水陆两栖飞机内吹式襟翼优化设计

为改善某型水陆两栖飞机的起降性能,提高其抗浪能力,需设计高性能吹气襟翼以满足其性能要求。本文在国内外已有的吹气襟翼研究基础上,结合飞机气动综合优化设计框架及计算流体力学(CFD)的优势,以设计出高气动效率及工程实用性的内吹式襟翼方案作为设计目标,对内吹式襟翼的基本形式、吹气缝道位置及喷缝参数等进行综合优化设计,最终通过风洞试验来验证优化设计方案的有效性。从分析及验证结果来看,通过本优化设计方法所设计的内吹式襟翼,能在使用相同吹气动量系数的条件下,明显推迟襟翼上的气流分离,实现最大升力系数20%左右的提升,显著提升了内吹式襟翼的气动效率,为进一步实现内吹式襟翼的工程应用奠定了基础。     

高空长航时飞行器机翼跨声速气动优化设计

高空长航时飞行器应具有升阻比高和俯仰力矩小的气动特性.基于遗传算法的随机性和隐含并行性,结合适用于多目标处理的Pareto方法,在低雷诺数和跨声速条件下,展开了高空长航时飞行器机翼外形的多目标、多设计点的数值优化设计.仿真计算结果表明,所设计的机翼具有较高的升阻比和较低的俯仰力矩,同时在设计马赫数附近升阻比的变化比较平稳,具有良好的综合气动性能.     

单OSV服务多卫星的转移轨道优化研究

利用混合法解决了有限推力作用下单OSV服务多卫星的转移轨道优化问题.首先从OSV携带燃料的角度出发,初步筛选出在其服务范围内的服务对象,基于双脉冲交会假设,确定了服务序列以及时间节点;其次针对每一段转移轨道,利用Pontryagin极小值原理推导出最优控制律,设定开-关-开的发动机工作方式,将初始协态变量和开关机时间进行参数化处理,采用遗传算法对非线性规划问题进行求解;最后对整条轨道进行拼接优化.仿真结果表明,混合法对协态变量初值猜测敏感性小,降低了搜索最优转移轨道的难度,且控制轨线光滑.     

基于MPI的大规模变量结构优化技术研究

针对大规模变量结构优化问题,研究了基于虚载荷法的位移敏度求解理论,提出了惩罚函数随优化迭代次数自适应变化的二次扩展内罚函数法,并结合牛顿法作为优化算法.采用MPI并行技术实现了敏度求解的局部并行计算,解决了大规模变量结构优化技术中的规模和效率问题.采用FORTRAN语言在HAJIF2013系统上对上述方法编程实现,实例表明,优化方法能够快速、稳定收敛到最优解,以及基于虚载荷法的位移敏度解析求解理论的高效性和准确性.     

基于模糊理论的跳跃轨迹多目标优化设计

针对探月返回跳跃轨迹的多目标优化设计问题,提出了一种基于模糊理论的优化设计方法,并对非线性隶属度函数对优化结果的影响进行了研究.首先,将连续的无限维优化问题进行离散化,转化为非线性规划问题;其次,用隶属度函数将各个子目标进行模糊化,将多目标优化问题转化为求模糊判决隶属度函数的最大值问题;最后,求解经过模糊化的非线性规划问题.分析了探月返回跳跃轨迹的特性,表明模糊多目标优化更能体现决策者的偏好.构造了具有不同凹凸性、不同形状的非线性隶属度函数,比较了它们对优化结果的影响,结果表明隶属度函数影响多目标模糊优化结果的首要因素是隶属度函数的凹凸性.     

Aircraft robust multidisciplinary design optimization methodology based on fuzzy preference function

This paper presents a Fuzzy Preference Function-based Robust Multidisciplinary Design Optimization (FPF-RMDO) methodology. This method is an effective approach to multidisciplinary systems, which can be used to designer experiences during the design optimization process by fuzzy preference functions. In this study, two optimizations are done for Predator MQ-1 Unmanned Aerial Vehicle (UAV): (A) deterministic optimization and (B) robust optimization. In both problems, minimization of takeoff weight and drag is considered as objective functions, which have been optimized using Non-dominated Sorting Genetic Algorithm (NSGA). In the robust design optimization, cruise altitude and velocity are considered as uncertainties that are modeled by the Monte Carlo Simulation (MCS) method. Aerodynamics, stability and control, mass properties, performance, and center of gravity are used for multidisciplinary analysis. Robust design optimization results show 46% and 42% robustness improvement for takeoff weight and cruise drag relative to optimal design respectively.     

基于结构模态的机翼带吊舱有限元建模方法

针对无有限元模型的颤振计算建模问题,提出了一种采用结构优化方法建立有限元模型的方法。依据标准算例的结构尺寸和材料特性建立其有限元模型,采用集中质量单元和连接杆模拟外挂吊舱结构,得到了机翼带吊舱的标准模型。计算其结构模态并作为优化目标,建立几何尺寸、质量与标准模型一致。但结构参数不一致的初始模型;然后采用敏度优化算法优化初始模型,得到机翼带吊舱的优化模型。计算结果表明,优化模型与标准模型的颤振速度和频率均较为接近。     

A multi-objective multi-memetic algorithm for network-wide conflict-free 4D flight trajectories planning

Under the demand of strategic air traffic flow management and the concept of trajectory based operations (TBO),the network-wide 4D flight trajectories planning (N4DFTP) problem has been investigated with the purpose of safely and efficiently allocating 4D trajectories (4DTs) (3D position and time) for all the flights in the whole airway network.Considering that the introduction of large-scale 4DTs inevitably increases the problem complexity,an efficient model for strategic level conflict management is developed in this paper.Specifically,a bi-objective N4DFTP problem that aims to minimize both potential conflicts and the trajectory cost is formulated.In consideration of the large-scale,high-complexity,and multi-objective characteristics of the N4DFTP problem,a multi-objective multi-memetic algorithm (MOMMA) that incorporates an evolutionary global search framework together with three problem-specific local search operators is implemented.It is capable of rapidly and effectively allocating 4DTs via rerouting,target time controlling,and flight level changing.Additionally,to balance the ability of exploitation and exploration of the algorithm,a special hybridization scheme is adopted for the integration of local and global search.Empirical studies using real air traffic data in China with different network complexities show that the pro posed MOMMA is effective to solve the N4DFTP problem.The solutions achieved are competitive for elaborate decision support under a TBO environment.     

增强碳/碳球锥切削中的最小热应力优化研究

对将增强碳/碳纤维块体切削成球锥外形的工艺,块体热膨胀系数异性轴指向可以极大地影响球锥热应力大小,存在优化设计的潜力。本文对增强碳/碳不同主轴方向弹性模量比值下的球锥最小热应力优化特性进行了研究,发现以1为界,不同模量对比关系下的优化特征是完全不同的。在本文加热条件下,当异性轴模量小于同性面模量时,优化曲线对温度场变化很敏感,以块体异性轴和球锥横截面成±42.9夹角时热应力最小;当异性轴模量大于同性面模量时,优化曲线随加热时间变化不大,以块体同性面与球锥对称轴平行或成小锐角时热应力最小。一般而言,工艺设计中应避免用模量大的主轴方向指向球锥对称轴方向。