人造硬壳层扩散作用的研究

主要研究人造硬壳层的扩散作用，运用有限元模拟的方法，在规范规定的基础上确定出了应力扩散角，且得出加肋梁后应力扩散角基本不变的结论。讨论了加肋梁后固化双层地基的硬壳层等效厚度，为工程应用提供参考。     

Utilization of CAM,CAF, MAX,and FAX for space radiation analyses using HZETRN

To estimate astronaut health risk due to space radiation, one must have the ability to calculate various exposure-related quantities that are averaged over specific organs and tissue types. Such calculations require computational models of the ambient space radiation environment, particle transport, nuclear and atomic physics, and the human body. While significant efforts have been made to verify, validate, and quantify the uncertainties associated with many of these models and tools, relatively little work has focused on the uncertainties associated with the representation and utilization of the human phantoms. In this study, we first examine the anatomical properties of the Computerized Anatomical Man (CAM), Computerized Anatomical Female (CAF), Male Adult voXel (MAX), and Female Adult voXel (FAX) models by comparing the masses of various model tissues used to calculate effective dose to the reference values specified by the International Commission on Radiological Protection (ICRP). The MAX and FAX tissue masses are found to be in good agreement with the reference data, while major discrepancies are found between the CAM and CAF tissue masses and the reference data for almost all of the effective dose tissues. We next examine the distribution of target points used with the deterministic transport code HZETRN (High charge (Z) and Energy TRaNsport) to compute mass averaged exposure quantities. A numerical algorithm is presented and used to generate multiple point distributions of varying fidelity for many of the effective dose tissues identified in CAM, CAF, MAX, and FAX. The point distributions are used to compute mass averaged dose equivalent values under both a galactic cosmic ray (GCR) and solar particle event (SPE) environment impinging isotropically on three spherical aluminum shells with areal densities of 0.4 g/cm², 2.0 g/cm², and 10.0 g/cm². The dose equivalent values are examined to identify a recommended set of target points for each of the tissues and to further assess the differences between CAM, CAF, MAX, and FAX. It is concluded that the previously published CAM and CAF point distributions were significantly under-sampled and that the set of point distributions presented here should be adequate for future studies involving CAM, CAF, MAX, or FAX. It is also found that the errors associated with the mass and location of certain tissues in CAM and CAF have a significant impact on the mass averaged dose equivalent values, and it is concluded that MAX and FAX are more accurate than CAM and CAF for space radiation analyses.     

On the validity of the aluminum equivalent approximation in space radiation shielding applications

The origin of the aluminum equivalent shield approximation in space radiation analysis can be traced back to its roots in the early years of the NASA space programs (Mercury, Gemini and Apollo) wherein the primary radiobiological concern was the intense sources of ionizing radiation causing short term effects which was thought to jeopardize the safety of the crew and hence the mission. Herein, it is shown that the aluminum equivalent shield approximation, although reasonably well suited for that time period and to the application for which it was developed, is of questionable usefulness to the radiobiological concerns of routine space operations of the 21st century which will include long stays onboard the International Space Station (ISS) and perhaps the moon. This is especially true for a risk based protection system, as appears imminent for deep space exploration where the long-term effects of Galactic Cosmic Ray (GCR) exposure is of primary concern. The present analysis demonstrates that sufficiently large errors in the interior particle environment of a spacecraft result from the use of the aluminum equivalent approximation, and such approximations should be avoided in future astronaut risk estimates. In this study, the aluminum equivalent approximation is evaluated as a means for estimating the particle environment within a spacecraft structure induced by the GCR radiation field. For comparison, the two extremes of the GCR environment, the 1977 solar minimum and the 2001 solar maximum, are considered. These environments are coupled to the Langley Research Center (LaRC) deterministic ionized particle transport code High charge (Z) and Energy TRaNsport (HZETRN), which propagates the GCR spectra for elements with charges (Z) in the range 1 ? Z ? 28 (H–Ni) and secondary neutrons through selected target materials. The coupling of the GCR extremes to HZETRN allows for the examination of the induced environment within the interior of an idealized spacecraft as approximated by a spherical shell shield, and the effects of the aluminum equivalent approximation for a good polymeric shield material such as generic polyethylene (PE). The shield thickness is represented by a 25 g/cm² spherical shell. Although, one could imagine the progression to greater thickness, the current range will be sufficient to evaluate the qualitative usefulness of the aluminum equivalent approximation. Upon establishing the inaccuracies of the aluminum equivalent approximation through numerical simulations of the GCR radiation field attenuation for PE and aluminum equivalent PE spherical shells, we further present results for a limited set of commercially available, hydrogen rich, multifunctional polymeric constituents to assess the effect of the aluminum equivalent approximation on their radiation attenuation response as compared to the generic PE.     

基于Δ-Υ等效变换的SGCMG高速转子轴向振动特性分析及验证

悬臂式单框架控制力矩陀螺（SGCMG）的轴向振动较为剧烈,频率成分也比较复杂;由于这种SGCMG结构是由众多串、并联,甚至桥联的弹性构件组成的,因此难以建立其精确的轴向动力学模型.首先通过Δ-Υ等效变换的方法,简化了高速转子的轴向串并联关系,进而计算出其轴向刚度;其次详细分析了系统激振源——预紧轴承各零部件的加工波纹所导致的预紧力的波动,并采用相互调幅的形式描述了该波动量;然后建立了高速转子的轴向动力学方程;最后通过数值仿真和实测结果的对比验证了分析的合理性和模型的有效性.     

Quantum dosimetry and online visualization of X-ray and charged particle radiation in commercial aircraft at operational flight altitudes with the pixel detector Timepix

We investigate the application of the hybrid semiconductor pixel detector Timepix for precise characterization, quantum sensitivity dosimetry and visualization of the charged particle radiation and X-ray field inside commercial aircraft at operational flight altitudes. The quantum counting capability and granularity of Timepix provides the composition and spectral-characteristics of the X-ray and charged-particle field with high sensitivity, wide dynamic range, high spatial resolution and particle type resolving power. For energetic charged particles the direction of trajectory and linear energy transfer can be measured. The detector is operated by the integrated readout interface FITPix for power, control and data acquisition together with the software package Pixelman for online visualization and real-time data processing. The compact and portable radiation camera can be deployed remotely being controlled simply by a laptop computer. The device performs continuous monitoring and accurate time-dependent measurements in wide dynamic range of particle fluxes, deposited energy, absorbed dose and equivalent dose rates. Results are presented for in-flight measurements at altitudes up to 12 km in various flights selected in the period 2006–2013.     

Joint Iterative Decoding for Network-Coding-Based Multisource LDPC-Coded Cooperative MIMO

A network-coding-based multisource LDPC-coded cooperative MIMO scheme is proposed,where multiple sources transmit their messages to the destination with the assistance from a single relay.The relay cooperates with multiple sources simultaneously via network-coding.It avoids the issues of imperfect frequency/timing synchronization and large transmission delay which may be introduced by frequency-division multiple access(FDMA)/code-division multiple access(CDMA)and time-division multiple access(TDMA)manners.The proposed joint″Min-Sum″iterative decoding is effectively carried out in the destination.Such a decoding algorithm agrees with the introduced equivalent joint Tanner graph which can be used to fully characterize LDPC codes employed by the sources and relay.Theoretical analysis and numerical simulation show that the proposed scheme with joint iterative decoding can achieve significant cooperation diversity gain.Furthermore,for the relay,compared with the cascade scheme,the proposed scheme has much lower complexity of LDPC-encoding and is easier to be implemented in the hardware with similar bit error rate(BER)performance.     

含非线性特性的卫星压紧释放机构动力学研究

针对卫星新型压紧释放机构的局部非线性特性，建立局部非线性结构模型，通过模拟加载得到局部非线性结构的力-位移曲线，根据实际结构的工作情况定义结构等效刚度载荷和位移限制的选取原则，并求解结构等效刚度取值区间，最后针对天线动力学特性开展区间不确定性分析。分析结果与试验结果能够很好地吻合，天线基频误差在10%以内，满足工程应用需求，说明该分析方法的有效性。提出的局部非线性结构等效刚度区间分析方法可为卫星天线新型压紧释放机构非线性动力学分析提供解决途径，也可为其他局部非线性结构动力学分析提供参考。     

空间可展桁架结构等效动力学模型研究进展与展望

随着航天重大工程的逐步实施，桁架式空间可展结构正朝着大型化、轻量化和多功能等方向发展，该类桁架结构具有周期性、大柔度、构型复杂等特点。为满足大型空间结构的高精度、高可靠性要求，其动力学建模、非线性振动与振动控制等问题越来越复杂且难于处理。因此，大型空间可展结构的等效连续体建模成为研究热点。本文着重介绍大型空间可展桁架结构等效动力学建模的研究现状，综述了等效动力学建模的研究对象、方法及已取得的成果，提炼出等效动力学建模和与之相应的非线性振动与振动控制研究领域中亟待深入研究的关键科学问题。     

快速加热下铜再结晶织构的形成模型与模拟

基于形核的Gibbs-Thomson关系理论和由晶粒尺寸效应引起的优势生长机制。综合各种理论，建立了铜再结晶织构解析式数学分析模型。计算机模拟结果表明，在较慢的加快速度下，完全再结晶时织构为单一的立方组分；在快速加热条件下，完全再结晶时织构可由立方织构组分和保留的冷轧织构组分所组成；再结晶织构受加热速度的影响。     

系统可靠性中工作时间的不确定性(英文)

 在现有可靠性理论中系统工作时间被认为可以确定性地表示。但实际上由于系统工作时间可能带有随机和模糊这两种不确定性,上述观点不再是合理了。本文研究在系统工作时间带有不确定性时的系统可靠性行为,并定义了模糊可靠度和等效工作时间这两个概念。