中国空间大功率微波部件微放电抑制表面处理技术最新进展

材料表面的二次电子发射会触发和维持空间高功率射频器件的共振雪崩放电现象,这种现象又被称为微放电效应。微放电效应是限制空间大功率微波部件应用的关键问题之一。从微放电作用的机理出发,首先介绍了两种微放电类型（单表面与双表面）的基本物理机理;然后总结了当前主流的微放电抑制方法并给出各自应用于空间大功率微波部件时的限制。针对空间大功率微波部件微放电抑制的特殊问题,综述了国内近5年来在表面处理法抑制微放电领域的研究成果并预测了微放电抑制技术的发展趋势。     

Vibration signal-based chatter identification for milling of thin-walled structure

In high speed milling aeronautical part, tool condition monitoring(TCM) is very important, because it is prone to get a chatter owing to the low stiffness of thin-walled structures. And the TCM is key technology for automated machining. In this paper, aiming to chatter monitoring in thin-walled structure milling, a variational mode decomposition – energy distribution(VMD-ED)method is proposed to improve the identification accuracy. And a moving average root mean square – mean value(MARMS-MV) ide...     

温度参数下轴编C/C复合材料的超高温热结构性能分析

为了研究轴编碳/碳（C/C）复合材料的超高温热结构性能,开展了2800℃超高温载荷下复合材料的拉伸实验,表征了复合材料组分材料的高温失效形貌;提出了立方体单胞和正六棱柱单胞的温度周期性边界条件的算法和预测复合材料等效热结构参数的方法,在材料属性各向同性正六棱柱单胞模型上验证了方法的正确性;最后建立了轴编C/C复合材料的代表性体积单元,计算了复合材料随温度载荷变化下的等效热结构参数,与实验数据进行了对比分析。分析表明：开展的轴编C/C复合材料的超高温拉伸实验,可以得到复合材料在2800℃载荷下复合材料的等效刚度值,同时分析了轴向试件和径向试件的高温失效机理,径向试件的纤维束拉伸强度对复合材料的径向拉伸强度起到决定性的作用。在应用位移以及温度周期性边界条件的基础上,提出的方法可以得到随温度载荷变化下复合材料的等效热结构参数,得出复合材料在横向满足近似各向同性的特性,预测结果表明只改变温度参数下复合材料的等效热导率不会发生改变。提出的方法同样也适用于其他编织复合材料的热结构性能研究。     

发动机故障诊断的变记忆约束滤波算法

为提高故障诊断可靠性,给出了3种利用多次测量信息减少测量误差影响的方法,即变记忆约束滤波算法、分段算术平均预平滑算法以及指数顶平滑算法。其中,变记忆约束滤波算法能够有效地避免由于故障方程多重共线性所引起的病态解。证明了多故障诊断问题中滤波算法与分段算术平均算法的等价性,证明了在衰减滤波的条件下（第一变记忆因子小于1）,随测量点数的增加,变记忆滤波算法的第一变记忆因子与指数平滑的平滑系数之和趋近于1。利用计算机仿真方法对于所得结论进行了检验。     

1992年10月27日耀斑的多波段观测和分析

利用１９９２年１０月２７日耀斑极为完整的高质量观测资料,通过对可见光、软Ｘ射线和硬Ｘ射线图像和光谱的综合分析,诊断耀斑过程中的热与非热性质,结果表明,在这个事件中,热与非热过程并存且在时空演化上呈现不同的特征     

关于建立高阶差分格式的问题

为了能在不太密的网格上捕捉到流场的细致结构。通常采用高阶精度的差分 式进行数值模拟。为能抑制计算中和在激波附近产生的虚假波动,本文从物理构思出发,提出了建立高阶格式的两个基本原则,作者称之为抑制波动的原则和稳定性原则。     

Structure of the Program of Short-term Prediction of Powerful Solar Flares

Input data of the system are two-dimensional images and one-dimensional distributions of total and polarized solar emission at 5.2 cm wavelength obtained with SSRT. Together with photoheliograms, magnetograms, Hα-filtergrams and characteristics of active regions received from other sources, they form the initial database. The first stage includes superimposing the images, identifying microwave sources with active regions, assigning NOAA numbers to the sources, and determining for each active region the heliolatitude, extent, and inclination angle of the group's axis to the equator. These data are used to calculate the boundaries of longitude zones for each active region. A next stage involves determining the brightness temperatures of microwave sources less than the polarization distribution, the degree of polarization, and microwave emission flux, as well as calculating the parameters of microwave sources. Each parameter is assigned its own value of the weight factor, and the sum of values is used to draw the conclusion about the flare occurrence probability in each active region and on the Sun in general.      

Experimental Study on Emission Performance of an LPP/TVC

A key issue in the commercial aircraft engine design is environmental acceptability, and designers are continually challenged to reduce emissions. In this paper, an experimental investigation is performed to evaluate the emission performance of a liquid-fueled trapped vortex combustor (TVC) under lean premixed prevaporized (LPP) mode. When operating as an LPP system, a TVC is fueled both in the cavities and in the main stream. The correlations between the emission performance and the total excess air ratio, the positions (4 positions) of the fuel injectors in the main stream, and the inlet temperature are obtained. Experi- mental results show that both the volume concentrations of unburnt hydrocarbon (UHC) and NOx (NO, NO2 usually grouped together as NOx) increase with the increase of total excess air ratio from 1.5 to 3.0; the emission performance relies heavily on the position of the main stream injector, and the best performance is achieved at Position 4 in the experiments; the increase of the inlet temperature impacts on the emission performance positively; the smallest volume concentrations of UHC and NOx obtained in the experiment are 94×10 6 and 2.3×10 6 respectively. This paper validates the feasibility of low emissions for an LPP/TVC and provides a reference for further optimization of TVCs.     

不同壁温及差分格式下超燃冲压发动机的仿真

针对圆截面超燃冲压发动机相关实验进行数值仿真,采用了不同的壁面温度条件和差分格式,并探究其对仿真结果的影响规律。结果表明采用常用的绝热壁面边界条件会导致激波边界层交互位置处的回流区变大,进而导致流道收缩,壁面压力升高。采用高精度格式不仅不能更为精确地计算回流区的大小,反而会使回流区面积变得更大。通过改变壁面边界条件,采用300 K的等温壁面,可以使激波边界层交互位置处的回流区变得极小,使仿真结果与实验结果十分吻合。计算结果表明,针对当前构型与实验条件,盲目提高数值格式的精度并不一定会得到更好的结果,相反可能会使仿真与实验更加偏离,而适当修改壁面温度条件,即使数值格式精度较低,仍然可以得到很好的仿真结果。最后,针对与实验结果吻合的仿真结果,分析了圆截面超燃冲压发动机的流场特性,重点研究了凹腔剪切层及其质量交换特性。