零质量射流推迟翼型失速的数值模拟

 通过在具有分离流动的翼型表面局部地引入零质量射流干扰,可以较小的能量代价实现对翼型绕流的全局性主动控制,从而达到抑制分离、推迟翼型失速的目的。本文发展了零质量射流与翼型绕流干扰的数值分析方法。在格心有限体积法的基础上,空间离散采用AUSM+up格式,时间推进运用含牛顿型LU-SGS子迭代的全隐式双时间法,且引入了预处理方法和多重网格法等技术。以TAU0015翼型失速主动控制为算例,通过在翼型上表面前缘附近引入零质量射流控制,使翼型失速特性得到改善。将计算结果与实验结果做了比较,验证了本文发展的数值模拟方法及程序的正确性。还以NACA0015翼型为例研究了射流动量系数、射流频率、射流偏角等关键参数对失速控制效果的影响,得出一些关于如何选择控制参数的结论。     

On Nonlinear-Evolution of C-type Instability in Nonparallel Boundary Layers

The process of evolution, especially that of nonlinear evolution, of C-type instability of laminar-turbulent flow transition in nonparallel boundary layers are studied by means of a newly developed method called parabolic stability equations （PSE）. Initial conditions, which are very important for the nonlinear problem, are investigated by computing initial solution of the harmonic waves, modifying the mean-flow-distortion, and giving initial value of TS wave and its subharmonic waves at initial station by solving linear PSE. A numerical method with high-order accuracy are developed in the text, the key normalization conditions in the PSE are satisfied, and nonlinear PSE are solved efficiently and implemented stably by the spatial marching. It has been shown that the computed process of nonlinear evolution of C-type instability in Blasius boundary layer is in good agreement with the experimental results.     

多重网格法在混合网格中的应用

设计了一种高效的混合网格聚合方法,在此基础上应用多重网格技术来加速Navier-Stokes方程的收敛过程.方程求解采用Jamson的中心格式有限体积法.对NACA0012翼型和ONERA M6机翼的粘性绕流进行了数值模拟,算例结果与试验结果符合良好,加速收敛效果显著.     

微型旋转翼与拍动翼气动力特性的比较

 用拟压缩性法求解三维非定常不可压N-S方程,研究了旋转翼及拍动翼的气动力和流场。当昆虫正常悬停时,如果翅膀旋转,产生的平均升力以及气动效率并不比拍动时的差,甚至还略好,因此,厘米级微型飞行器可以采用旋转翼,这比拍动模式容易实现。另外,小迎角旋转时升阻比可达3.1（在15°迎角,雷诺数4 000情况下）,气动效率较高而且升力系数不小,多个桨叶可以产生很大的升力。因此,在悬停时,多个桨叶小迎角旋转是厘米级微型飞行器的一个很好的方案。     

跨声速涡轮叶栅三维流场的数值模拟

以具有试验测量数据的一个高压涡轮动叶中截面平面叶栅和一个高压涡轮导向器环形叶栅为对象,采用计算流体动力学(CFD)软件CFX-TASCflow,对两个涡轮叶栅的跨声速三维粘性流场进行了数值计算,验证了CFX-TASCflow软件在航空燃气涡轮设计计算中的可靠性,并对所研究的跨声速涡轮叶栅粘性流场进行了分析.      

带控制舵椭圆截面飞行器的气动设计

非圆截面弹身布局在高超声速再入飞行器的机动能力、隐身特性、飞行性能和毁伤效能等方面具有许多潜在的优势,是当前飞行器设计的一个重要发展方向。本文进行了带舵的钝头椭圆截面双锥体的气动布局设计,进一步发展了快速有效的高超声速气动力工程预测方法,并将带舵椭圆截面双锥体的气动特性与带舵圆截面双锥体的气动特性进行了比较。研究表明,带舵的椭圆截面弹身布局方式可以获得较高的配平升力、配平升阻比及配平攻角,利用质心运动和控制舵偏转的综合控制可以获得更高的配平效率,是高超声速飞行器实现大升力、大升阻比飞行的潜在可行方案。     

共轴刚性旋翼桨毂阻力特性及流动机理

共轴刚性旋翼直升机在高速飞行时,桨毂流动复杂、分离强、阻力大。为明晰其阻力特性和流动机理,采用CFD方法针对已完成风洞试验的共轴桨毂组合模型进行数值模拟研究,获得了桨毂组合模型各单独部件的阻力、表面流动和空间流场特征,阐明了产生阻力最大的部件和影响阻力的主要因素,揭示了中间轴整流罩和塔座设计参数的减阻机制。分析结果表明:上、下旋翼桨毂是产生阻力的主要部件;中间轴和塔座的分离尾流对桨毂表面流动产生较大的干扰作用,使桨毂整流罩表面受干扰区域产生气流分离;具有较缓和逆压梯度的中间轴整流罩和塔座能有效减小分离尾流对桨毂整流罩的干扰,从而降低整个共轴桨毂系统的阻力。     

A transition prediction method for flow over airfoils based on high-order dynamic mode decomposition

This article presents a novel approach for predicting transition locations over airfoils, which are used to activate turbulence model in a Reynolds-averaged Navier-Stokes flow solver. This approach combines Dynamic Mode Decomposition (DMD) with e^N criterion. The core idea is to use a spatial DMD analysis to extract the modes of unstable perturbations from a steady flowfield and substitute the local Linear Stability Theory (LST) analysis to quantify the spatial growth of Tollmien–Schlichting (TS) waves. Transition is assumed to take place at the stream-wise location where the most amplified mode’s N-factor reaches a prescribed threshold and a turbulence model is activated thereafter. To improve robustness, the high-order version of DMD technique (known as HODMD) is employed. A theoretical derivation is conducted to interpret how a spatial high-order DMD analysis can extract the growth rate of the unsteady perturbations. The new method is validated by transition predictions of flows over a low-speed Natural-Laminar-Flow (NLF) airfoil NLF0416 at various angles of attack and a transonic NLF airfoil NPU-LSC-72613. The transition locations predicted by our HODMD/e^N method agree well with experimental data and compare favorably to those obtained by some existing methods (LST/e^N or $\gamma -\stackrel{￣}{R{e}_{\theta \text{t}}}$). It is shown that the proposed method is able to predict transition locations for flows over different types of airfoils and offers the potential for application to 3D wings as well as more complex configurations.     

数值模拟有外挂物的空腔流动

数值模拟了有外挂物存在的开式空腔的超音速流动。数值计算采用全隐式无分裂方法,湍流模型采用修正的B-L代数模型。研究了有外挂物存在的空腔流动的剪切层自持性振荡,并与无外挂物存在时的现象进行类比。压强与时间的变化曲线、空腔底部流向的静压系数分布以及空腔后壁面法向的静压系数分布表明,空腔内的压力脉动与外挂物所处位置是有关的。对于Rossiter振荡模态,数值计算结果能够与实验结果相吻合。     

不规则地形条件下双向DMFT电波传播特性算法研究

 在传统中心差分离散混合傅里叶变换(DMFT)抛物方程模型基础上,针对传统算法计算动态阻抗边界条件时的数值振荡及忽略后向传播与散射造成计算误差增大的问题,提出基于前-后向混合差分方法的递归双向DMFT(TW-DMFT)模型,以一阶前-后向差分方程代替传统的中心差分方程拟合阻抗边界条件,以递归双向传播模型改进传统单向预测模型.仿真分析了双向DMFT模型计算不同边界及媒介条件下单刃峰和实际地形的电波传播分布特性,与传统算法及几何绕射理论(GTD)进行比较,新算法提高稳定性及精度的同时弥补了传统算法的不足,更具有普适性.