防热材料热解与氧化性能试验技术研究

介绍了利用Arrhenius方程开展材料烧蚀热解性能动力学特性的基本原理，试验测试方法。并通过对炭酚醛材料烧蚀动力学参数的高频等离子体风洞试验研究，验证了采用时间历程积分在试验结果处理中的可靠性，在此基础上采用平板试验技术获得炭酚醛材料在600～1200K温度范围内的表面质量烧蚀率动力学方程，并将该方程所预测的结果与采用驻点烧蚀技术所获得的结果进行比较。结果显示：二者最大误差不超过5％，通过理论初步分析了二者之间存在差异的主要原因，并在试验比较分析的基础上，采用最大误差限理论分析了试验结果的可靠性。     

无人机载SAR一体化显控系统的设计研究

阐述了无人机载SAR一体化显控系统的设计,对系统实现中应用到的一些关键技术进行了详细说明,就多位面技术、多线程技术及内存映射技术进行了探讨。     

Adaptive mesh refinement computation of acoustic radiation from an engine intake

A block-structured adaptive mesh refinement (AMR) method was applied to the computational problem of acoustic radiation from an aeroengine intake. The aim is to improve the computational and storage efficiency in aeroengine noise prediction through reduction of computational cells. A parallel implementation of the adaptive mesh refinement algorithm was achieved using message passing interface. It combined a range of 2nd- and 4th-order spatial stencils, a 4th-order low-dissipation and low-dispersion Runge–Kutta scheme for time integration and several different interpolation methods. Both the parallel AMR algorithms and numerical issues were introduced briefly in this work. To solve the problem of acoustic radiation from an aeroengine intake, the code was extended to support body-fitted grid structures. The problem of acoustic radiation was solved with linearised Euler equations. The AMR results were compared with the previous results computed on a uniformly fine mesh to demonstrate the accuracy and the efficiency of the current AMR strategy. As the computational load of the whole adaptively refined mesh has to be balanced between nodes on-line, the parallel performance of the existing code deteriorates along with the increase of processors due to the expensive inter-nodes memory communication costs. The potential solution was suggested in the end.     

过失速下俯敏捷性及纵向控制效能需求研究

结合飞行安全和作战效能需求,对过失速战斗机的大迎角/过失速迎角下俯敏捷性指标及纵向控制效能需求进行了研究.为了满足飞行品质和过失速敏捷性指标要求,采用非线性动态逆方法设计了某推力矢量飞机快回路和慢回路飞行控制律.在此基础上,根据过失速下俯敏捷性和滚转敏捷性指标要求,对所需的最小俯仰推力矢量偏角进行了计算分析,所得结果对先进战斗机的设计有一定的参考价值.     

变截面悬臂梁结构动载荷辨识方法

在航空航天领域，作用在结构上动载荷的确定对结构健康监测是非常必要和重要的。为此，本文以类似机翼结构的变截面悬臂梁结构为研究对象，提出了一种基于光纤光栅传感器与卡尔曼滤波器的动载荷识别方法。首先，根据变截面梁单元形式，推导出变截面梁的质量矩阵与刚度矩阵，建立动力学运动方程。然后，以光纤光栅传感器测得的应变信息作为观测信号，通过卡尔曼滤波器生成的增益矩阵、新息序列矩阵以及协方差矩阵，得到灵敏度矩阵和估计力的增益矩阵。在此基础上，利用广义回归模型及其最小二乘算法，估算出动载荷大小、判断出动载荷激励位置。借助数值仿真与实验手段，分别验证了该方法对于单点正弦激励、方波激励、锯齿波激励以及多点同时激励等工况下的动载荷识别效果。结果表明，本文所提算法具有较好的动载荷识别效果和噪声抑制能力，能够为未来风洞试验和真实飞行试验环境中诸如大展弦比机翼表面气动压力等载荷实时辨识、气动外形自适应控制以及结构健康监测提供技术支撑。     

Spacecraft formation-containment flying control with time-varying translational velocity

This paper investigates the problem of Spacecraft Formation-Containment Flying Control (SFCFC) when the desired translational velocity is time-varying. In SFCFC problem, there are multiple leader spacecraft and multiple follower spacecraft and SFCFC can be divided into leader spacecraft’s formation control and follower spacecraft’s containment control. First, under the condition that only a part of leader spacecraft can have access to the desired time-varying translational velocity, a velocity estimator is designed for each leader spacecraft. Secondly, based on the estimated translational velocity, a distributed formation control algorithm is designed for leader spacecraft to achieve the desired formation and move with the desired translational velocity simultaneously. Then, to ensure all follower spacecraft converge to the convex hull formed by the leader spacecraft, a distributed containment control algorithm is designed for follower spacecraft. Moreover, to reduce the dependence of the designed control algorithms on the graph information and increase system robustness, the control gains are changing adaptively and the parametric uncertainties are handled, respectively. Finally, simulation results are provided to illustrate the effectiveness of the theoretical results.     

低空风切变系统建模及其对直升机飞行安全威胁定性分析

系统地建立了含湍流的三维低空风切变模型，并综合分析了其对直升机飞行安全的威胁。建立了微下击暴流风场及大气湍流场组合的风切变模型，在不增加计算量的前提下，选取特征点发展直升机飞行动力学模型，有效捕捉了风切变的切变特性，提高了在风场中的动态响应计算精度。模型配备姿态保持功能的控制增稳系统已符合一般直升机的飞行状态，并改善机体响应。根据风速分布的特点，选取不同飞行速度、不同风场位置进行飞行仿真，定性地对比分析状态量变化与风场对应关系，并且以垂向通道为例，从动力学角度分析验证了响应的理论计算表达式。结果表明：湍流主要导致高频姿态角响应，风切变对飞行状态量变化占主导作用，且垂向风是引起威胁的主要因素，据此提出危险风场规避建议。     

Shape control of spacecraft formation using a virtual spring-damper mesh

This paper derives a distance-based formation control method to maintain the desired formation shape for spacecraft in a gravitational potential field. The method is an analogy of a vir-tual spring-damper mesh. Spacecraft are connected virtually by spring-damper pairs. Convergence analysis is performed using the energy method. Approximate expressions for the distance errors and control accelerations at steady state are derived by using algebraic graph representations and results of graph rigidity. Analytical results indicate that if the underlying graph of the mesh is rigid, the convergence to a static shape is assured, and higher formation control precision can be achieved by increasing the elastic coefficient without increasing the control accelerations. A numerical exam-ple of spacecraft formation in low Earth orbit confirms the theoretical analysis and shows that the desired formation shape can be well achieved using the presented method, whereas the orientation of the formation can be kept pointing to the center of the Earth by the gravity gradient. The method is decentralized, and uses only relative measurement information. Constructing a distributed virtual structure in space can be the general application area. The proposed method can serve as an active shape control law for the spacecraft formations using propellantless internal forces.     

电渣重熔连续定向凝固René88DT合金的组织与热变形行为

自行设计开发了适合工业化生产高纯净,低偏析,无宏观缺陷铸锭的电渣重熔连续定向凝固技术(ESR-CDS)的设备和工艺,利用该技术成功制备了直径为φ150mm的René88DT合金定向凝周铸锭.采用XRD测试了定向凝固柱状晶的生长取向,结果表明,ESR-CDS René88DT铸锭柱状晶择优生长方向为<100>系晶向;ER...     

空间可展桁架结构等效动力学模型研究进展与展望

随着航天重大工程的逐步实施，桁架式空间可展结构正朝着大型化、轻量化和多功能等方向发展，该类桁架结构具有周期性、大柔度、构型复杂等特点。为满足大型空间结构的高精度、高可靠性要求，其动力学建模、非线性振动与振动控制等问题越来越复杂且难于处理。因此，大型空间可展结构的等效连续体建模成为研究热点。本文着重介绍大型空间可展桁架结构等效动力学建模的研究现状，综述了等效动力学建模的研究对象、方法及已取得的成果，提炼出等效动力学建模和与之相应的非线性振动与振动控制研究领域中亟待深入研究的关键科学问题。