卫星表面放电效应模拟器研制

文章介绍了自行研制的卫星表面放电效应模拟器。根据模拟器基本原理和应实现的主要功能,提出了模拟器的技术指标和具体设计方案;研制了模拟器标定系统,并利用该标定系统对模拟器放电电压和放电电流脉冲特性进行了测试标定。结果表明所研制模拟器的放电特性符合卫星表面放电效应模拟试验的要求,可以用于表面放电效应评估。     

Solar power sail membrane prototype for OKEANOS mission

This paper reports on the manufacturing and evaluation of a solar power sail membrane prototype for the OKEANOS project. The in-house prototype was built by the Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency. Mechanical and electrical evaluation tests were conducted. The membrane, thin-film solar cells, reflectivity control devices were good condition after the manufacturing and handling. The improvements in the manufacturing process and design were found. The manufacturing process and design were fundamentally established. After the prototype, improvement plans for the manufacturing process and design were tried. We have a prospect of manufacturing the flight model sail and continue to the development.     

怎样使用高频氩放电色谱仪

简述了国标规定的氩气产品质量要求、检测原理、使用中常见问题及解决方法.     

介质阻挡放电等离子体的温度测量

在空气介质阻挡放电中,利用氮分子振动谱线和氮分子离子的转动谱线,研究了振动温度和转动温度在两极板间的分布情况。结果表明:越靠近极板振动温度越小,中间振动温度最高;而转动温度在两极板间基本保持不变。     

热喷涂层的加工技术

热喷涂层由于其优异的高硬、耐磨、防腐等特性得到了广泛的应用,但如何优质、高效、低损耗地对其加工一直是困扰人们的难题。本文较为详细介绍了国内、外目前在热喷涂层加工方面的研究进展,存在的问题,各种加工方法的优缺点及适用范围。     

钎焊式离心轮加工工艺研究

离心轮水力性能的优劣对泵的效率影响最大，离心轮加工质量好坏直接影响泵的特性。针对钎焊式离心轮加工的技术要求与技术难点进行分析、研究，结合现有数控设备对离心轮的加工工艺进行改进、优化及数控加工转化。     

大功率电动机软起动技术及其应用

本文介绍了几种适用于大功率电动机起动的软起动装置的工作原理,对其技术、经济性进行了比较,探讨了软起动装置在大型设施中应用的可行性.     

Corner-milling of Thin Walled Cavities on Aeronautical Components

This article presents a mathematical model of helical end-milling forces through experimental identification of the cutting coefficients and analyzes the changes of corner-milling forces under different conditions. In allusion to the corner-milling process, the relationship between working parameters and the corner coordinates is investigated by way of combination of tool tracing and cutting geometrodynamics. The milling parameters are optimized by changing the coordinates of tool center and working parameters without altering cutting forces. By applying the optimized parameters to milling practice, a comparison is made to show the improved product quality. Based on these optimized parameters, a finite element method (FEM) program is used to compute deformation values of a workpiece's corner, which evidences few effects that optimized parameters can exert on the corner deformation.     

Design and Experiments of Model-free Compound Controller of Flight Simulator

A model-free compound controller design method is proposed to achieve the wide frequency bandwidth requirement of flight simulators. The method based on quantitative feedback theory, acquires system uncertainty under different working conditions through closed-loop identification with power spectrum estimation. Then in controller designing, it makes a tradeoff between the strict requirements for magnitude-frequency characteristics and those for phase-frequency characteristics of flight simulators, by converting the indices of magnitude-frequency characteristics of flight simulators into quantitative feedback theory-based tracking specification bounds and using feedforward controller to attain the required phase-frequency characteristics. Simulation and experimental results indicate that, when used to design inner frame controller of flight simulator, the proposed method can fulfill the requirements for wide frequency bandwidth indices. Compared with other controller design methods, it has the property of model-free and transparency.     

万能工具显微镜技改中软件细分技术研究

探讨了光栅测量系统中的细分技术,提出了用A/D转换技术实现栅距脉冲软件细分的方法。以8位A/D转换器采用8区间划分为例,给出了小数值的计算公式并分析了细分误差。实验表明,该方法具有较大的实用价值。