螺旋桨飞机滑流非定常数值模拟研究

采用非定常数值模拟方法,基于滑移网格技术,分析研究螺旋桨滑流对全机气动特性的干扰影响。用多块结构网格数值模拟软件,从搭接边界建立、搭接网格生成、流场插值传递3个方面对螺旋桨滑移搭接网格的数值模拟方法进行全面详细的介绍,并且阐述基于该技术的非定常数值模拟方法。在此基础上,开展螺旋桨飞机模型验证计算,分析研究螺旋桨滑流对全机流场和气动性能的影响,通过与风洞实验数据的对比分析,验证滑移搭接网格技术的可行性与准确性。研究结果表明,基于滑移搭接网格技术的螺旋桨滑流数值模拟,可以真实反映螺旋桨滑流流场特性,为螺旋桨类飞机的设计评估提供一种有效的数值模拟手段,在工程方面具有重要的实用价值。     

基于边界层相似性解的放大因子输运模型

为了使二维线性稳定性理论能够适应现代CFD求解技术,通过求解Falkner-Skan边界层相似性方程获得各个形状因子下的相似速度型。基于线性稳定性理论,对各个速度型进行稳定性分析从而获得对应不同速度型的扰动放大因子包络线。最后使用标量输运方程的形式实现包络近似方法中放大因子的当地化求解,并结合原始γ-Re_θt转捩模型中的间歇因子输运方程,实现了自然转捩和分离泡转捩的建模。使用该输运模型对S&K平板、S809翼型、NLR7301翼型和DLR-F5机翼进行转捩预测,结果均与试验结果吻合较好,验证了该模型构建的合理性和可行性。     

低马赫数下多凹腔燃烧室非稳态燃烧过程

作为稳定火焰的有效手段之一,凹腔构型在冲压发动机燃烧室研究中占有重要地位。在对以煤油为燃料的多凹腔燃烧室冷/热态流动特性分析的基础上,重点研究低进口马赫数条件下燃烧室点火起动初期非稳态过程。结果表明：上游凹腔内大涡结构有助于提高燃料的驻留时间,未燃混气被高速主流带入下游凹腔内继续反应,进一步提高燃烧效率;燃油喷射速度决定被卷吸进回流区的燃油质量分数的大小,进而影响燃烧效率高低;燃烧室点火起动初期出现了主流熄火、火焰逆流传播以及主流再着火等复杂现象,火焰逆流传播现象是在上游凹腔内燃料自燃与下游燃烧释热压缩来流两种机制共同作用下完成的。     

动力对全机水滴收集率的影响计算

针对飞机在飞行中遭遇过冷水滴撞击并结冰现象,建立了适合于发动机带动力情况下结冰过程水滴收集率计算的三维数值方法和计算程序.其基本思路为:采用多块技术与SIMPLE方法计算空气流场,以流场分布的计算结果为基础,求解水滴相的控制方程,进而获得物体表面的水滴收集率.空气相控制方程和水滴相控制方程均写成典型输运方程的形式,采用一致的有限体积法离散求解,方便了计算程序的编制.对某型运输机巡航构型有/无动力条件的水滴收集率进行了比较计算,获得了不同直径水滴在飞机表面的撞击特征以及水滴收集率在飞机机翼、平尾、垂尾和发动机进气道唇口上的分布规律.研究表明:(1)发动机是否带动力对机翼、平尾、垂尾的水滴收集率基本无影响;(2)飞机带动力主要影响发动机进气道唇口处的水滴收集率,带动力后唇口的收集率比无动力情况高,水滴撞击范围增大,在进行防除冰研究和设计时需引起重视.     

高空飞艇螺旋桨优化设计与气动性能车载试验

结合某高空飞艇螺旋桨的总体设计方案要求,完成螺旋桨的优化设计以及气动性能车载试验.采用叶素动量理论作为螺旋桨气动性能的计算方法,并通过风洞试验验证了该方法的可靠性.结合遗传算法对螺旋桨的弦长和扭转角进行了优化,使螺旋桨更加高效轻质,优化后螺旋桨设计点的气动效率增加了2.3%.建立螺旋桨车载试验测控系统,可以改变试验海拔高度和大气参数,得到优化设计螺旋桨不同工况的气动性能.试验结果表明,相同转速和来流条件下,海拔越高,螺旋桨的推力和扭矩越小.海拔为3-6km时,全尺寸高空飞艇螺旋桨计算推力和扭矩与试验结果的平均相对误差分别为2.8%和9.2%,两者基本吻合,从而验证了高空飞艇螺旋桨车载试验的准确性.      

基于相似理论的月球车月面牵引性能预测

引入相似理论对月球车的轮土交互系统进行研究,建立了月壤-车轮交互系统的地面力学相似模型,针对原位月壤内聚力较小的特点,提出了一种无需改变车轮尺寸、以模拟月壤为土壤介质的模型试验方法,对月面重力环境下月球车轮的牵引性能进行预测.利用室内土槽试验和颗粒流仿真相结合的方法对该模型试验方法的有效性进行验证,验证结果与模型试验的理论分析结果较为接近,表明该法具有较好的可行性和有效性,可考虑用于预测月球车的月面牵引性能.     

Optimization of communication network topology for navigation sharing among distributed satellites

Navigation sharing among distributed satellites is quite important for coordinated motion and collision avoidance. This paper proposes optimization methods of the communication network topology to achieve navigation sharing. The whole communication network constructing by inter-satellite links are considered as a topology graph. The aim of this paper is to find the communication network topology with minimum communication connections’ number (MCCN) in different conditions. It has found that the communication capacity and the number of channels are two key parameters affecting the results. The model of MCCN topology for navigation sharing is established and corresponding method is designed. Two main scenarios, viz., homogeneous case and heterogeneous case, are considered. For the homogeneous case where each member has the same communication capacity, it designs a construction method (Algorithm 1) to find the MCCN topology. For the heterogeneous case, it introduces a modified genetic algorithm (Algorithm 2) to find the MCCN topology. When considering the fact that the number of channels is limited, the Algorithm 2 is further modified by adding a penalized term in the fitness function. The effectiveness of these algorithms is all proved in theoretical. Three examples are further tested to illustrate the methods developed in this paper.     

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.     

基于欧拉法模拟旋转帽罩水滴撞击特性

基于欧拉两相流理论,对旋转帽罩水滴撞击特性进行了数值模拟。通过引入耗散函数求解水滴相无黏欧拉方程,实现了欧拉法求解三维旋转帽罩的水滴撞击特性。分析了旋转帽罩转速对水滴撞击特性的影响。发现旋转帽罩转速越大,其表面水滴撞击极限稍有减小。在典型飞行条件与气象条件下,离心力对水滴运动轨迹的影响远小于惯性力对其的影响,旋转帽罩转速对水滴撞击特性影响较小。     

融合粗糙集与D-S证据理论的航空装备故障诊断

针对航空电子装备故障诊断中出现的多源诊断信息存在冲突的情况,基于粗糙集与证据理论在处理不确定问题时的优势,提出了一种融合粗糙集与证据理论的故障诊断方法.该方法利用粗糙集将信息源给出的诊断数据转化为证据理论中的mass函数,进行结果融合.同时,该方法给出边界粗糙熵的定义,并基于边界粗糙熵获得反映各信息源在诊断融合过程中重要度的动态权重参数,提出一种新的证据理论的冲突合成规则.仿真实验表明,该方法可以有效地提升诊断信息融合结果的准确性,在航空电子装备故障诊断方面有较好的实用价值.