国土卫星图象的校正方法

自国土普查卫星发射成功以来,针对国土星成象的几何特性,先后研制了一系列针对不同成象条件和地表状况的几何校正方法。文章的目的,就是对这些方法,从客观的角度,进行评述。找出存在的问题,并指出解决这些问题的方法。     

进气畸变模拟网的设计与试验验证

介绍在涡喷发动机地面试车台上利用金属丝网模拟进气道畸变流场的技术基础、设计方法及三个实例的验证试验结果,表明应用本设计方法制作的三种畸变模拟网均达到了较高的模拟精度,可以满足进气道／发动机相容性评定的工程使用要求。     

电容均压三相四开关变换器预测功率控制

三相四开关变换器直流侧分离电容电压不平衡,将降低其并网电能质量,缩短电解电容寿命。针对该问题,提出了一种直流侧分离电容电压均衡的模型预测功率控制策略。基于αβ两相静止坐标系分析电压矢量,建立功率预测模型。由于直流侧电容中点电压偏差值含有交流分量和直流分量,使用低通滤波器提取直流分量后计算功率补偿值,并计入给定功率,进行模型预测功率控制,实现直流侧分离电容电压均衡。该控制策略无需锁相环和PWM调制,易于实现。通过仿真和试验对其动、静态特性进行分析,验证了所提出控制策略的有效性和可行性。     

Impact of bending dies with different friction forms on forming force and quality of tubes manufactured by free bending technology

In the 3D free bending forming system, the bending die can be designed either in a sliding type or rolling friction type. Bending die-based sliding friction type is often called normal bending dies; however, the bending dies-based rolling friction type includes bending die-based roller type and ball type in structure. In the current study, the impact of three bending dies on the forming force, and the bent tube quality was investigated. The obtained results showed that the tangential stresses and strains of the tubes formed by the bending die-based roller type were the smallest among the three bending dies. Besides, the spherical bearing force P_U was reduced drastically after using the roller type and ball type compared to the sliding friction type. Moreover, the uniformity of the wall thickness distribution of the tubes formed by the roller type and ball type was better than those obtained from the sliding friction type. In addition, the cross-section distortion rate was reduced by 2.8% using the roller type, and 1.8% using ball-type compared to the sliding friction type.     

基于分布式信源编码和感兴趣区域编码的干涉多光谱图像压缩

基于干涉多光谱图像特点和应用环境要求,提出一种基于分布式信源编码和感兴趣区域编码的干涉多光谱图像压缩算法。编码端通过关键帧预测出边信息帧,然后联合估计的边信息帧和插值分布的概率模型在编码端进行比特平面码率估计,最后采用基于率失真提升的感兴趣区域编码,调整图像不同区域的率失真斜率来进行更合理的码率分配。实验结果表明,该算法比传统算法更好地保护了多光谱图像的光谱信息。在不同压缩比的情况下,这种编码方式在干涉多光谱图像压缩系统中可获得较好的效果,算法复杂度低。     

鸭式布局地效翼数值研究

针对地效飞行器气动特性和纵向静稳定性这两个重要问题,应用数值模拟的方法对鸭式布局地效飞行器进行了研究。在鸭式布局中,主翼和鸭翼互相干扰,流场比较复杂。简化了地效飞行器模型,只考虑了主翼和鸭翼,通过改变鸭式布局地效飞行器中鸭翼相对主翼的位置和角度,分析其对气动特性和纵向静稳定性的影响。     

双臂自适应夹具加工变形控制方法

在叶片加工过程中,由于叶片的薄壁和曲率多变特点,易受装夹、切削力和残余应力的影响而产生弯曲、扭转变形。针对该问题,本文提出了一种双臂自适应夹具加工变形控制方法,将加工过程中产生的变形逐层消除。首先,对叶片的变形成因进行分析;然后,通过对无应力装夹和加工应力释放原理进行研究,设计了一种可提供6个自由度的自适应装夹机构,并对该机构进行了工程设计和机构分析;最后,基于这种6自由度双臂自适应装夹机构,形成了本文提出的加工变形控制工艺,不需多次修复基准和更换机床,就可以逐层消除新产生的变形。实验结果表明,采用双臂夹具自适应加工变形控制方法,可以有效控制叶片加工过程中产生的变形,使叶片的轮廓误差降为原来的50%,提高了其加工精度。     

Passive inter-modulation scattering analysis of reflector considering contact nonlinearity

 Passive inter-modulation (PIM) is a form of nonlinear distortion caused by the inherent nonlinearities of the passive devices and components in RF/microwave system. It will degenerate the performance of communication system with broad-band channel and high-sensitivity receiver. Therefore, it is necessary to construct a model to simulate this process in order to predict the level of PIM. This paper is aimed at constructing some plate models with one-dimensional and two-dimensional contact nonlinearity sections illuminated by two-tone waves, and calculating the scattered field at a fixed-point in space using time-domain physical optics method. By taking fast Fourier transform (FFT), we get the spectrum of the scattered field and then analyze the generated PIM products. At the end of this paper, some numerical examples are presented to show the influence rules of the relative factors on PIM. The results indicate the variation of the level of PIM with the number of the nonlinear regions, the nonlinear spacing, and the incident power levels.     

周向总压畸变条件下多级轴流压气机失速首发级预测分析

基于多级轴流压气机的逐级特性,发展了1种预测周向总压畸变条件下多级轴流压气机失速首发级的方法。该方法结合平行压气机模型和级叠加计算方法,以进气畸变条件下多级轴流压气机某级的有效相对气流角达到稳定状态时该级的最大相对气流角为条件,进行多级轴流压气机失速首发级的预测分析。通过对J85—13发动机8级轴流压气机总压畸变试验数据进行模拟计算,预测出该轴流压气机畸变条件下的失速首发级。