激波过弯道绕双圆柱流场

采用单曝光光栅干涉或双曝光光栅干涉，研究激波过弯道绕双圆柱传播的微波流场。采用单曝光法，成功显示入射激波到第一圆柱上的反射、绕射，到达第二圆柱上的反射、绕射。在同一底片上采用双次曝光，第一次脉冲记录直道上的平面波，第二次脉冲记录激渡过弯道绕双圆柱流场。这些照片对于研究反射、绕射及它们边界的相互作用是很有用的。     

双三角翼外翼前缘钝化对涡流特性的影响

通过风洞试验，利用７孔探头对７５°／４５°和７５°／６０°两种典型双三角翼进行了空间流场测量，研究了双三角翼前缘形状对大迎角涡流特性的影响．试验结果表明，双三角翼外翼前缘钝化使双涡态的双三角翼内、外翼涡互相靠拢、增加干扰，当出现合并涡态时，使合并涡涡核向内下方偏移；外翼前缘钝化使外翼涡或合并涡的Ｃｐ０、Ｖｘ较尖前缘时为高，最终使外翼涡或合并涡推迟破裂．     

永磁电动机网格自动剖分

有限元法是一种可以用来求复杂工程问题近似解的数值方法,而求解域的网格自动剖分技术有明显的实用价值。本文根据网格自动剖分的一般原则,阐述了稀土永磁直流电动机矩形槽三角形单元的自动剖分方法及相应的几个功能子程序,并利用Auto CAD绘图软件包方便的实现了网格数据检查和图形显示。     

直流电机网络控制系统仿真

对直流电机网络闭环控制系统进行仿真分析,根据电机网络闭环控制系统原理建立仿真模型。对具有数据丢包的直流电机网络伺服控制系统输出响应特性进行仿真,比较系统分别采用PI控制及增益,可调PI控制方式时的输出特性。结果表明,相比常规PI控制增益可调PI控制方法在网络环境下具有更好的控制特性。该研究为网络伺服控制技术提供可靠的参考依据。     

DME脉冲调制信号波形参数对空间频谱占用的影响分析

航空测距器DME的开发、调试和性能验证都要用到高斯双脉冲调制格式的DME信号。由于专用的DME信号模拟器技术复杂、价格昂贵,人们常用具有快沿双脉冲调制功能的模拟信号源替代。本文以航空测距器DME信号要求为依据,初步分析了这种替代可能存在的问题,并通过实验对不同边沿条件下高斯双脉冲、矩形双脉冲调制信号的功率频谱占用情况进行了验证。     

基于TC783A的三相电动机缺相保护电路的设计与实现

介绍用于三相电动机缺相保护装置的设计方法,采用集成芯片TC783A为核心元件实现,有效地解决三相电动机其他保护元件的局限性。具有快速切断控制回路电源的功能及缺相指示和相序指示,试验证明系统工作性能良好。     

基于电力综合集成的多绕组双流发电机技术分析

为解决采用传统发电机的移动电站输出电源种类单一,而采用多台发电机又会造成底盘过载影响机动性的问题,文章基于电力综合集成技术,分析研究实现发电机的双流发电的关键技术,突破发电机多绕组发电及励磁解耦等难题,减小了电机体积、降低了电机重量,有利于移动电站的多功能化与小型化设计。     

双框架飞机蒙皮检测机器人切换运动控制方法

针对一种双框架飞机蒙皮检测机器人,通过分析该机器人在飞机表面上的受力情况,在飞机表面该机器人受到了非完整约束,基于牛顿-欧拉法建立了机器人非完整约束动力学模型。根据机器人机械结构和运动步态分析,将该非完整机器人系统分为子系统A和子系统B。为了实现机器人在飞机表面运动,采用反演技术和快速Terminal滑模控制相结合的思想对系统设计了控制器,提出了一种反演-滑模控制方法;对于非完整机器人子系统A和子系统B,设计了一种基于事件驱动的切换策略,实现了机器人对期望轨迹的全局渐近跟踪,并利用Lyapunov稳定性证明系统的跟踪误差收敛。仿真和试验表明,采用该切换策略和反演-滑模控制方法,双框架飞机蒙皮检测机器人可以在飞机表面自由运动并进行损伤检测,具有良好的可靠性和稳定性。     

The role of motor processes in mental rotation: selective shaping of cognitive processing via specific sensorimotor experience

The involvement of motor processes in mental rotation is experience-dependent: different levels of expertise in sensorimotor interactions lead to different strategies in mental rotation. In the present study, wrestlers, gymnasts, and nonathletes physically rotated objects that were either light (wooden) or heavy (lead) but otherwise having the same sizes and shapes. They then performed a mental rotation task using photographs of these objects in which the material and therefore the weight was visible. I hypothesized that wrestlers would rely more heavily on experience-based sensorimotor strategies in performing mental rotation because during their athletic practice they not only manipulate external “objects” (i.e., their opponent) but also have to plan future actions taking into account past experience of these “objects” (for example their weight). All participants reported that lead objects were harder to physically rotate than wooden ones. However, only wrestlers mentally rotated lead objects more slowly than wooden ones—as they would if they were physically rotating them—suggesting the involvement of motor processes. These findings show that the involvement of motor processes in mental rotation depends on specific rather than mere sensorimotor experience.     

Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.