行星际空间MHD模拟激波跃变关系分析

分析了模拟得到的可以传播到1AU以远的日地空间磁流体力学激波与Rankine-Hugnoniot跃变关系的符合程度．通过对模拟激波的结构及其在传播过程中的演化进行的分析，提出了模拟激波的定位方法；基于所提出的定位方法，利用向长青提出的确定MHD激波局地参数的方法计算了模拟得到的激波与Rankine-Hugnoniot跃变关系的偏差．结果表明在激波传播到100Rs以后，激波对中前向快激波与Rankine-Hugnoniot关系的符合达到很高的程度，相对误差在10^-2数量级以内；并且在激波传播到150 Rs以后，相对误差在10^-3数量级以内．这个结果说明文中所使用的有限差分数值格式能较好地模拟激波．     

双层多目标规划若干问题的研究

研究了下层决策者无关联的双层多目标规划问题，在不同偏好意义下，给出了各自解的定义，讨论了线性双层多目标规划问题。     

永磁电动机网格自动剖分

有限元法是一种可以用来求复杂工程问题近似解的数值方法,而求解域的网格自动剖分技术有明显的实用价值。本文根据网格自动剖分的一般原则,阐述了稀土永磁直流电动机矩形槽三角形单元的自动剖分方法及相应的几个功能子程序,并利用Auto CAD绘图软件包方便的实现了网格数据检查和图形显示。     

结构优化中的混合变量应力约束近似方法

提出一种处理结构优化应力约束的新近似方法，以往一般直接对应力约束按设计变量近似，本文用近似内力间接近似应力约束以得到更高的近似质量，根据对内力和设计变量关系分析，提出了内力按混合变量一阶泰勒展开的高捏近似方法。近似优化问题用约束变尺度法求解，最后按出了几个典型例题。结果表明该方法简单，有效，可靠。     

关于非结构网格生成中的背景函数

背景信息对于用阵面推进法生成非结构网格是一个关键的环节.文章基于众多文献中提到的背景信息提供方法,提出一种更为实用的背景信息提供技术.此方法不仅避免了不必要的机时,内存的消耗,又使网格具有光滑性,网格的生成具有灵活性,方便性的特点.基于生成的网格采用有限体积法研究无粘高超音速化学非平衡流的流场分布,生成的网格能够成功的运用于高超音速化学非平衡流的数值计算。     

正交加劲整体壁板稳定性分析

本文采用部分正交升阶谱板、梁组合元素分析正交加劲整体壁板的稳定性。给出受压屈曲时结构主要工程参数对局部屈曲、整体屈曲和混合屈曲的影响以及三种屈曲模态的相互关系。     

基于参数化模型和遗传算法的复合材料加筋壁板结构选型优化研究

针对复合材料加筋壁板的结构优化选型问题,采用辅助层压板和添加极小弹性模量材料的复合材料加筋壁板有限元建模方法,应用PATRAN/NASTRAN的参数化建模功能和遗传算法相结合的复合材料加筋壁板的优化方法,对5种复合材料结构形式进行了从2000N/mm到6000N/mm压缩载荷下的结构优化分析。结果表明,当载荷小于4500N/mm时,最有效的加筋壁板结构型式为J型;当压缩载荷大于4500N/mm时,最有效的加筋壁板结构型式为I型。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.