激光测距传感器光束矢向和零点位置标定方法

激光测距传感器常用于飞机壁板法向检测。为了解决激光测距传感器加工和安装误差导致的法向检测精度下降问题,提出和实施了一种利用几何数学模型和最小二乘法进行激光测距传感器光束矢向和零点位置标定的方法。首先,利用角度标定理论获取激光束与主轴进给方向的夹角。然后,借助激光跟踪仪建立坐标系,根据激光测距传感器射在与电主轴进给方向成不同夹角的平面上的测量值,利用几何数学模型计算出各激光点之间的相对坐标,运用最小二乘法拟合出激光束的空间方程,进而得到光束矢向和零点位置。最后,在航空制孔机器人平台上进行标定实验,并且根据标定结果进行了实验验证。实验结果证明:该方法能够较为准确地标定出激光测距传感器的光束矢向和零点位置,可使法向检测精度在0.18°内。      

软土地区水平定向钻施工对周围环境的影响

通过水平定向钻在市政工程中的广泛应用,水平定向钻施工越来越显示出它的优势,其施工对周围环境的影响需要评估。为此,对水平定向钻小直径管道施工过程引起的力学效应进行了讨论,重点探讨了拉力、扭矩和泥浆的影响,同时通过分析沉降位移监测值,就具体施工过程所带来的影响进行了讨论,得出了有益的结论。     

Electrochemical drilling of small holes by regulating in real-time the electrolyte flowrate in multiple channels

Electrochemical drilling(ECD) provides an alternative technique for drilling multiple small holes in difficult-to-machine materials in numerous industrial applications such as for aeroengines. The value and fluctuation of electrolyte flowrate can seriously affect the machining stability and hole quality in ECD. In particular, when drilling multiple holes, the distribution and fluctuations of the electrolyte flowrate in each channel could influence the uniformity of the electrolyte flowrate among...     

Analysis of Chang’e-5 lunar core drilling process

Chang’e-5 explorer successfully acquired lunar regolith core samples from depths of greater than 1 m of lunar surface. This study analyzed the lunar core drilling process based on the telemetry data, image information, and returned samples to optimize the sampling device design and enhance the understanding of the lunar regolith. In particular, a prediction method for the projected drilling path and local terrain fitting of drilling dip angle was proposed based on the flight events recorded during the core drilling process and the image information acquired before, during, and after sampling. The results revealed that the drilling dip angle of Chang’e-5 was approximately 2.3°, and the deviation of the drilling length and depth was less than 2 mm. For continuous drilling, a fusion method based on telemetry data and image information was applied to determine the demarcation point of drilling with and without the lunar soil. The position of the demarcation point implied that the drilling point remained at approximately 6 mm loose soil, thereby lagging the action of the force response. Additionally, a characteristic parameter comparison method was proposed for the lunar and ground drilling to analyze the status of the lunar soil. Furthermore, the analysis results revealed that the majority of the Chang’e-5 drilling samples were derived from 0–73.8 cm below the lunar surface and few samples were extracted below 73.8 cm, as the drilling encountered several rocky regions. Moreover, the drilling point exhibited two prominent stratification variations at ～28.7 cm and ～70 cm below the lunar surface. Ultimately, the preliminary relationship between sample dissected position in soft tube and drilling displacement was analyzed. The segmented estimation results can support research on subsurface lunar soil.     

CFRP钻削温度场的数值仿真与分析

为研究碳纤维增强树脂基复合材料(CFRP)钻削过程传热规律及温度分布特性,在对材料热物理特性均匀化处理的基础上,利用COMSOL Multiphysics建立单向CFRP钻削温度场数值仿真模型,探究钻削过程中热量传递及温度场分布规律.结果表明,出口处温度场呈椭圆形分布状态,椭圆形最小值离心率e为0.771,且椭圆的长轴...     

激光加工非金属复合材料的研究与应用进展

非金属复合材料是一种低密度、高强度、高模量的高性能材料，目前已经成为航天卫星上不可或缺的关键结构材料。但与此同时，该类材料也是一种极难加工的各向异性非均质材料，采用传统的接触式方法加工易产生崩边、分层、起毛、撕裂等问题。激光制造技术作为一种开始逐步走向实用化的先进制造技术，具有材料去除能力强、加工精度高、损伤可控等一系列优点，是一种实现非金属复合材料高性能加工、满足现有和未来需求的理想方法。本文围绕航空航天领域应用较为广泛的碳纤维复合材料、芳纶纤维复合材料和陶瓷基复合材料，系统地综述了国内外激光加工非金属复合材料的研究与应用进展。其中技术分支涉及切割、制孔、铣削刻蚀、清洗等实体减材制造技术。最后对非金属复合材料激光加工方法的未来研究重点和工程应用前景进行了总结与展望。     

Breakthrough detection in electrochemical discharge drilling to enhance machining stability

Film cooling holes are widely used in aero-engine turbine blades. These blades feature large numbers of holes with complex angles and require a high level of surface integrity. Electrochemical discharge drilling(ECDD) combines the high efficiency of electrical discharge drilling(EDD) with high quality of electrochemical drilling(ECD). However, due to the existence of a variety of energy for material removal, accurate and timely detection of breakthroughs is fraught with difficulties. An insuffic...     

Influence of lunar regolith compressibility on sampling performance of thick wall spiral drills

A 2 m class robotic drill was sent to the Moon and successfully collected and returned regolith samples in late 2020 by China. It was a typical thick wall spiral drill (TWSD) with a hollow auger containing a complex coring system to retain subsurface regolith samples. Before the robotic drill was launched, a series of laboratory tests were carried out to investigate and predict the possible drilling loads it may encounter in the lunar environment. This work presents how the sampling performance of the TWSD is affected by the regolith compressibility. Experiments and analysis during the drilling and sampling process in a simulated lunar regolith environment were conducted. The compressibility of a typical lunar regolith simulant (LRS) was measured through uni-directional compression tests to study the relationship between its inner regolith stress and bulk density. A theoretical model was established to elucidate the cutting discharge behavior by auger flights based on the aforementioned relationship. Experiments were conducted with the LRS, and the results show that the sampling performance is greatly affected by the flux of the drilled cuttings into the spiral flight channels. This work helped in scheduling reasonable drilling parameters to promote the sampling performance of the robotic drill in the Chinese Chang'E 5 mission.     

碳纤维复合材料钻削温度测试与分析

利用热像仪对碳／环氧复合材料高速钻孔时的钻削温度及温度场分布进行了系统的试验研究。实验结果显示,钻削热主要是由刀具后刀面与已加工表面之间的摩擦产生的。转速越高,钻削温度赵高;进给量越大,钻削温度越低,但钻削温度一般不超过环氧树脂的玻璃化转变温度。     

拉伸载荷下正交三向机织复合材料接头失效多尺度渐进损伤分析

针对机械打孔三维机织复合材料耳片接头的单轴拉伸破坏性能，采用多尺度分析方法研究孔边纱线破坏过程。结果表明，正交三向（ORT）机织复合材料接头孔边的连续的经纱出现大量的纵向损伤；纬纱单元出现大量横向损伤，损伤沿着孔边45°方向逐渐扩展，纬纱发生剪切失效，最终接头的损伤形式为剪切破坏。数值模拟和试验结果的误差为1.14％，验证了多尺度有限元仿真方法的正确性。孔边细观区域的纱线损伤从孔边扩展到边接头边缘。孔边纱线的分布位置不同，纱线的破坏形式虽不一样，但是不影响破坏的扩展趋势。