飞机穿越烟气流场的响应计算与分析

本文把烟气流作为一种人为的风切变场,分析和计算了烟气流的抬升夹卷模式,讨论了飞机对称穿越烟气流场时的响应。可为电厂和机场的相关设计提供参考依据。     

Direct integration methods in dynamic problems of structural mechanics

A method of direct integration with respect to time is proposed to solve dynamic problems of structural mechanics and comparison with the well-known methods is presented.     

机床实体模型复模态空间动位移显示技术的研究

介绍了用实体模型在复模态空间显示机床整机动位移的原理和方法。并在VC++6.0开发平台上用OpenGL语言开发了相应软件。解决了以往同类软件动画效果不能真实地表现实际机床整机的动态位移情况的难题。     

EXPERIMENT RESEARCH ON DYNAMIC LOAD IDENTIFICATION TECHNOLOGY BASED ON GENERALIZED ORTHOGONAL POLYNOMIAL THEORY (GOPT)

Dynamicloadisoneoftheimportantoriginalparametersinstructuraldynamicanalysis.Ithasobviousinfluencestodynamicsdesign,vibrationcontrols,activecontroltechnologyandsoon.Sincel97O,manyresearchitemsinthisfieldhavebeenaccomplishedintheworld-Sometheoriesandexperimentalmethodsofdynamicloadidentificationhadbeencreatedinfrequencydomain[l'2J-Howeverftherearesomedisadvantagesthattheycouldbeadaptedonlytoidenti-fythesteady-stateloadandnottoidentifythetransientload,suchasshockloadwithshortsampling.Forvarious…     

基于深度增强学习的卫星姿态控制方法

针对卫星在执行丢弃载荷或捕获目标等复杂任务时遭遇的姿态突然发生变化的问题,采用深度增强学习方法对卫星姿态进行控制,使卫星恢复稳定状态。具体来说,首先搭建飞行器的姿态动力学环境,并将连续的控制力矩输出离散化,然后采用Deep Q Network算法进行卫星自主姿态控制训练,以姿态角速度趋于稳定作为奖励获得离散行为的最优智能输出。仿真试验表明,面向空间卫星姿态控制的深度增强学习算法能够在卫星受到突发随机扰动后稳定卫星姿态,并能有效解决传统PD控制器依赖被控对象质量参数的难题。所提出的方法采用自主学习的方式对卫星姿态进行控制,具有很强的智能性和一定的普适性,在未来卫星执行复杂空间任务中的智能控制方面有着很好的应用潜力。     

大功率无电极高密度等离子体电磁推进概述

无电极高密度等离子体电磁推进技术已成为未来深空探测、载人航天和货运、太阳能电站以及航天器在轨服务与维护等空间任务中极具竞争力的核心推进技术之一。在梳理不同无电极等离子体电磁加速机制基础上,开展大功率无电极高密度等离子体电磁推进技术性能对比,给出新概念无电极场反构型电磁推进技术向未来超大功率拓展的优势和发展潜力,同步分析了该技术亟需解决的关键基础问题,旨在为中国新概念场反构型电磁推进技术的研发提供理论基础。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

仿生正弦前缘对翼面动态失速的影响

动态失速导致叶片气动载荷急剧变化，造成振动载荷激增，桨叶寿命大幅衰减。针对动态失速问题，从座头鲸胸鳍在动态倾转下取得良好的流动特性获得启示，据此模化出仿生正弦前缘翼面（包含3种波峰和2种波长），旨在实现动态失速控制。借助三维非定常数值模拟方法，采用运动网格技术，基于SC1095旋翼翼型，研究了仿生前缘动态失速流动控制机理及运动参数和来流速度的影响。结果表明：正弦前缘大幅度降低俯仰力矩系数峰值和阻力系数峰值；前缘波峰越大、波长越小，阻力系数峰值与俯仰力矩系数峰值的抑制效果越明显，虽然升力系数峰值减小，但其减小量远小于前两者，例如其中一种仿生翼使俯仰力矩系数峰值减小了47.7%，阻力系数峰值减小了36.4%，升力系数峰值减小14.1%；在最大迎角附近，正弦前缘能够缓和失速特性，使载荷变化更为平缓；在高平均迎角、低俯仰频率、低马赫数下，仿生翼动态失速控制效果更强，相比较而言迎角振幅的影响较小。     

电动式磁悬浮动量球电磁场耦合分析

本文针对电动式磁悬浮动量球(Electrodynamic suspension reaction sphere, EDSRS)的电磁场耦合进行分析，采用定子绕组的感应电动势评判耦合强度，提出了耦合强度评判指标，作为EDSRS的结构设计约束，以降低电磁场耦合的影响。首先，结合EDSRS的具体结构特点，对多定子之间的电磁场耦合问题进行分析，采用定子电磁场在另一个定子绕组中产生的感应电动势评判耦合强度。然后，对感应电动势产生规律进行分析，提出了耦合强度评判指标，并基于所提评判指标，建立了耦合约束验证流程，作为EDSRS的结构设计约束，最后，通过有限元仿真和实验验证了上述电磁场耦合分析。     

机载嵌入式可重构信号处理系统设计

为使机载嵌入式信号处理系统性能更加均衡,更好地适应机载嵌入式环境,在比较三种传统的机栽信号处理系统架构的基础上,提出了一种系统可伸缩、功能可重构的信号处理系统架构,并分析了其系统特性和关键技术。从可编程能力、处理性能、通用性以及可扩展性等方面比较了三种信号处理系统架构,结果表明:可重构信号处理系统架构具有较强的综合性能,能更好地满足机载嵌入式应用的需求。