海洋环境对吊放声纳作战使用影响研究

作战海域海洋环境对航空吊放声纳工作深度、探潜能力有重要影响。文中以声纳方程为基础,分析了作战海域海况、深度等海洋环境因素对吊放声纳作战使用及探测能力的影响,为合理使用吊放声纳提供了依据。     

战斗机综合热能管理系统稳态仿真

建立综合热管理系统稳态仿真数学模型,在SIMULINK软件平台上搭建仿真模块,对系统同一高度不同马赫数及同一马赫数不同高度进行了稳态仿真,得到系统中关键部件的进出口温度和流量,并分析了马赫数以及高度变化对各状态点温度的影响。分析得出马赫数增加各状态点的温度基本是增加的,只有燃油冷却出口温度先减后增;各状态点的温度随高度的增高基本是减小的,只有燃油冷却出口温度是增加的。     

Charging of dust grains by anisotropic solar wind multi-component plasma

In this paper we study the charging process of small grain particles by anisotropic multi-component solar wind plasmas (electrons, protons and heavy ions), versus two-component (electron/proton) plasmas. We are focusing attention on the important characteristics of the charging process, namely the charging time, floating potential and current content as functions of plasma parameters such as He⁺⁺/H⁺ (α/p) number density and T_α/T_p temperature ratios of alpha particles to protons, as well as plasma streaming velocity v₀. Measured statistical properties of solar wind plasma parameters at 1 AU show considerable variations in α/p-temperature ratios from 1 to 10, in α/p-number density ratio from 0.01 to 0.35, as well as in values of streaming velocity v₀ from 200 km/s to 1000 km/s and more. Periods of these variations could last for several days each, leading to significant variability in the charging process, according to newly derived general analytical expressions. Numerical calculations performed for protons/alphas plasmas showed large disparity in the charging characteristics. For example, in anisotropic plasma, grain charging time varies up to 90% depending on α/p-particles temperature and number density ratios, whereas changes in floating potential are up to 40%. In contrast, in isotropic plasma, charging characteristic for grains do not change very much for the same plasma parameters variations, with charging time varying about 12% and floating potential only varying about 4%. It is also shown that in highly anisotropic plasma, with all ballistic electrons and ions, dust grains could not hold their charges, and characteristic discharged time is calculated. We note that the analysis is equally applicable to any sized body immersed in solar wind plasma.     

Kinetic theory of sheath formation in solar wind plasma

We present a general self-consistent kinetic theory for plasma sheath formation in solar wind plasma. The theory could be applied to anisotropic, as well as to isotropic collisionless plasma without resorting to any simplifications, limitations, or assumptions, such as the necessary existence of a ‘pre-sheath’ region of ions acceleration to ensure the Bohm criterion. The kinetic framework is first applied to sheath formation around an arbitrary oriented planar absorbing surface, charged by solar wind anisotropic plasma, under the condition of negligible photoelectric effect. We then make use of our kinetic approach for the plane geometry in isotropic collisionless plasma, as a particular case of a planar electrode orientation parallel to plasma streaming velocity, also analyzing the sheath structure around spherical and cylindrical absorbing electrodes submerged in isotropic collisionless plasma. Obtained results demonstrate principal differences in spatial charge distributions in sheath regions between spherical or cylindrical electrodes of large size and an unbound planar surface submerged in isotropic plasma. In the case of a planar electrode, we directly compare results obtained in our kinetic and hydrodynamic theories and conventional hydrodynamic theory of plasma sheath formation. The outcome from the present study have direct implications to the analysis of plasma sheath structure and associated distribution in space of charged dust grains, which is relevant to the moon exploration near the optical terminator region or in shadowed craters in the moon.     

某探测器上火箭发动机热防护仿真与设计

根据某探测器的具体结构及工作条件,分析和计算探测器上火箭发动机的热环境参数.利用有限元法计算火箭发动机固壁辐射热流密度,依据热流边界条件设计热防护方案;利用有效发射率表征多层隔热材料隔热性能并进行温度场数值仿真.由于多层隔热材料性能参数的不易确定性,计算了参数在较大范围内的热防护效果.通过仿真计算验证热防护方案的有效性和可靠性,并分析影响热防护效果的主要因素;计算结果表明多层隔热材料的有效发射率是影响隔热性能最重要的因素,比热容、表面发射率、密度对热防护性能影响很小.      

星敏感器空间辐射效应研究

星敏感器作为一类高灵敏度光电集成部件,易受空间辐射的影响造成性能退化和工作 异常。分析星敏感器的辐射效应机理并制定相应的防护对策,既是当前可靠性增长的基础, 也是今后高性能星敏感器发展的必然要求,而国内尚缺少对这一问题的详细论述。阐述了空 间辐射环境和星敏感器的组成以及工作原理,综述分析了空间辐射效应机理和对星敏感器产 生的影响,并介绍了国外在相应防护对策上的经验,更进一步对影响星敏感器较为严重的瞬 态效应做了较为深入的探讨。
     

飞行器鼻锥凹腔-发散组合冷却数值模拟

尖锐鼻锥冷却方案是可复用式航天飞行器研究领域一个十分重要的课题。传统发散冷却虽然可以有效降低鼻锥结构温度,但是由于驻点外极高的热流、压力,会出现驻点冷却效果差的问题。迎风凹腔结构是一种针对鼻锥驻点区域的减阻防热方案,尖锐唇口的分流作用可以使附近压力、热流降低。因此,提出一种新型冷却结构——凹腔-发散组合冷却,利用迎风凹腔结构对驻点的强化冷却解决发散冷却中驻点难以冷却的问题。以楔形鼻锥为物理模型,对发散冷却、迎风凹腔结构和凹腔-发散冷却3种冷却结构进行数值模拟,并和无冷却的纯鼻锥结构进行对比。结果表明,与传统发散冷却相比,使用凹腔-发散组合冷却可以使结构温度峰值下降16.8%;与没有冷却的纯鼻锥模型相比,鼻锥头部圆弧段表面平均温度降幅可达64%,证实了这种新型冷却结构的可行性和高效性。     

飞机电磁环境效应的特性及控制

从飞机设计中电磁环境效应基础专业的技术领域和专业构成的演变出发,本文系统地介绍了电磁环境效应的特性以及与飞机使用和安全的关系,重点论述了飞机研制中来自电磁环境效应的威胁及其控制措施。     

无人机路径规划中的环境和威胁模型研究

为了提高无人机执行任务时的突防能力,在进行飞行路径规划时必须对战场环境中的威胁环境进行评估,而威胁环境中的威胁估计与飞机被雷达或类似的传感器探测出的风险度有关,需要考虑的信息包括无人机传感器范围内的威胁位置和强度.路径规划算法依赖于路径规划空间的建模方式,包括环境建模和威胁源建模.目前针对规划空间环境和威胁模型的建模方法缺乏系统分类和论述.分析了战场环境的建模方法,研究了规划空间的离散建模方式,根据无人机飞行过程中可能遭遇的威胁类型进行威胁源类型的划分,并针对三种威胁类型分别建立威胁风险模型,为无人机在复杂环境下的路径规划实现做了参数准备.     

Europa planetary protection for Juno Jupiter Orbiter

NASA’s Juno mission launched in 2011 and will explore Jupiter and its near environment starting in 2016. Planetary protection requirements for avoiding the contamination of Europa have been taken into account in the Juno mission design. In particular Juno’s polar orbit, which enables scientific investigations of parts of Jupiter’s environment never before visited, also greatly assist avoiding close flybys of Europa and the other Galilean satellites.