空间用9Cr18 钢PIII 复合离子注入表面改性工艺研究

采用等离子体浸没离子注人(PⅢ)技术对9Cr18轴承钢表面进行了双注入及共注入Ti+N工艺处理.测试了处理前后试样的显微硬度及真空摩擦因数,并表征分析了表面磨损形貌.结果表明:处理后试样的显微硬度都有大幅提高,最大增幅达68.7％；表面真空摩擦因数由0.15下降到0.08；磨斑尺寸及粗糙度分别减少了54.4％和37.4％.双注入与共注入方式在相同参数下,双注入处理后的试样表面综合性能更加优异.     

轴承钢等离子体基离子注碳复合改性层化学结构的研究

通过激光Ｒａｍａｎ光谱、Ｘ射线光电子谱以及电阻和显微硬度的测试，研究了ＧＣｒ１５钢及镀钛ＧＣｒ１５钢试样经乙等离子基离子注入所得表面改性层的化学结构。     

Development and coupling test of active spacecraft potential control – Next generation (ASPOC-NG)

The active spacecraft potential control (ASPOC) system developed in the 1990s emits positive ions to neutralise the spacecraft potential, such as used in several missions like Geotail, Equator-S, Cluster, Doublestar and MMS. With the experience gained, the next generation of the active spacecraft potential control (ASPOC-NG) instrument has been developed over the last three years. Thereby, three emission technologies were tested including Liquid Metal Ion Source (LMIS), Liquid Metal Electron Source (LMES) and Solid Metal Electron Source (SMES). The development of the emitter module by FOTEC and the corresponding electronics control unit by IWF is presented. Optimisations were carried out with the focus on the reduction of mass and power consumption to comply with the requirements of future scientific missions. Coupling tests of the modules and the electronics control unit were performed including range, accuracy and lifetime tests. Both ASPOC-NG instruments for positive and negative charge compensation and their performance values show excellent results.     

基于离子污染度数据分析的航空电子产品水清洗质量提升技术

本文应用ROSE/SEC法测试航空电子产品印制板组件(PCBA)的离子污染度,以测试结果反映水清洗效果,通过工序能力指数Cpk对工艺参数进行评价,同时运用统计过程控制(SPC)对清洗工序进行监控,实现对航空电子产品水清洗工艺清洗质量的提升.试验结果表明,降低PCBA相互遮挡面积可有效降低离子污染度.结合Xbar-S控制...