Study of the 28 October 2003 and 20 January 2005 solar flares by means of 2.223 MeV gamma-emission line

By the data on intensity-time profiles of the neutron capture line of 2.223 MeV we have studied some characteristics of two solar flares, 28 October 2003 and 20 January 2005 (INTEGRAL and CORONAS-F observations, respectively). The SINP code was applied making allowance for the main processes of neutron interactions and deceleration in the solar plasma, character of neutron source, losses of neutrons and density model of the solar atmosphere. Comparison of the computed time profiles of 2.223 MeV line with observed ones for the flare of 28 October 2003 confirms the results obtained earlier for three other flares. Namely, the effect of density enhancement (EDE) in the sub-flare region, as well as the variations (hardening) of accelerated particle spectrum in the course of the event have been confirmed. The usual modeling procedure by the SINP code, however, seems to be inapplicable to the event of 20 January 2005. Possible causes of density enhancements during some flares and peculiarities of the 20 January 2005 flare are discussed.     

电磁超介质研究进展

电磁超介质是当前电磁学和物理研究领域中的前沿与热点，文章将左手材料、复合左／右手传输线、光子晶体统一在电磁超介质的体系下进行介绍，并论述了电磁超介质的发展现状。     

基于DIY理念的苏州旅行社线路配置现状研究

DIY作为时尚消费理念风靡全世界，而随着休闲性、体验性等新的旅游元素渗入传统旅游方式．DIY旅游在各大城市城市兴起。本文通过在线调查和咨询的方式，对国家级旅游城市——苏州旅行社DIY旅游线路配置的现状进行了研究，进而提出自己的意见和看法。     

实现程控化焊接两圆形管件的几何建模及计算方法

将圆形管件焊接成三通、四通等是焊接行业经常遇到的工艺。采用传统的手工式切割与焊接不仅工艺粗糙，而且效率也低。现代的焊接设备以其高效、自动化、程控化逐步取代手工操作。将提供各种形状的管件以不同连接形式焊接与切割以实现自动化、程控化的计算方法。     

Comparison of Polar and Equatorial Coronal Holes Observed by UVCS/SOHO: Geometry and Physical Properties

We analyzed UVCS/SOHO data and compared the H I Lyα (121.6 nm) and O VI (103.2 nm, 103.7 nm) emission in the polar and equatorial coronal holes. We found that the emission lines have similar characteristics in these two types of coronal holes. Both types show evidence for superradially diverging boundaries. The latitudinal distribution of the O VI line ratio may indicate that the equatorial coronal hole has O⁺⁵ outflow velocities lower than in the polar coronal holes. This revised version was published online in June 2006 with corrections to the Cover Date.     

四杆机构转折圆及其应用

介绍了转折圆的运动学特性，论述了求铰链四杆机构的转折圆，以及利用转折圆进行铰链四杆机构近似直线导向设计的方法。     

UVCS/SOHO Observations of H I Lyman Alpha Line Profiles in Coronal Holes at Heliocentric Heights Above 3.0 R⊙

The Ultraviolet Coronagraph Spectrometer (UVCS) on the Solar and Heliospheric Observatory (SOHO) has been used to measure spectral line profiles for H I Lyα in the south polar coronal hole at projected heliocentric heights from 3.5 to 6.0 R_⊙ during 1998 January 5–11. Observations from 1.5 to 2.5 R_⊙ were made for comparison. The H I Lyα profile is the only one observable with UVCS above 3.5 R_⊙ in coronal holes. Within this region the outflowing coronal plasma becomes nearly collisionless and the ionization balance is believed to become frozen. In this paper, the 1/e half widths of the coronal velocity distributions are provided for the observed heights. The velocity distributions include all motions contributing to the velocities along the line of sight (LOS). The observations have been corrected for instrumental effects and interplanetary H I Lyα. The half widths were found to increase with projected heliographic height from 1.5 to 2.5 R_⊙ and decrease with height from 3.5 to 5 R_⊙. This revised version was published online in June 2006 with corrections to the Cover Date.     

Be／X射线双星LSI＋61°303的光谱研究

给出了１９９２－１９９５年Ｂｅ／Ｘ射线双星ＬＳＩ＋６１°３０３每年的光谱观测结果，分析了光谱发射线轮廓及其变化，观测显示Ｈβ发射线轮廓具有典型的气壳吸收，表明观测视线与Ｂｅ星赤道平面平行，同时发现Ｈα发射线参数发等值宽度和双峰强度之比也具有类似射电流量的周期性变化，但其变化与射电玫光学光度的变化不同，因此认为此变化可能与中子星周期的吸积盘及其轨道交食有关。     

基于视线角速率的最优增量制导技术研究

提出一种基于视线角速率最优的制导方案。方案从最优控制的性能指标函数出发,通过求解一个Riccati方程和相关约束条件,并对系统进行一系列的相关的理想化的假设,得到系统的一般形式的制导指令。同时,为了避免制导指令在正负之间的频繁切换,根据偏置比例制导的原理,在制导指令中引入一个制导指令的增量,来减轻这一问题,并与传统的比例制导进行比较。仿真结果表明,这种制导方法相对于比例制导律而言,精度较高,性能优良,具有一定工程参考意义。