Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

Storage life of silicone rubber sealing ring used in solid rocket motor

It is urgent to carry out detailed research on storage performance of rubber sealing ring to get the criterion for its storage life. This paper acquires material ageing regularity by theoretical analysis and experimental confirmation. On this condition, failure mode and failure criterion of typical sealing structure is studied, and the failure mechanism is found. Thus by analyzing the stress distribution, the relationship between ageing state and sealing condition is established. Rationalization proposal is put forward and storage life of sealing ring is evaluated. The research mentionedabove has special reference to the design of sealing structures and can provide reference for prolonging their service life.     

无刷直流电机控制器硬件实时性设计方法

在航空领域,无刷直流电机由于其高效率及低故障率,已逐步取代传统液压作动部件.针对无刷直流电机控制器的硬件实时性设计,介绍了控制器的整体架构、各个模块功能及简单的控制流程和方法,重点讨论了控制器的双处理器交互的实时性设计,给出了优化方法,实验数据表明,优化方法达到了预期效果.     

一种实现陀螺马达准确制动方案的研究

在分析了几种传统的电机制动方案基础上,提出了一种适合陀螺马达的能耗制动方案,该方案依据马达逐渐停转时自身产生的微弱电信号,再经放大处理后作为能耗制动的控制信号,实现陀螺马达准确、可靠、平稳的停止,避免了不及时切断电源而烧坏定子绕组的情况.     

一种民用飞机电作动舱门集中式控制方案研究

在未来飞机多/全电化和机电综合管理的发展趋势下,舱门作动器逐渐由机电作动取代了传统的液压、机械作动。针对目前民用飞机舱门分散式独立控制杂、乱、散的局面,提出一种用于电作动舱门的集中式控制方案。对该集中式控制方案下如何实现电机的伺服控制、舱门的并行控制以及接近传感器感应距离值的修改进行设计,并搭建舱门作动系统模拟装置及电...     

巨型晶闸管在大型直流电动机拖动中的应用

巨型晶闸管在国内首次成功地用于大型风洞的动力系统──大型直流电动机拖动系统中，使大型直流拖动的控制系统简化，１０００—３０００ｋＷ系统简化到一个三相全控桥式整流电路，或两个三相全控桥式整流电路并联输出的技术问题上，而且由于系统简单化，潜在的故障因素减少，可靠性增强，维护的工作量也大大减少。本文介绍风洞动力控制系统的实用调速方法，以及用计算机控制速压的方法。     

用低纯原料制备电冰箱起动器PTCR的重要途经——热敏钛酸钡陶瓷第二相结晶

根据Al_2O_3-SiO_2系统相图,调整Al_2O_3,SiO_2添加剂比例,可在热敏钛酸钡陶瓷显微结构中形成莫来石结晶相,莫来石的形成改善了用国产低纯原料制备电冰箱起动器PTCR的性能。本文就莫来石第二相与PTCR性能关系进行了讨论。     

快速阀门同步控制系统

本文阐述了自在由飞弹道靶试验中,利用微波相干原理,取得模型运动的起步信号,经过与模型运动速度相对应的延时后,去触发控制电路,引爆阀体内的电雷管,控制阀门的开启和关闭的同步控制系统。     

H2O2-PE固液火箭发动机低频不稳定燃烧研究

介绍了85％H2O2-PE固液火箭发动机的低频不稳定燃烧特征;应用发动机质量守恒方程对发动机低频耦合振荡燃烧现象进行了一维模拟,分析了氧化剂喷射压降对低频不稳定燃烧的影响。利用扰动分析确立了固液火箭发动机的稳定工作限。提出了抑制低频耦合振荡燃烧的方法。     

喷管扩散段型面对固体发动机性能的影响

通过计算喷管二维两相流和边界层比冲损失,研究了喷管扩散段型面对其性能的影响。研究结果表明：在喷管扩散段长度一定的情况下,膨胀比有一最佳值,超过该值,喷管性能反而下降;在膨胀比一定的情况下,在一定长度范围内喷管越长,其性能越高。从而得出,为使综合性能达到最佳,在一定膨胀比下喷管扩散段长度应取喷管出口直径的1～1．25倍。该结论可供设计人员参考。