In this paper, the characteristics of 2:1 resonance of Molniya satellite orbits are studied. A large set of numerical simulations, including all the relevant perturbations, is carried out to further investigate the main characteristics, and special attention is payed to the dynamical evolution of objects with high A/M, particularly affected by the direct solar radiation pressure. The long-term dynamical evolution of orbital elements, as well as the dependency of lifetime on the A/M value, is discussed.     

论互联网对新生代青年农民生活模式演变的影响

从涉及新生代青年农民生活模式的消费生活、政治生活、休闲生活、社交生活等方面着手。阐述互联网在他们中的应用情况,解构了互联网对新生代农民生活方式产生的客观影响,并选取浙江义乌农村青年为调研样本,从上述方面进行数据分析,得出影响较大的和不够的方面,为农村信息化的实施提供了一定的样本参照。     

基于声发射信号的高速铣削过程监测技术

叙述了如何将声发射技术应用于航空铝合金的高速铣削过程监测,介绍了监测装置硬件系统和信号数据采集平台的构成,最后运用小波分析进行信号分解,计算分解后的各频段能量,并从频段的能量对比中发现,信号能量可以作为刀具磨损的特征参数.     

服务化多工艺设计研究

提出了服务化的多工艺设计方法。建立了基于过程规范语言的完整多工艺信息模型,提供统一的工艺数据访问服务和工艺业务服务调用。最后,给出了服务化多工艺设计平台体系结构,采用开源的面向服务架构技术进行了系统实现。