Electron density inversed by plasma lines induced by suprathermal electron in the ionospheric modification experiment

Incoherent scatter radar (ISR) is the most powerful ground-based measurement facility to study the ionosphere. The plasma lines are not routinely detected by the incoherent scatter radar due to the low intensity, which falls below the measured spectral noise level of the incoherent scatter radar. The plasma lines are occasionally enhanced by suprathermal electrons through the Landau damping process and detectable to the incoherent scatter radar. In this study, by using the European Incoherent Scatter Association (EISCAT) UHF incoherent scatter radar, the experiment observation presents that the enhanced plasma lines were observed. These plasma lines were considered as manifest of the suprathermal electrons generated by the high-frequency heating wave during the ionospheric modification. The electron density profile is also obtained from the enhanced plasma lines. This study can be a promising technique for obtaining the accurate electron density during ionospheric modification experiment.     

一个太阳硬X射线爆的观测特性

本文分析了1981年4月27日的一个特大高能爆发。它在硬X射线(HXR)、γ射线和微波(MW)记录上显示一一对应的多脉冲结构。文中讨论了这些脉冲的寿命、时延与HXR的能量、MW的波长之间的关系,发现时延量与湍动加速所预期的值相符合。提出了各脉冲期间的谱呈软→硬→软的演化,可能是由高能电子受到加速的看法。还对产生HXR的高能电子的谱指数、电子总数和MW源区的磁场也作了估计。      

太阳电子事件粒子源区的位置

对ISEE-3的引个太阳电子事件资料,进行了系统地分析。通过Saha平衡模型分别计算了高Fe事件和贫Fe事件源区的平衡温度大小,指出两类事件粒子源区不相重合,高Fe事件的粒子源区位于高色球层,贫Fe事件粒子源区在色球层-日冕之间的过渡区。对高Fe事件和贫Fe事件的形成作了初步的设想。      

聚甲基丙烯酸甲酯-b-聚苯乙烯共聚物的合成与表征

采用原子转移自由基聚合方法(A tom transfer rad ica l po lym erization,ATRP),以α-溴丙酸乙酯为引发剂,溴化亚铜和联二吡啶为催化体系,合成了端基为卤原子的单分散聚甲基丙烯酸甲酯(PMM A-X)预聚体。以此PMM A-X为大分子引发剂,在同样催化体系下,引发苯乙烯聚合,得到了分子量分布较窄的聚甲基丙烯酸甲酯-b-聚苯乙烯(PMM A-b-PS t)嵌段共聚物,并用红外光谱(IR)、核磁共振谱(1H-NM R)、凝胶渗透色谱(GPC)和透射电子显微镜(TEM)对其结构和形态进行了初步表征。结果表明,嵌段共聚物中聚甲基丙烯酸甲酯的质量百分数为28%,数均分子量(M n)为4.76×104,多分散系数(PD I)为1.49。经TEM表征,发现该嵌段聚合物具有周期性层状相分离结构,层状取向周期达到了400 nm左右,在紫外-可见波长范围内。这一特征长周期为嵌段共聚物材料用作光波导等光学器件提供了结构基础。     

冷轧无间隙原子钢中的微带生成机理

分析了冷轧体心立方金属中微带的形成原因.基于塑性变形理论,运用Taylor模型和Bishop＆Hill最大功原理,计算了变形体心立方晶体中滑移系上的切应变分布.计算结果表明,冷轧时当晶粒的轧向平行于晶粒的某些特定取向时,大量的局部切应变将集中产生在一个滑移面上并在此形成微带.这一高度局域性的切应变是形成剪切带的原因.此时,剪切带与轧制方向之间夹角为30°.另外,微带呈片状是双交滑移的结果,透射电子显微镜观察到的剪切带所在晶粒的取向和所在滑移面证实了这一微带的形成机制.     

太空环境下电子束原位制造技术

美国国家航空航天局（NASA）载人探索计划的提出给载人登月和载人火星等带来了机会和风险,NASA的工程师和科学家正在开展在月球或火星表面利用当地提炼的材料进行原位制造工艺技术的研究。首先,介绍了太空原位制造和修复（ISFR）技术的概念和特点,结合该技术的发展背景,介绍了电子束原位制造技术的概念、特点以及在太空环境下应用的优势和潜力。然后,根据所用原材料和成形工艺原理的不同,电子束原位制造技术又分为电子束熔融（EBM）和电子束自由成形制造（EBF³）技术两个分支,分别介绍了这两个分支技术的概念、原理、特点以及采用该技术研制出的零件的性能,结合硬件设备的情况介绍了在太空环境下应用的适用性,同时也详细介绍了NASA利用兰利研究中心的C-9抛物线飞行试验系统进行电子束原位制造微重力试验的研究成果、试验数据和未来的发展趋势。最后,结合中国未来空间事业发展的需要,提出了关于发展太空环境下电子束原位制造技术的设想与建议。     

民用航空发动机TA19电子束焊疲劳试验

针对民用航空发动机钛合金整体叶盘常用材料TA19开展其母材试件与电子束焊焊接试件在20,300,450℃的疲劳试验,通过焊接试件的焊缝材料断口与母材断口形貌的比较探讨了焊缝材料的疲劳破坏机理,并在104~106循环的疲劳寿命区间内采用Basquin模型分别建立了焊缝材料和母材的应力-疲劳寿命(S-N)曲线,结果显示母材试件与焊接试件的试验疲劳寿命大部分都落在了对应模型计算疲劳寿命的2倍线之内,表明试验得到的S-N曲线是合理的.焊接试件与母材试件的S-N曲线的对比分析表明,20℃时焊接试件的疲劳性能比母材试件略高,而在300℃和450℃时焊接试件与母材试件的疲劳性能差异随应力水平发生变化.但总地说来,在所关注疲劳寿命区间内,母材试件与焊接试件的计算疲劳寿命差异也在2倍线以内,初步表明两者的疲劳性能相当.      

辐射带高能电子通量波动与地磁暴警报

地球磁场捕获带电粒子形成辐射带,地磁场的扰动将导致带电粒子通量的变化.根据磁暴期间外辐射带高能电子通量起伏和波动的特点及规律,利用GOES卫星实时发布的5min分辨率高能电子微分通量数据,构建了高能电子通量波动指数,并分析了该指数与地磁活动的关系.结果表明,所提出的高能电子通量波动指数与地磁事件有很好的相关性,能起到地磁暴发生的指示剂作用,相对于目前空间环境业务化预报过程中广泛使用的3hKp指数,高能电子通量波动指数能更早地警报地磁暴的发生,是潜在有效的地磁暴警报辅助手段,能为空间环境预报中的地磁暴实时警报提供重要参考.      

150kV/30kW逆变式电子束焊接高压电源设计

针对150kV/30kW电子束焊接高压电源高电压、大功率输出的要求,低压电路采用IGBT (Insulated Gate Bipolar Transistor)逆变隔离直流电源与逆变全桥串联的主电路拓扑,高压电路由3组升压变压器与10倍压整流电路的串联结构并联组成;设计了高压采样电路、束流采样电路,以及双闭环控制电路.基于上述技术,实现了150kV/30kW高电压大功率输出.实验结果表明高压加速电源的输出线性度和束流输出线性度较好,同时高压稳定度和束流稳定度均在0.5%左右,能够满足电子束焊接的要求.     

Traveling ionospheric disturbances observed at South African midlatitudes during the 29–31 October 2003 geomagnetically disturbed period

This paper presents traveling ionospheric disturbances (TIDs) observations from GPS measurements over the South African region during the geomagnetically disturbed period of 29–31 October 2003. Two receiver arrays, which were along two distinct longitudinal sectors of about 18°-20° and 27°-28° were used in order to investigate the amplitude, periods and virtual propagation characteristics of the storm induced ionospheric disturbances. The study revealed a large sudden TEC increase on 28 October 2003, the day before the first of the two major storms studied here, that was recorded simultaneously by all the receivers used. This pre-storm enhancement was linked to an X-class solar flare, auroral/magnetospheric activities and vertical plasma drift, based on the behaviour of the geomagnetic storm and auroral indices as well as strong equatorial electrojet. Diurnal trends of the TEC and foF2 measurements revealed that the geomagnetic storm caused a negative ionospheric storm; these parameters were depleted between 29 and 31 October 2003. Large scale traveling ionospheric disturbances were observed on the days of the geomagnetic storms (29 and 31 October 2003), using line-of-sight vertical TEC (vTEC) measurements from individual satellites. Amplitude and dominant periods of these structures varied between 0.08–2.16 TECU, and 1.07–2.13 h respectively. The wave structures were observed to propagate towards the equator with velocities between 587.04 and 1635.09 m/s.