基于CPLD的循环冗余校验码的实现

本文介绍了利用VHDL语言，在MAXPLUSⅡ平台上，使用CPLD实现串行、并行两种信源方式的CRC码的设计及其模型验证结果。无论是串行，还是并行的信源要想实现CRC码设计必须建立校验、纠错两个模块，完成数据传输中的差错控制。同时在用硬件实现CRC码传输的过程中，比较了串、并两种方式的优缺点。     

Virtual Reality-based Teleoperation with Robustness Against Modeling Errors

This article investigates virtual reality (VR)-based teleoperation with robustness against modeling errors. VR technology is an effective way to overcome the large time delay during space robot teleoperation. However, it depends highly on the accuracy of model. Model errors between the virtual and real environment exist inevitably. The existing way to deal with the problem is by means of either model matching or robot compliance control. As distinct from the existing methods, this article tries to combine model matching and robot compliance control. On one hand, the status of the virtual robot is corrected by using the position sensor data from robot joints before and during teleoperation, and the pose of the virtually manipulated object is obtained with visual recognition technology. On the other hand, compliance control algorithms of impedance control based on joint torque sensors and hybrid position/force control based on a wrist sensor have been executed in order to eliminate the small sustaining model errors. A VR-based teleoperation system of satellite on-orbit self-serving is built up. In order to verify the proposed method, an experiment deploying the solar panel troubled by malfunction is carried out through teleoperation. It shows that the large model errors are removed with the model matching method and the adopted compliance control is robust against the remaining small model errors.     

基于交叉验证的捷联惯导制导工具误差分离方法

在捷联惯导制导工具误差分离过程中引入交叉验证检验制导工具误差分离精度,并基于均方误差准则建立量化检验指标.首先建立简化的制导工具误差分离模型,并将数据划分成训练集和检验集;然后利用训练集进行制导工具误差分离;最后利用检验集和量化检验指标对分离效果进行检验.数学仿真表明,提出的误差分离模型正确可靠,精度较高,交叉验证能够对分离效果进行有效检验.     

梯型螺母中径综合误差值分析

在机械传动中,梯形丝杠与大小螺母的配合是一种常见的结构,而梯形丝杠中的大、小螺母的加工又是一个关键问题,结合工程实际提出了梯型螺母在加工检验中存在的中径精度问题,并就此问题进行了详细讨论和理论分析,并且给出了解决问题的方法,对于同类零件的加工也具有指导意义.     

超声波流量计不同运算方式对比分析

温度漂移是影响超声波流量计测量精度的一个重要因素,本文从算法上提出一种不受其影响的数学模型,以使相应的硬件简单化.该方法已应用在超声波流量计中,收到了很好的效果.     

频率计数器在航天器信号频率测量中的适用性分析

从频率计数器的工作原理出发,分析了航天器测控通信中常用的调相信号、调频信号和相移键控信号的频率测量误差,给出了调相信号和调频信号的测量误差表达式。使用频率计数器对上述3种航天器信号进行了频率测量试验。理论分析和试验结果表明,频率计数器适用于航天器调相信号和调频信号的频率测量,不适用于相移键控信号的频率测量。在实际使用中,为保证测量精度,应根据被测信号的调制方式选择适当的测量方法。     

Minimum sliding mode error feedback control for fault tolerant small satellite attitude control

This paper proposes a new control strategy (which we call “minimum sliding mode error feedback control, MSMEFC”) for small satellite attitude control. As we know, the attitude control algorithm plays a significant role in the whole performance of the satellite, especially under the existence of uncertain disturbances from the space. Without loss of generality, the MSMEFC is presented based on the sliding mode theory. It is assumed that the equivalent control error is defined to offset the uncertain disturbances to improve the control performance. Hence, in order to estimate the optimal equivalent control error, a cost function is derived on the basis of the principle of minimum sliding mode error. Then, the equivalent control error wills feedback to the conventional sliding mode control to obtain the final MSMEFC. According to the theoretical analyzes, the sliding mode after the MSMEFC will approximate to the ideal sliding mode, resulting in enhancing the control performance. Moreover, an adaptive non-singular terminal sliding mode is employed to compare with the performance of MSMEFC. Several simulations are performed to verify the effectiveness of proposed MSMEFC in the presence of serious perturbations, even in some fault-tolerant scenarios.     

Cooperative guidance of seeker-less missile considering localization error

To perform an accurate fire-and-forget attack of seeker-less missile with the consideration of the localization error, a new cooperative guidance strategy of multi-missiles is proposed in this work. Firstly, an estimated position of the seeker-less missile is carefully selected, based on which the slant angle of the line between the estimated and real positions of the seeker-less missile is approximately derived inspired by the localization theory of GPS(Global Position System).Then, respectively based on the guidance law considering the impact angle and time constraints, the consensus theory and the finite-time convergence approach, three cooperative guidance laws employing the previously obtained slant angle are derived for intensive attack to address either a stationary or maneuvering target. Simulation results well demonstrate the effectiveness and advantages of the proposed cooperative guidance strategy.     

基于共轭次梯度算法的磁传感器安装误差校正

随着头盔显示技术的发展,对头盔电磁定位的精度要求越来越高,在现有的加工工艺和机上安装条件下,要提高定位精度,必须对传感器安装误差进行校正。通过坐标转换原理对安装误差进行建模,在此基础上利用最小二乘原则选取目标函数,将校正过程抽象为最优化问题求解。提出一种基于共轭次梯度算法的最优化问题求解方法,实现了传感器安装误差校正。利用MATLAB上对校正算法进行仿真,仿真结果表明,共轭次梯度算法简洁易用、校正精度高、收敛速度快,能够明显提高磁场测量精度。     

基于功率裕度的某型发动机全寿命性能研究

随着使用时间不断增加,研究飞行队所有选装ARRIEL2S系列发动机全寿命性能变化趋势的必要性突显.针对SRRIEL2S系列发动机全寿命性能参数变化特点,提出使用基于可几误差舍弃理论处理发动机功率校验数据,分区间描绘该系发动机全寿命性能指标变化趋势,给出该系发动机全寿命性能特点,为机务工程人员监控该系发动机提供有利依据；提出延长功率校验间隔的假设,并在理论上做了充分论证,为节约该系发动机运行成本提供一个明确及可行的方向.