气动换向阀阀芯/阀座撞击特性研究

针对某型气动换向阀在研制过程中出现由于阀芯/阀座撞击变形导致阀芯卡死的现象,对阀芯/阀座的撞击特性进行了仿真研究,定量分析了撞击过程以及不同阀座高度对撞击特性的影响,根据仿真结果对换向阀进行了改进设计,试验结果表明改进后的换向阀满足使用要求.     

多孔介质隔热材料中的辐射热传递分析

新型的多孔材料以其重量轻、强度高备受航天工程设计人员的亲睐,尤其是作为隔热材料使用,可以说是航天工程热防护系统的热门材料.多孔介质在辐射热传递方面具有吸收发射和散射的功能,这些功能在其接受外来热流的作用下,于内部达到热能量平衡,求解这一平衡方程就可以求出辐射热流在材料中的分布.由于求解这一方程的困难,许多学者对材料特性...     

XMM-Newton study of soft excess X-ray emission in clusters of galaxies

We discuss the detection of soft excess X-ray emission in a sample of 19 clusters of galaxies observed by XMM-Newton. In 6/19 clusters evidence for a soft X-ray excess is found. Four of these clusters show soft X-ray and O VII line emission from gas with a temperature of 0.2 keV. The centroid of this oxygen line is consistent with the redshift of the cluster. The intensity and spatial extend of the soft excess agrees with previous PSPC measurements. These observations are interpreted as emission from warm-hot intergalactic medium filaments, with density enhancements near the cluster centers, consistent with theoretical predictions. In the other two soft excess clusters a non-thermal origin is consistent with the data.     

多级最优控制问题的提法与求解变分法的应用

本文讨论多级最优控制问题,给出该问题的数学提法以及变分法求解原理。特别,详细研究了级间分离时刻的连接条件。本文的工作为解决多级最优控制问题提供了途径。     

Cosmic ray acceleration by supernova shocks

We analyse the results of recent measurements of nonthermal emission from individual supernova remnants (SNRs) and their correspondence to the nonlinear kinetic theory of cosmic ray (CR) acceleration in SNRs. It is shown that the theory fits these data in a satisfactory way and provides the strong evidences for the efficient CR production in SNRs accompanied by significant magnetic field amplification. Magnetic field amplification leads to considerable increase of CR maximum energy so that the spectrum of CRs accelerated in SNRs is consistent with the requirements for the formation of Galactic CR spectrum up to the energy ∼10¹⁷ eV.     

XMM-Newton survey of non-thermal shell candidates: Preliminary results on DA 530

The investigation of the general properties of non-thermal (NT) X-ray shell supernova remnants (SNRs), of which SN 1006 is the prototype, is important to understand how electrons are accelerated in SNR shocks and what is the origin of cosmic rays. Using the XMM-Newton satellite, we are carrying on a survey of putative non-thermal SNR candidates previously unknown or little studied in the X-ray band, in order to investigate the different manifestations of NT emission in SNR shells. The SNRs we have selected are likely to expand in a low density medium, and therefore to have a low thermal X-ray emission, that usually outshines the non-thermal one. We report here preliminary results obtained on the SNR shell DA 530.     

某型蒸发式稳定器气动及燃烧特性研究

为解决亚燃冲压发动机在高速低温来流条件下的可靠点火、火焰稳定和高效燃烧问题,对某型蒸发式火焰稳定器分别进行了冷态流场和燃烧流场的数值研究,并与常规V型火焰稳定器进行了对比分析。研究结果表明:在给定范围内,蒸发式稳定器随来流速度的增大,总压恢复系数和停留时间明显减小,回流区长度、回流率和燃烧效率变化不大;与相同槽宽的常规V型火焰稳定器相比,回流率明显减小,总压恢复系数、回流区长度和停留时间略有减小。蒸发式稳定器后部形成明显的回流区,且基本上不受外部主流流动的干扰,通过单独控制稳定器局部供油,可以使稳定器在最佳油气比下工作,有利于在高速来流条件下可靠工作。     

套齿连接转子简化建模及动力特性分析

在进行转子和整机计算时建立套齿结构接触模型会增加计算量，降低计算效率，直接将套齿结构省略又无法体现其刚 度特性变化对转子动力特性的影响。针对该问题，基于航空发动机单圆柱面套齿连接的结构和力学特征，建立了考虑构件间界面 接触状态的力学特征分析模型，提出了考虑套齿结构刚度随参数变化的简化建模方法，并与套齿接触模型进行了对比分析。建立 了单圆柱面套齿连接结构转子简化模型，开展了相应的转子动力特性试验，对比分析了拧紧力矩对转子模态频率的影响。结果表 明：转子简化模型与试验模型最大计算误差小于5%，证明套齿结构简化建模方法具有较高的可靠性和准确性，可为工程实践中高 效开展含套齿结构转子及整机动力学准确计算分析提供方法与参考。     

X-Ray Emission from Flare Collapsing Trap

An acceleration process in the collapsing magnetic trap, formed in the flare with cusp magnetic field topology, is described. Computations show that high-energy electrons are accumulated in the central part of the collapsing magnetic trap due to an increase of their pitch angles. The effect explains in a natural way the formation of X-ray loop-top sources. Then, using the model with the collapsing trap and considering only the adiabatic heating process, a possible explanation for the motion of the X-ray loop-top source observed at the beginning of some cusp-type flares is presented.     

不同接触形式下轮盘叶片系统的振动响应分析

以某压气机盘片系统为研究对象,基于ANSYS软件,建立了接触模型、接触不分离模型和刚性连接模型3种榫连结构接触约束形式下的盘片有限元模型,分别对3种模型进行了固有特性的分析,对比了三者的共振频率和振型;在离心力和气流激振力作用下,对3种模型进行了振动响应分析,得到三者的位移响应和应力随转速的变化规律。研究结果表明:接触模型和接触不分离模型的固有特性一致性较好,而刚性连接模型和接触模型在高频段存在较大差异。同时,刚性连接模型和接触不分离模型能够极大地改善接触模型在低转速下的收敛性。