Structure of the Program of Short-term Prediction of Powerful Solar Flares

Input data of the system are two-dimensional images and one-dimensional distributions of total and polarized solar emission at 5.2 cm wavelength obtained with SSRT. Together with photoheliograms, magnetograms, Hα-filtergrams and characteristics of active regions received from other sources, they form the initial database. The first stage includes superimposing the images, identifying microwave sources with active regions, assigning NOAA numbers to the sources, and determining for each active region the heliolatitude, extent, and inclination angle of the group's axis to the equator. These data are used to calculate the boundaries of longitude zones for each active region. A next stage involves determining the brightness temperatures of microwave sources less than the polarization distribution, the degree of polarization, and microwave emission flux, as well as calculating the parameters of microwave sources. Each parameter is assigned its own value of the weight factor, and the sum of values is used to draw the conclusion about the flare occurrence probability in each active region and on the Sun in general.      

Experimental Study on Emission Performance of an LPP/TVC

A key issue in the commercial aircraft engine design is environmental acceptability, and designers are continually challenged to reduce emissions. In this paper, an experimental investigation is performed to evaluate the emission performance of a liquid-fueled trapped vortex combustor (TVC) under lean premixed prevaporized (LPP) mode. When operating as an LPP system, a TVC is fueled both in the cavities and in the main stream. The correlations between the emission performance and the total excess air ratio, the positions (4 positions) of the fuel injectors in the main stream, and the inlet temperature are obtained. Experi- mental results show that both the volume concentrations of unburnt hydrocarbon (UHC) and NOx (NO, NO2 usually grouped together as NOx) increase with the increase of total excess air ratio from 1.5 to 3.0; the emission performance relies heavily on the position of the main stream injector, and the best performance is achieved at Position 4 in the experiments; the increase of the inlet temperature impacts on the emission performance positively; the smallest volume concentrations of UHC and NOx obtained in the experiment are 94×10 6 and 2.3×10 6 respectively. This paper validates the feasibility of low emissions for an LPP/TVC and provides a reference for further optimization of TVCs.     

不同壁温及差分格式下超燃冲压发动机的仿真

针对圆截面超燃冲压发动机相关实验进行数值仿真,采用了不同的壁面温度条件和差分格式,并探究其对仿真结果的影响规律。结果表明采用常用的绝热壁面边界条件会导致激波边界层交互位置处的回流区变大,进而导致流道收缩,壁面压力升高。采用高精度格式不仅不能更为精确地计算回流区的大小,反而会使回流区面积变得更大。通过改变壁面边界条件,采用300 K的等温壁面,可以使激波边界层交互位置处的回流区变得极小,使仿真结果与实验结果十分吻合。计算结果表明,针对当前构型与实验条件,盲目提高数值格式的精度并不一定会得到更好的结果,相反可能会使仿真与实验更加偏离,而适当修改壁面温度条件,即使数值格式精度较低,仍然可以得到很好的仿真结果。最后,针对与实验结果吻合的仿真结果,分析了圆截面超燃冲压发动机的流场特性,重点研究了凹腔剪切层及其质量交换特性。     

改进BA优化的MKSVDD航空发动机工作状态识别

为了提高航空发动机工作状态识别准确率和效率,避免人工识别中存在的误判和耗时耗力问题,提出了基于混沌脉冲蝙蝠算法（CRBA）优化的多核支持向量数据描述（CRBA-MKSVDD）智能识别方法。研究了多核支持向量数据描述（MKSVDD）改进策略,引入混沌脉冲发射率提高了蝙蝠算法（BA）的收敛速度和收敛精度,得到了CRBA;通过CRBA优化MKSVDD的惩罚因子和核参数,同时对飞参数据进行了特征提取;基于特征飞参数据训练了CRBA-MKSVDD分类器,并对某型发动机一个飞行架次的工作状态进行了识别。结果表明,该方法识别准确率达到97.547 9%,可用于与发动机工作状态的相关研究和应用。      

大涡模拟进口合成湍流方法

进口瞬时湍流脉动条件直接影响大涡模拟的精度。对比研究了更适合工程应用的合成涡和合成谱方法,并通过考虑进口速度时间相关和随机数的概率密度分布,对合成谱方法进行改进。对零压力梯度平板湍流模拟结果的对比表明:不同湍流合成方法得到的合成湍流均存在发展为真实湍流的过渡过程;考虑进口湍流脉动的时间相关有助于合成湍流更快地发展为真实湍流,需要的流向距离更短;合成谱方法采用正态分布系数优于均匀分布,改进的合成谱方法优于常规合成谱方法。     

航空活塞式发动机瞬态空燃比控制仿真研究

针对航空活塞式直喷发动机瞬态空燃比难以精确控制、动态超调大等问题,采用基于改进的粒子群优化算法和Elman神经网络(VPSO-Elman网络)的模型预测控制算法对发动机过渡工况空燃比进行控制。在实验数据的基础上,利用发动机建模软件AMESim建立发动机模型,在MATLAB/Simulink中建立VPSO-Elman空燃比预测模型控制系统,通过联合仿真检验控制系统的性能。结果表明:瞬态工况下,相比于比例-积分-微分（PID）控制,VPSO-Elman网络模型预测控制下的空燃比超调量可以减小约20%,回调时间缩短约75%;针对不同的节气门开度变化速率,VPSO-Elman控制器同样具有良好的控制效果。      

高空环境下喷嘴参数对航空活塞发动机燃烧与性能的影响

以一台四缸四冲程压燃式航空煤油活塞发动机为研究机型,运用工程系统高级建模和仿真平台软件(AMESim)仿真软件建立了发动机的整机模型,并使用台架实验的采集数据对该仿真模型进行了验证。在高空环境中,仿真分析了飞行器起飞工况、最大巡航工况下发动机喷油器的不同喷孔数、孔径对发动机燃烧过程、性能和NOx排放特性的影响。计算结果表明:稳态工况下,随着喷孔数的增加,最高燃烧压力和温度增加,瞬时放热率增长速度快且峰值上升;同时,缸内预混燃烧得到强化,燃烧始点提前,滞燃期和燃烧持续期缩短,燃烧重心前移,循环热效率增高,但同时会提高NOx的生成量;在飞行器瞬态变海拔的起飞工况下,多喷孔数、小孔径的喷油嘴有利于航空活塞发动机在高空环境下恢复发动机功率,提升飞行器的动力性和续航性能。      

Homologous flare–CME events and their metric type II radio burst association

Active region NOAA 11158 produced many flares during its disk passage. At least two of these flares can be considered as homologous: the C6.6 flare at 06:51 UT and C9.4 flare at 12:41 UT on February 14, 2011. Both flares occurred at the same location (eastern edge of the active region) and have a similar decay of the GOES soft X-ray light curve. The associated coronal mass ejections (CMEs) were slow (334 and 337 km/s) and of similar apparent widths (43° and 44°), but they had different radio signatures. The second event was associated with a metric type II burst while the first one was not. The COR1 coronagraphs on board the STEREO spacecraft clearly show that the second CME propagated into the preceding CME that occurred 50 min before. These observations suggest that CME–CME interaction might be a key process in exciting the type II radio emission by slow CMEs.     

基于声发射的单层铝板高速撞击损伤类型识别

针对基于声发射技术的在轨航天器遭受空间碎片撞击损伤的评估问题,采用AUTODYN软件进行了弹丸超高速正撞击铝板所产生声发射波动信号的数值模拟,给出了二维模拟结果;对所得到的声发射信号进行小波重构,得到低频和高频部分的信号。通过研究低频和高频信号的峰值变化,发现第一和第二峰值幅度与撞击速度的变化具有一定的规律性,通过低频第二峰值幅度与第一峰值幅度比值将高速撞击损伤模式分为成坑、锥形穿孔和圆柱形穿孔三种类型。