丁腈橡胶/酚醛树脂/受阻酚AO80三元阻尼橡胶的结构与性能

在丁腈橡胶(NBR)中添加酚醛(PR)和受阻酚AO80,制备NBR/PR/AO80三元共混橡胶.采用DSC,FTIR和扫描电子显微SEM镜等方法表征了NBR/ PR/ AO80三元共混橡胶的结构,研究了其阻尼性能和力学性能.结果表明,AO80与丁腈橡胶和酚醛树脂有较好的相容性,动态力学性能温度谱中损耗角正切tanδ呈现单峰特征,并且随AO80含量增加,三元共混橡胶的阻尼峰值提高;硫化胶的拉伸强度呈现先增加后降低趋势.与NBR/PR硫化橡胶相比,添加AO80的三元共混橡胶保持了几乎相同的阻尼温域,但却具有更高的阻尼峰值.     

无人机航迹规划技术研究及发展趋势

通过对无人机航迹规划的研究,构建了无人机航迹规划的结构框架;分析了无人机系统约束及威胁场约束,探讨了无人机航迹几何建模方法及规划算法的国内外研究概况;并着重分析了规划算法。最后,阐述了无人机航迹规划面临的关键问题及发展趋势。     

航空发动机风扇转子叶片外物损伤I.鸟撞击试验研究(英文)

本文改进了叶片鸟撞击试验条件。对某型发动机风扇一级转子叶片进行了鸟撞击试验。通过对叶片的鸟撞击瞬态响应分析和撞击前后叶片叶型变化的分析,验证了风扇一级转子叶片的抗鸟撞击性能,为某型发动机风扇转子叶片的抗外物损伤设计提供了依据。     

Fe/O Ratios in Interplanetary Shock Accelerated Particles

It is widely accepted that diffusive shock acceleration is an important process in the heliosphere, in particular in producing the energetic particles associated with interplanetary shocks driven by coronal mass ejections. In its simplest formulation shock acceleration is expected to accelerate ions with higher mass to charge ratios less efficiently than those with lower mass to charge. Thus it is anticipated that the Fe/O ratio in shock-accelerated ion populations will decrease with increasing energy above some energy. We examine the circumstances of five interplanetary shocks that have been reported to have associated populations in which Fe/O increases with increasing energy. In each event, the situation is complex, with particle contributions from other sources in addition to the shock. Furthermore, we show that the Fe/O ratio in shock-accelerated ions can decrease even when the shock is traveling through an Fe-rich ambient ion population. Thus, although shock acceleration of an Fe-rich suprathermal population has been proposed to explain large Fe-rich solar particle events, we find no support for this proposal in these observations.     

基于放气控制的飞机轮胎自动充气装置设计

根据国内飞机轮胎充气工作的现状,设计了一种基于放气控制的飞机轮胎自动充气装置,介绍了基于此种方式的充气及检测控制过程,针对以往充气装置的不足,此控制方式能够提高轮胎充气及检测的精度。并通过实验证明系统设计合理,满足设计要求,且系统效率高、性能稳定、操作方便,具有较好的经济效益及社会效益。     

Solar Sources of Heliospheric Energetic Electron Events—Shocks or Flares?

Electrons with near-relativistic (E≳30 keV, NrR) and relativistic (E≳0.3 MeV) energies are often observed as discrete events in the inner heliosphere following solar transient activity. Several acceleration mechanisms have been proposed for the production of those electrons. One candidate is acceleration at MHD shocks driven by coronal mass ejections (CMEs) with speeds ≳1000 km s⁻¹. Many NrR electron events are temporally associated only with flares while others are associated with flares as well as with CMEs or with radio type II shock waves. Since CME onsets and associated flares are roughly simultaneous, distinguishing the sources of electron events is a serious challenge. On a phenomenological basis two classes of solar electron events were known several decades ago, but recent observations have presented a more complex picture. We review early and recent observational results to deduce different electron event classes and their viable acceleration mechanisms, defined broadly as shocks versus flares. The NrR and relativistic electrons are treated separately. Topics covered are: solar electron injection delays from flare impulsive phases; comparisons of electron intensities and spectra with flares, CMEs and accompanying solar energetic proton (SEP) events; multiple spacecraft observations; two-phase electron events; coronal flares; shock-associated (SA) events; electron spectral invariance; and solar electron intensity size distributions. This evidence suggests that CME-driven shocks are statistically the dominant acceleration mechanism of relativistic events, but most NrR electron events result from flares. Determining the solar origin of a given NrR or relativistic electron event remains a difficult proposition, and suggestions for future work are given.     

冲击响应谱绝对校准研究中冲击响应谱的计算方法

介绍了应用于冲击响应谱绝对校准中的冲击响应谱的计算方法,该方法的实现基于MATLAB编程语言,即通过MATLAB中的仿真直接求解单自由度二阶微分方程的数值解以获得冲击响应谱的绝对复现.     

新一代数据采集器模拟量采集插件设计技术

数据采集器是飞行试验关键的测试设备,它的性能与现代飞机飞行试验有很大的关系.为满足现代飞机设计定型的需求,新一代数据采集器设计大量采用了FPGA和DSP器件,大大提高了采集器测量参数的采样率、通道数、测量参数类型和使用的灵活性.本文介绍的新一代采集器模拟量采集卡设计技术,用数字信号处理技术来实现信号的放大、滤波及偏置修正,并提供了对采集卡各个部分进行设计的理论依据.     

某型先进发动机燃油喷嘴雾化特性的试验研究及火焰筒头部数值模拟

使用相位多普勒粒子分析仪和激光多普勒粒子测速仪系统(PDPA/LDV)等设备测量了某型航空发动机喷嘴的雾化特性,主要包括:喷嘴流量特性,雾化粒度(SMD)和喷雾锥角。应用Fluent软件,对装用该喷嘴的燃烧室火焰筒进行了数值模拟。试验和计算结果得出了一些有价值的结论,对该发动机的燃油喷嘴和火焰筒头部温度场、速度场有深入了解,对其改进提供了重要依据。     

民机的一种新型布局形式——翼身融合体飞机

 讨论了一种区别于机翼与圆柱机身的传统民机外形——翼身融合体（BWB）外形。从给定容积下减少浸润面积和摩擦阻力的考虑发展出了翼身融合体的概念。在满足系列设计约束条件下讨论了适于大型（800座）客机的翼身融合体的技术和商业上的可能性。概念设计研究表明,翼身融合体外形可获得比常规外形更好的性能。巡航升阻比可从传统外形的19提高至23。480座的BWB外形与同量级的传统外形（A380-700）相比,最大起飞重量可减少18%,每座位燃油消耗可减少32%,具有良好的环保性。通过气动载荷分布规律的反设计,翼型修型和三维优化设计等气动设计方法可以有效减阻和提高BWB的气动性能。由于BWB的高度融合性,讨论了多学科优化设计方法的重要性和有效性。BWB概念能够发展成BWB系列机,进一步提高巡航马赫数也是可能的。