多电发动机分布式控制系统总体方案研究

多电发动机控制系统十分复杂,需要采用分布式控制。分布式结构易于从部件级到子系统级再到系统级进行试验,同时大多数试验可通过仿真程序同步进行。基于某型发动机技术平台的分布式控制系统总体方案,在保留原平台的控制功能和控制规律基本不变的情况下,按多电发动机控制要求,大量采用电介质替代燃油介质实现控制功能,并按分布式控制方式进行系统总体方案设计。重点验证了新增控制功能、新原理控制元件和控制方法以及分布式控制总体运行模式,使其能在现有发动机平台上进行多电发动机分布式控制关键技术验证。     

Plasmasphere Response: Tutorial and Review of Recent Imaging Results

The plasmasphere is the cold, dense innermost region of the magnetosphere that is populated by upflow of ionospheric plasma along geomagnetic field lines. Driven directly by dayside magnetopause reconnection, enhanced sunward convection erodes the outer layers of the plasmasphere. Erosion causes the plasmasphere outer boundary, the plasmapause, to move inward on the nightside and outward on the dayside to form plumes of dense plasma extending sunward into the outer magnetosphere. Coupling between the inner magnetosphere and ionosphere can significantly modify the convection field, either enhancing sunward flows near dusk or shielding them on the night side. The plasmaspheric configuration plays a crucial role in the inner magnetosphere; wave-particle interactions inside the plasmasphere can cause scattering and loss of warmer space plasmas such as the ring current and radiation belts.     

电子设备的“三防”设计

本文针对电子设备的"三防"性能设计问题,从不同方面阐述实现电子设备的"三防"性能的方法和措施。     

航天产品深孔加工技术综述

在航空航天制造业中，深孔加工技术是一项仍在发展的综合技术。深孔加工是处于封闭或半封闭状态下进行的，加工难度主要体现在精加工工序上。深孔加工分为内排屑和外排屑两大类，不同的工艺选用不同的排屑方式。本文作者对难切削材料、深孔精密加工，加工实时监测进行了介绍，探讨了该领域的研究动向。     

航天电子产品整机的装联布线

文章介绍了航天电子产品整机装联布线的原则、注意要点、方法、顺序及常见问题的处理。     

计算机压电测压系统在弹道压力测量中的应用

介绍了计算机压电测压系统的组成、压电测压传感器的工作原理以及压电测压系统等效电路和标定     

高速冲击下块体金属玻璃动力学响应的实验研究

块体金属玻璃具有极高的力学强度,存在潜在的军事应用价值,实现其应用的关键在于认识材料在高应变率下的动力学行为特性。为此,利用飞片驱动速度可达3．5km／s的电炮加载装置,对一种新制备的锆基块体金属玻璃的动力学响应进行了实验研究。实验中,基于高精度DPS激光干涉仪测得的样品／窗口界面粒子速度波剖面,获得了新材料在应变率约为10^5／s下的冲击响应特性参数。在加载压力15～25GPa范围下,确定的Hugoniot弹性极限约为2．4GPa,线性拟合得到的冲击Hugoniot关系为Ds=（4．4±0．1）＋（0．58±0．08）up。     

复杂曲面零件五轴加工刀轴整体优化方法

 针对复杂曲面零件五轴加工中刀轴矢量变化剧烈、严重影响工件表面加工质量的问题,提出一种基于临界约束的五轴刀轴矢量整体优化方法。首先,构造了给定切触点处所有可行摆刀平面,并在摆刀平面内根据临界约束计算出临界刀轴矢量,在获得临界刀轴矢量的基础上,对其进行平面映射,建立了刀轴摆动的初始可行域;其次,通过对初始可行域进行均匀离散,根据离散点之间相对位置关系构造邻接矩阵,并结合最短路径搜索算法获得了初始参考刀轴,从而构造了新的刀轴摆动可行域;最后,建立当前切削行内无干涉且相邻刀轴变化最小的刀轴矢量优化模型,实现自由曲面五轴加工无干涉刀轴矢量的光滑控制。两种自由曲面叶轮的加工算例分析表明,采用本文方法获得的刀轴矢量可以明显改善机床的运动性能,避免了刀具干涉的产生,可提高复杂曲面零件的加工质量与效率。     

混合场积分方程在开放结构散射分析中的应用

针对复合开放闭合结构电磁散射问题的矩量法求解,通过修改混合场积分方程的建立方式,将混合场积分方程扩展应用到这类开放结构,大大提高了求解效率,数值算例证明了该方法的精度和效率。     

Wire electrochemical machining with axial electrolyte flushing for titanium alloy

Titanium and its alloys have found very wide application in aerospace due to their excellent characteristics although their processing is still a challenge. Electrochemical machining is an important issue in the fabrication of titanium and titanium alloys. Wire electrochemical machining (WECM) is mainly used for workpiece cutting under the condition of different thickness plates. It has a great advantage over wire electro-discharge machining, which is the absence of heat-affected zone around the cutting area. Moreover, the wire electrode in WECM could be used repetitively because it is not worn out. Thus, much attention has been paid to WECM. The effective way of removing electrolysis products is of importance to WECM. In this paper, the axial electrolyte flushing is presented to WECM for removing electrolysis products and renewing electrolyte. The Taguchi experiment is conducted to optimize the machining parameters, such as wire feedrate, machining voltage, electrolyte concentration, etc. Experimental results show that WECM with axial electrolyte flushing is a promising issue in the fabrication of titanium alloy (TC1). The feasibility of multi-wire electrochemical machining is also demonstrated to improve the machining productivity of WECM.