On the anthropogenic and natural injection of matter into Earth’s atmosphere

Every year, more and more objects are sent to space. The increasing number of countries with space programs, advancing commercialization, and ambitious satellite constellation projects raise concerns about space debris and the increase of mass flux into the atmosphere due to deorbiting of satellites and rocket bodies. A comparison of this anthropogenic influx to the natural influx due to meteoroids is presented giving detailed information about the mass, composition and ablation of the entering matter. Currently, anthropogenic material does make up about 2.8% compared to the annual injected mass of natural origin. For two different future scenarios considering planned and already partially installed large satellite constellations this fraction increases to nearly 13%, respectively 40%. For these cases, the anthropogenic injection of several metals prevails the injection by natural sources by far. Considering different ablation products, we find that the anthropogenic injection of aerosols into the atmosphere increases disproportionately. Today, they make up about 1% compared to the injected aerosol mass of natural origin, increasing to 30% and 94% for the two future scenarios, respectively. Considering the injection of atoms, the natural injection is dominant by far. For the two future scenarios, the anthropogenic injection is only at 5%, respectively 15% compared to the annual natural atom injection. The predicted strong increase in anthropogenic injection will make it significant in comparison to the natural injection which can have yet unknown effects on Earth’s atmosphere and the terrestrial habitat.     

Experimental study of curvature effects on jet impingement heat transfer on concave surfaces

Experimental study of the local and average heat transfer characteristics of a single round jet impinging on the concave surfaces was conducted in this work to gain in-depth knowledge of the curvature effects. The experiments were conducted by employing a piccolo tube with one sin-gle jet hole over a wide range of parameters: jet Reynolds number from 27000 to 130000, relative nozzle to surface distance from 3.3 to 30, and relative surface curvature from 0.005 to 0.030. Exper-imental results indicate that the surface curvature has opposite effects on heat transfer characteris-tics. On one hand, an increase of relative nozzle to surface distance (increasing jet diameter in fact) enhances the average heat transfer around the surface for the same curved surface. On the other hand, the average Nusselt number decreases as relative nozzle to surface distance increases for a fixed jet diameter. Finally, experimental data-based correlations of the average Nusselt number over the curved surface were obtained with consideration of surface curvature effect. This work con-tributes to a better understanding of the curvature effects on heat transfer of a round jet impinge-ment on concave surfaces, which is of high importance to the design of the aircraft anti-icing system.     

临近空间高超声速飞行器天文导航系统综述

临近空间是航天与航空业务领域的结合部，具有重要的战略价值。高超声速飞行器是临近空间力量部署的重要载体，已逐渐进入应用部署阶段。临近空间高超声速飞行器的飞行环境和任务条件对导航系统提出了新的更高要求。在总结临近空间高超声速飞行器的导航技术研究进展的基础上，对天文导航技术的应用环境和条件进行了系统的分析和探讨，提出了5个重点研究方向，包括：星图采集效能、光学误差模型、视场观测机理、姿态更新速率、小型化模块化工程化等。研究结果可为临近空间高超声速飞行器天文导航系统的设计提供参考。     

水/金属燃料发动机水滴蒸发非傅里叶效应研究

水／金属燃料发动机单液滴蒸发拟选用表面模型假设,为了验证此假设的正确性,采用了修正的傅立叶定律,并分析了其物理意义及适用范围。通过试验验证及分析计算,从理论上证明,表面模型假设适用于水／金属燃料发动机水滴内部的输运过程。     

舰载机着舰舰面效应及其补偿方法研究

根据舰面效应的作用机理,分析了舰面效应对舰载机着舰的影响,总结了舰载机在不同着舰模式下的舰面效应补偿方法.针对舰载机自动着舰模式,通过分析舰面效应所产生的附加升力造成的着舰偏差,提出了引导信号指令修正的舰面效应补偿方法,并给出了舰面效应自动补偿方法的具体流程,分析了自动补偿方法的特性及其应用面临的关键问题.     

蜂窝状薄壁管拉伸时的收缩分析

为研究蜂窝材料拓扑结构与其整体力学性能的关系，从非平面Vertex模型的势能形式出发，结合蜂窝薄壁管拉伸时的轴对称特征，通过变分法得到了管拉伸时母线满足的控制方程，证实了边界效应是蜂窝状薄壁管受拉时产生收缩的原因，并结合控制方程的若干特解，考察了非平面Vertex模型中材料参数对管弯曲程度的影响。结果表明，非平面Vertex模型中表征夹角势强度的参数决定了材料的整体抗弯性，而距离管端最近的3层元胞是管拉伸时的主要收缩区。最后进一步探讨了蜂窝薄壁管曲率与收缩幅度之间的非线性关系，揭示了构型曲率是蜂窝材料泊松比的影响因素之一。     

Effects of tooth bending damage on the leakage performance and rotordynamic coefficients of labyrinth seals

Tooth bending damage resulting from an intense impact by the rotor sometimes occurs in the transient operation. To investigate the influence of after-damage clearance and tooth bending length on the leakage performance and rotordynamic coefficients of labyrinth seals, three tooth bending damages were taken into consideration, including the unbent tooth damage (abbreviated as Unbent), the partial tooth bending damage (abbreviated as Pbent) and the complete tooth bending damage (abbreviated as Cbent). The transient CFD solution was utilized to calculate the leakage flow rates and rotordynamic coefficients of labyrinth seals with clearances of 0.3, 0.4, 0.5, 0.6 mm for three tooth bending damages. The obtained result shows that the Unbent tooth damage leaks least while the Pbent tooth bending damage leaks most, and an increase of 6.1% for Cbent tooth bending damage and an increase of 19.4% for Pbent tooth bending damage are discovered at the tooth clearance of 0.6 mm in comparison with the Unbent tooth damage. Compared to the Unbent tooth damage, the effective damping for Pbent tooth bending damage and Cbent tooth bending damage is lower and drops by 9.7%–33.6% and 8.5%–22.6% respectively at the tooth clearance of 0.6 mm, suggesting that Pbent tooth bending damage or Cbent tooth bending damage tends to weaken the seal stability when compared to the Unbent tooth damage.     

A novel range-Doppler imaging algorithm with OFDM radar

Traditional pulse Doppler radar estimates the Doppler frequency by taking advantage of Doppler modulation over different pulses and usually it requires a few pulses to estimate the Doppler frequency. In this paper, a novel range-Doppler imaging algorithm based on single pulse with orthogonal frequency division multiplexing(OFDM) radar is proposed, where the OFDM pulse is composed of phase coded symbols. The Doppler frequency is estimated using one single pulse by utilizing Doppler modulation over different symbols, which remarkably increases the data update rate. Besides, it is shown that the range and Doppler estimations are completely independent and the well-known range-Doppler coupling effect does not exist. The effects of target movement on the performances of the proposed algorithm are also discussed and the results show that the algorithm is not sensitive to velocity. Performances of the proposed algorithm as well as comparisons with other range-Doppler algorithms are demonstrated via simulation experiments.     

对新型SAR欺骗干扰效果的评估方法

欺骗干扰效果评估是SAR对抗领域的热点和难点问题。基于新型欺骗干扰的特点,给出欺骗度和压制度的表征方式,并提出一种将欺骗度和压制度相结合的综合评估方法。该方法不仅可利用干扰前后目标轮廓特征的变化描述欺骗干扰逼真度,而且根据图像ROI压制度的分析实现对欺骗度的验证,并结合人工决策模式得到了干扰样式优选的判决条件。实验结果表明,这种评估方法不仅能够有效地对新型欺骗干扰的对抗效果作出评价,而且引入了一定的信息反馈机制,使得评估结论的针对性更强,可靠性更高。     

飞机机电系统PHM的综合诊断推理机设计

在分析区域级PHM功能及区域管理器结构的基础上,开展了综合诊断推理机设计基础准备工作,包括机电系统功能建模、aFMECA分析、机电系统关联分析。最终,设计出飞机机电系统PHM综合诊断推理机的结构及其工作流程。所设计的综合诊断推理机综合了以往多种推理机的推理机制,更加系统全面地实现了对飞机机电系统的综合诊断功能,具有一定的工程应用价值。