离散系统仿真输出数据的统计分析

概括了分析仿真产生的数据的方法，讨论了离散系统仿真输出分析的目的以及应用统计方法的要求，对单变量情形，给出了有关估计来自终态仿真和和稳态仿真参数的技术。对多变量情形，以终态仿真为例，给出了用于分析离散系统的仿真输出的某些多变量统计技术，并提出均值向量的估计方法。     

综合后勤保障及其在工程系统研制中的应用

探讨了综合后勤保障在工程系统研制中的重要作用,及其在研制过程各个阶段中的应用。还讨论了保障性设计与工程设计接口关系及保障性设计中的风险分析。     

防止Ⅱ型驾驶员诱发振荡技术的研究

许多严重的飞行事故都与由速率限制引起的Ⅱ型PIO有关。针对如何预防PIO，首先介绍了自适应杆增益和软件限制环节的设计原理。然后以某带速率限制的电传飞机为例，运用同一理论，分析采用自适应杆增益和软件限制环节来改善速率限制的不利影响。仿真结果表明，自适应杆增益环节和软件限制环节都能抑制住PIO的发生，但两者组合加入抑制效果更好，飞行品质也能达到满意的程度。     

冲击响应谱（SRS）分析数字化方法探讨

本文介绍了求单自由度二阶系统冲击响应谱（ＳＲＳ）的几种常用的数字化分析方法：直接积分法；快速富氏变换（ＦＦＴ）法；递推法；数字滤波器方法；改进的数字滤波器方法。并比较了它们的优缺点。     

Cyclotron masers and solar spike bursts

The theory of electron cyclotron maser emission and its application to solar spike bursts are reviewed. By analogy with the Earth's AKR, three sources of free energy are considered: a loss-cone anisotropy, a velocity-space hole, and a trapped distribution. The problem of how the radiation escapes through the second harmonic absorption layer is emphasized. Harmonic emission due to z mode coalescence may operate for some bursts, but the 2–5s delay between hard X-ray bursts and spike bursts suggests that some other mechanisms is required for most spike bursts. A model involving formation of a trapped distribution in low-density regions neighboring the flaring flux tube is considered.     

GH169合金细晶锻造工艺研究

为了提高涡轮盘的强度和低周疲劳性能,要求锻件具有ASTM10级以上的细晶组织国外在大型压力机上采用低温大变形锻造和直接时效热处理以获得性能良好的细晶锻件,而我国则试图采用锻锤生产GH169合金涡轮盘锻件,因此,需要探索适合国情的GH169合金细晶锻造工艺。根据以往的研究,δ相对GH169合金的显微组织有明显影响,因而可     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

飞机座舱有机玻璃机械加工应力测量方法研究

 通过实验研究了有机玻璃由于机械加工所产生的双折射条纹的性质及其与机械加工应力的关系;建立了一种定量测定和无损检测平板有机玻璃和飞机座舱有机玻璃件机械加工应力的新方法:用光弹性仪可以测得与双折射有关的干涉条纹,则可确定加工应力。     

一种实用型报警装置的研制

本文综合地运用了５５５集成电路，ＴＷＨ９２４８，ＴＷＨ９２４９雷达式扫描探测传感集成电路的ＳＲ９Ｇ２６Ａ／Ｄ、Ｄ／Ａ转换语音存放电路等，中大规模集成电路。并利用一种简单的高频发射线路，而研制成的实用型报警装置。     

美陆军制导武器试验半实物仿真技术综述

主要综述美国陆军制导武器试验的仿真技术和设施，同时介绍仿真试验中使用的几种典型的目标景象投影技术，并说明了它们的应用范围和优缺点。最后介绍了当前制导武器试验仿真技术的发展趋势。