Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

弹载变转速定量泵高动态压力控制特性分析

传统弹载电液伺服系统的液压能源采用有刷直流电机驱动恒压变量泵的方式,泵源压力在导弹飞行过程中设定值恒定,但在平飞段过程长、负载小,对能源压力需求低,造成弹上能源总利用率不高的问题,提出无刷直流电机驱动小排量液压泵的压力控制泵源的设计,在低气动负载阶段适当降低系统压力,进而降低节流损失与泄漏量,提高能量利用率。分析了变转速定量泵的流量压力特性曲线,通过建立基于变转速压力控制泵源的位置电液伺服系统数学模型与仿真模型,分析了变转速定量泵压力控制系统在典型工况下的位置跟踪、系统压力变化与能量利用效率,验证了压力控制系统能够在导弹平飞段保证位置伺服系统跟踪正常的前提下,能有效提高系统效率,证明了变转速定量泵压力控制系统的有效性与可行性。     

新电位移边界条件下的压电介质断裂问题

应用边界元法,并结合一种特殊的复变函数基本解,研究了压电介质的断裂问题。由于该基本解完全遵循本构方程没有对电位移边界作假设,所以结论同非穿透性裂纹假设的结果有较大差异。通过计算表明,外加力载荷不但会引起裂纹尖端应力奇异性,也会引起电场奇异性,同样,外加电压也会引起裂纹尖端应力奇异性。     

Coupled Stress-Electricity Model for Electromagnetic Emission Induced by Concrete Fracture

Electromagnetic emission induced during concrete fracturing is of great significance to health monitoring of concrete structures.A coupled stress-electricity model is established by analyzing the interaction between stress and electricity during concrete fracturing.And based on this model,the electromagnetic radiation parameters are calculated.The theoretical calculation is well coincident with experimental results.This work provides theoretical support for concrete testing system.     

燃料电池电动车用隔离Boost全桥变换器的研究

针对燃料电池电动车辅助能源系统低压大功率、大升压比的特点,分析了几种隔离变换器方案,这几种方案均难以做到大功率应用。为此,提出了采用隔离Boost全桥变换器拓扑方案可有效地解决上述技术难点。文中介绍了该方案的原理,详细分析了控制系统,给出了数字化控制的实现方法和主电路关键参数的设计。为了验证上述方案的正确性,设计了5 kW,24 V输入300 V输出的隔离Boost全桥变换器。实验结果表明,系统具有良好的动态和静态性能,能有效地应用于电动汽车等领域。     

C-dump变换器供电的无刷直流电机换相转矩脉动的分析

研究了基于Ｃ－ｄｕｍｐ变换器的无刷直流电机的换相转矩脉动,分析了换相转矩脉动产生的原因,对换相电流变化率、储能电容电压和转速对换相转矩脉动的影响进行了仿真分析。提出了减小换相转矩脉动的措施,并给出了实验波形和实验结果。     

基于主动转向干预的EPS系统转向盘力矩突变修正策略

在研究融合主动转向功能的电动助力转向系统实现原理的基础上,分析转向系统的力矩和角位移传递特性。针对主动转向干预时转向盘力矩发生突变的问题,提出一种适用于全车速范围的助力电机前馈助力修正策略。为验证所提出的前馈助力修正策略的修正效果,进行主动转向干预时转向盘力矩阶跃仿真试验。仿真结果表明:该策略有效地削弱了伴随主动转向干预同时出现的转向盘力矩突变,且在高速时该修正策略仍然有效,改善了主动转向干预时转向系统的转向路感。     

离子与霍尔电推进性能和质量的工程数据模型

为了提供航天工程任务设计时优选离子或霍尔电推进的通用对比分析方法,基于工程数据建立了包括推力器、电源处理单元、推力器选择单元、控制单元、推进剂气瓶、调压单元、流率单元、推力器支架、电缆、管路等产品的电推进的性能和质量经验模型。在此基础上通过推导建立了电推进系统干质量通用模型,模型变量参数包括推力器功率、推力器数量和推进...     

Measurement of mass diffusion coefficients of O_2 in aviation fuel through digital holographic interferometry

The experimental apparatus to measure the mass diffusion coefficients of O2 in aviation fuel was constructed based on the digital holographic interferometry method. The theory of mass diffusion coefficient and interference image processing were introduced in detail. The accuracy of the experiment was verified by measuring the mass diffusion coefficient of 0.33 mol/L KCl in aqueous solution at 298.15 K. The mass diffusion coefficients of O_2 in RP3 and RP5 aviation fuels were measured at temperature from 278.15 K to 333.15 K, and the Arrhenius equation was employed to fit the experimental data. In terms of the Stokes-Einstein equation, the viscosities of these two aviation fuels were tested to estimate the correlation among mass diffusion coefficient, viscosity and temperature. A uniform polynomial calculation correlation was proposed to predict the mass diffusion coefficients of O_2 in both RP3 and RP5 aviation fuels, and its accuracy is considerably higher than that of the Stokes-Einstein equation.     

3D打印骨架增强石蜡燃料燃烧机理实验研究

针对固-液混合火箭发动机中石蜡基固体燃料机械性能差的问题,使用3D打印聚合物骨架镶嵌石蜡的方法增强了石蜡基燃料的结构强度,分析了骨架增强石蜡燃料在直/旋流喷注下的燃烧机理。通过对七种骨架材料进行SEM扫描、力学、热力学分析和纯氧条件下的燃烧试验,获得了不同骨架材料的微观表面结构、机械性能、热分解性能以及在纯氧环境下的燃烧性能;使用直/旋流固-气掺混燃烧试验系统,开展了螺旋型和六角型骨架增强石蜡燃料的燃烧试验,并与ABS固体燃料进行了对比。结果显示,在多种骨架材料中,ABS材料加工性能、机械性能及热分解性能良好;燃烧过程中,骨架增强石蜡燃料结构稳定性良好,石蜡液滴主要出现在石蜡-骨架交界处;旋流喷注和螺旋型骨架可促进石蜡液滴的夹带现象;在直流喷注工况中,骨架的凹槽结构增加了燃料与氧化剂的接触面积,尾部骨架结构具有稳焰作用,可促进后燃烧室的掺混燃烧;石蜡燃料和骨架燃速差异较大,发动机内弹道性能可能受此影响。