Study of seasonal and long-term vertical deformation in Nepal based on GPS and GRACE observations

Lithospheric deformation signal can be detected by combining data from continuous global positioning system (CGPS) and satellite observations from the Gravity Recovery and Climate Experiment (GRACE). In this paper, we use 2.5- to 19-year-long time series from 35 CGPS stations to estimate vertical deformation rates in Nepal, which is located in the southern side of the Himalaya. GPS results were compared with GRACE observations. Principal component analysis was conducted to decompose the time series into three-dimensional principal components (PCs) and spatial eigenvectors. The top three high-order PCs were calculated to correct common mode errors. Both GPS and GRACE observations showed significant seasonal variations. The observed seasonal GPS vertical variations are in good agreement with those from the GRACE-derived results, particularly for changes in surface pressure, non-tidal oceanic mass loading, and hydrologic loading. The GPS-observed rates of vertical deformation obtained for the region suggest both tectonic impact and mass decrease. The rates of vertical crustal deformation were estimated by removing the GRACE-derived hydrological vertical rates from the GPS measurements. Most of the sites located in the southern part of the Main Himalayan Thrust subsided, whereas the northern part mostly showed an uplift. These results may contribute to the understanding of secular vertical crustal deformation in Nepal.     

Optimal guidance of extended trajectory shaping

To control missile＇s miss distance as well as terminal impact angle, by involving the timeto-go-nth power in the cost function, an extended optimal guidance law against a constant maneuvering target or a stationary target is proposed using the linear quadratic optimal control theory.An extended trajectory shaping guidance（ETSG） law is then proposed under the assumption that the missile-target relative velocity is constant and the line of sight angle is small. For a lag-free ETSG system, closed-form solutions for the missile＇s acceleration command are derived by the method of Schwartz inequality and linear simulations are performed to verify the closed-form results. Normalized adjoint systems for miss distance and terminal impact angle error are presented independently for stationary targets and constant maneuvering targets, respectively. Detailed discussions about the terminal misses and impact angle errors induced by terminal impact angle constraint, initial heading error, seeker zero position errors and target maneuvering, are performed.     

叶片型面测量的数据分析及误差评定方法

通过对三坐标测量机测量精铸叶片的种类、原理和方法进行分析,重点探讨了三坐标测量机测量扭曲叶片产生误差的原因及误差修正方法,并应用实例进行了较为详尽的论述和验证,给出了扭曲叶片检测误差修正的实现算法和评价方法。     

薄板焊缝中超声TOFD检测方法浅析

回顾了超声TOFD检测方法,分析了超声TOFD近表面盲区的形成原因和3种改善近表面检测盲区的方法,包括TOFDW、S-TOFD以及基于希尔伯特黄变换的缺陷信号处理方法,并进行了典型的检测试验分析。利用TOFDW方法,TOFD表面检测盲区可达2mm。     

硅微静电悬浮陀螺微位移检测电路噪声分析

硅微静电悬浮惯性仪表主要面向空间应用,如卫星无拖曳控制,星载重力测量等,具有潜在分辨率高、功耗低、体积小、多轴集成等特点。仪表的高分辨率实现对检测电路的噪声提出了较高要求。本文以硅微静电悬浮陀螺仪单频调幅电容式微位移检测电路为例,从电路外部干扰噪声耦合机理及抑制、电路内部噪声分析及优化两个方面,给出了电源耦合噪声、电路温度特性以及放大器电路噪声分析优化等方面的理论推导、仿真及实验验证。     

无线传感网中能量优化的异常检测算法

基于网内数据处理技术和网络动态分簇技术,提出一种能量优化的异常检测算法。算法首先利用节点协作计算获取相关性信息,然后根据节点相关性和节点能量信息进行动态网络分簇,最后利用簇内相关与簇间相关性进行能量有效性的异常检测。相关测试结果表明,本文算法既保证了传感网异常检测精度又提高了网络能量利用效率。     

发射惯性坐标系下误差角与数学平台失准角的推导与仿真

基于状态空间法的捷联惯性/天文组合导航系统(SINS/CNS)需要数学平台失准角作为观测值参与滤波估计,工程实际只能得到SINS、CNS二者的姿态误差角.以弹道导弹为背景,在发射惯性坐标系下分别推导了四元数和欧拉角形式的姿态误差角与数学平台失准角之间的相互转换矩阵.建立了弹道导弹SINS/CNS数学模型,并采用EKF和UKF算法验证了该转换矩阵.仿真结果表明误差转换矩阵的正确性.     

基于改进扩展分形特征的SAR图像目标检测方法

提出了一种新的纹理特征-改进扩展分形特征用于SAR图像目标检测.改进扩展分形特征通过度量SAR图像中物体表面四个方向的结构函数在双尺度上的增量水平,确定目标与杂波在特征空间的不同响应特性,实现目标的检测.采用模拟目标脉冲模型分析了改进扩展分形特征在不同信噪比条件下对不同尺寸目标的响应特性,分析结果表明改进扩展分形特征具有目标尺寸敏感性.利用SAR实测数据验证了改进扩展分形特征在强杂波和多目标环境下的优良检测性能与空间分辨率特性.     

基于解析法的用户差分距离误差解算方法(英文)

为了进一步增强星基导航系统的完好性性能,提出了一种基于解析法的用户差分距离误差计算方法。文中首先介绍了卫星时钟和星历改正数的计算方法,认为计算用户差分距离误差的关键是查找卫星服务区域内的最差用户位置。通过变换卫星时钟和星历误差协方差矩阵,将查找最差用户位置变换成一个解析几何问题,通过数学推导得出最差用户位置的解析式,进而求解用户差分距离误差。通过计算机仿真对比了解析法和遍历法之间的性能差异,结果表明:解析法的正确性由遍历法得到了验证,解析法可以减少90%的运行时间并且具有更低的计算复杂度,便于工程实现。