微阴极电弧推力器羽流探针诊断研究

微阴极电弧推力器（micro-cathode arc thruster,μCAT）具备功率低和结构简单的特点,能够满足微纳卫星的任务需求,具有良好的发展前景。μCAT羽流的诊断可以揭示推力器的加速机理,对提高其性能具有重要意义。利用朗缪尔三探针对μCAT羽流进行诊断,得到了μCAT羽流不同位置的电子温度、电子密度和离子速度等羽流特性,研究了外加磁场、充电时间和阴极材料对羽流特性的影响。研究结果表明,μCAT放电初期产生的等离子体电子温度较高,密度较大;随着等离子体向下游运动,电子温度和电子密度降低,离子速度增大;外加磁场的磁感应强度越强,电子温度和离子速度越高,电子密度有所降低;磁场位置适当向推力器下游平移,能够有效提高推力器中轴线的电子密度;μCAT充电时间越长,电子温度、电子密度和离子速度越大;相比于CuW和AgW阴极,Ti阴极羽流的电子温度更高,电子密度更低。     

面向深空探测的30cm离子推力器寿命预估

为评价30cm离子推力器的寿命,提出了有限寿命考核结合栅极仿真模型的推力器寿命预估方法,利用粒子-蒙特卡洛（PIC-MCC）方法建立了栅孔溅射腐蚀模型,开展了30cm离子推力器寿命预估研究,分析了栅孔刻蚀速率、单孔电场及离子引出特性,给出了30cm推力器寿命预估值。结果表明,栅孔直径仿真与实测值一致性较好,误差在20%以内,基于每个寿命小节栅孔实测值对模型的修正是有效的;根据仿真结果,10000h寿命考核后,减速栅最先失效,30cm离子推力器在最大功率（3kW）工况下预估寿命为37540h,能够满足小天体探测任务对电推进系统的长寿命需求。     

氙离子推力器束流分布特性研究

建立了离子推力器束流分布的高斯模型,以200mm氙离子推力器为例,在不同工作环境下对推力器束流分布进行了数值模拟,并通过试验测量了推力器引出切面不同位置(轴向z=50mm,z=100mm)下的径向束电流密度和束离子密度分布。通过对数值模拟结果与试验测量结果的比较,误差为17%,认为数值模拟结果与试验测量结果吻合较好。表明离子推力器引出束流呈轴对称分布,在推力器出口附近,束离子密度很大,越往下游,密度越小且束流出现发散。     

超低轨道卫星应用离子电推进技术方案

低地球轨道大气环境对诸如科学探测和对地观测卫星的阻尼作用十分明显,而且阻尼随太阳和地磁活动以及昼夜、季节交替变化范围宽.为了保证卫星轨道精度或飞行状态满足任务要求,需要利用推进系统对卫星受到的阻尼进行实时或间歇式补偿以实现轨道或飞行状态的保持.针对轨道高度220～268 km的无拖曳飞行和轨道维持应用,基于卫星轨道阻尼...     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

Electrolytic Passivation of Nitinol Shape Memory Alloy in Different Electrolytes

The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl–ion concentrations. The results demonstrate that the Cl–ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples pas-sivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those pas-sivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti:Ni=9.01:1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.     

无刷直流起动/发电系统的起动控制

介绍了用于某型飞机的无刷直流机载起动/发电系统。该系统的起动/发电机采用电励磁双凸极电机,文中通过改进电机结构降低了起动时的转矩脉动,在理论分析的基础上提出了基于转速变化的阶段性角度控制:低速采用标准位置查询起动,中高速采用随转速变化自动改变提前角的角度控制方式,使起动机工作在最佳状态。最后,完成了18 kW无刷起动/发电系统的样机制作及航空发动机的冷开车试验。试验表明:该系统的起动控制策略正确有效,起动转矩平滑,所需电源容量小,效率高,具有良好的起动性能。     

新型双凸极发电机数字控制原理与实现

电励磁双凸极电机是一种新型交流无刷电机,它具有结构简单、可靠性高、维修方便等优点,用作发电机具有调压控制简单、可故障灭磁等优点。文中首先介绍了电励磁双凸极发电机系统的控制原理,并分析了发电系统的控制规律。为优化控制P I参数,提高系统的动稳态性能,通过M atlab仿真获得根据输出电压与给定电压的偏差的变P I参数组合,并经试验优化该P I参数组合。然后,通过硬件构成与软件设计两方面介绍了基于DSP控制的电励磁双凸极发电机系统的设计方法。最后,以一台30 kW发电机为例,设计了一套数字调压器,并进行了系统试验。实验结果表明,电励磁双凸极发电系统采用变P I参数的控制方法具有良好的动稳态特性。     

钛合金的离子束改性

钛合金是航空航天工业常用的结构材料,它具有重量轻、强度高、抗腐蚀强等优良性能,但耐磨性较差.为提高其耐磨性,对TC4、TA7航材试件,采用溅射方法在其表面镀上钛膜,并用(N^＋＋N^＋₂)混合离子束进行动态反冲注入及单元素C^＋离子束注入两种方法,进行表面改性.精密摩擦、磨损试验及显微硬度测量结果,试件表面的滑动摩擦系数降低了64%~77%;磨损率减少了22%~48%;显微硬度提高0.3~1.4倍.证明离子注入有效地改善了合金表层的摩擦、磨损性能.对注入样品进行X射线光电子能谱(XPS)分析,发现注入后的钛合金表层,生成了大量的TiO₂,并析出TiN,TiC等金属化合物,这是降低摩擦系数,提高耐磨性的主要因素.添加C^＋离子注入的试件,其力学性能并无进一步改善,原因有待分析.     

SiO32-浓度对KMnO4/FeSO4工艺除磷过程的影响

考察了天然水体中常见的SiO_3~(2-)对KMnO_4/FeSO_4工艺混凝除磷的影响。SiO_3~(2-)存在时KMnO_4/FeSO_4工艺混凝除磷的效能随着溶液pH的升高呈现先增加后降低的趋势。SiO_3~(2-)浓度为1.0 mmol/L,溶液pH值为4～6时,SiO_3~(2-)可促进KMnO_4/FeSO_4工艺除磷的效能,KMnO_4/FeSO_4工艺对磷的去除效果分别增加了6.0%,9.9%和6.3%;溶液pH值为7～9时,SiO_3~(2-)可显著抑制KMnO_4/FeSO_4工艺除磷的效能,KMnO_4/FeSO_4工艺对磷的去除效果分别降低了14.76%,32.6%和17.3%。KMnO_4/FeSO_4工艺形成的絮体颗粒物表面ζ电位显著降低,溶液中残余铁的量明显提高。另外,水中SiO_3~(2-)对KMnO_4/FeSO_4工艺形成的絮体颗粒物的组成和表面特征均有一定影响。该研究为KMnO_4/FeSO_4工艺混凝除磷技术的推广提供了必要的理论基础。