一种固体发动机光线投射体绘制加速方法

固体发动机ICT断层图像构成的体数据场规模大、空体素比例小,现有的光线投射加速方法效果不明显,并且在其三维可视化故障诊断中,不是体数据场中的所有信息都对内部故障检测有意义,三维重建出所有体数据大大增加了计算量.为此,提出一种在同体发动机体数据分割基础上的光线投射加速方法.该方法利用分割结果,建立分割信息体数据场,结合现...     

一类Cohen-Grossberg型BAM脉冲神经网络周期解的存在性和全局指数稳定性

利用Lyapunov泛函、不等式方法及Poincaré映射,建立了一类具有混合时滞的Cohen-Grossberg型BAM脉冲神经网络周期解的存在性和全局指数稳定性的充分性判据。     

甚低频拖曳天线的稳态构型计算

拖曳天线力学特征和控制是飞机对潜通信系统进一步深入论证需要解决的关键问题之一,而对其稳态动力学研究是进行拖曳天线力学特征和控制的基础。文章通过对其运动状态及其受力进行分析,建立机载甚低频拖曳天线稳态动力学模型。运用打靶法进行求解,计算出了在不同空气阻尼情况下天线稳定构型,分析了绳索的张力分布情况并比较了空气阻尼对天线稳...     

一种民用飞机结构维修大纲的制定方法

飞机在运营之前必须制定出维修大纲。根据新研民用飞机缺少使用数据和使用经验的情况,依据类似机型结构维修大纲的制定经验,同时结合维修指导小组思想,提出案例推理的方法,制定新研机型的结构维修大纲。以案例推理为基础构建了结构维修大纲制定的方法。运用基于案例推理的方法制定出了结构维修大纲,得到结构的维修任务和维修间隔,推理结论与...     

Progress of super-pressure balloon development: A new “tawara” concept with improved stability

The super-pressure balloon (SPB) has been expected to be a flight vehicle that can provide a long flight duration to science. Since 1997, we have developed the SPB. Now we are at the phase of developing an SPB of a practical size. In 2009, we carried out a test flight of a pumpkin-shaped SPB with a 60,000 m³ volume. The undesirable result of this flight aroused us to resolve the deployment instability of the pumpkin-shaped SPB, which has been known as one of the most challenging issues confronting SPB development. To explore this deployment issue, in 2010, we carried out a series of ground tests. From results of these tests, we found that an SPB design modified from pumpkin, named “tawara”, can be a good candidate to greatly improve the deployment stability of the lobed SPB.     

大型贮箱结构及工艺性研究

通过分析贮箱的类型及特点,研究贮箱放置布局,并以土星V为例研究分析了大型贮箱结构特点和制造的工艺性,提出了大型贮箱结构方案和制造工艺的发展方向。     

用于加筋结构的半连续有限元模型

针对飞机损伤结构安全性评定的要求,为减小加筋壁板有限元分析的计算规模,本文提出了一种二维有限元筋条模型———半连续模型。该模型可用来分析三维的飞机加筋壁板结构,分析精度及可信度显著地优于二维平条模型,与三维及准三维模型相当,而分析工作量及复杂性小于后两种模型。半连续模型还可推广用于其他薄壁结构,只要构成结构的各板元之间是正交连接而非斜交连接的。     

A serendipitous survey for galaxy clusters by the XMM-Newton Survey Science Center

We describe the initial results of a programme to detect and identify extended X-ray sources found serendipitously in XMM-Newton observations. We have analyzed 186 EPIC-PN images at high galactic latitude with a limiting flux of 1 × 10⁻¹⁴ erg cm⁻² s⁻¹ and found 62 cluster candidates. Thanks to the enhanced sensitivity of the XMM-Newton telescopes, the new clusters found in this pilot study are on the average fainter, more compact, and more distant than those found in previous X-ray surveys. At our survey limit the surface density of clusters is about 5 deg⁻². We also present the first results of an optical follow-up programme aiming at the redshift measurement of a large sample of clusters. The results of this pilot study give a first glimpse on the potential of serendipitous cluster science with XMM-Newton based on real data. The largest, yet to be fulfilled promise is the identification of a large number of high-redshift clusters for cosmological studies up to z = 1 or 1.5.     

根据"大震不倒"要求反演优化设计工程结构

工程结构系统在地震作用下的设计要求是“小震不坏,大震不倒”,现行的概念设计加抗震验算设计方法给出的只能是一个可用解,而不是满足“大震不倒”要求的最优解。本文结合钢筋混凝土框架结构,讨论了根据工程结构“大震不倒”的要求反演优化设计工程结构的有关参数(如钢筋混凝土框架的配筋率、混凝土标号、截面尺寸等)的概念、方法并给出了算例,说明这种不同于传统结构设计的新的设计理念是可行的,有关方法是有效的。     

酚醛蜂窝夹层结构雷达罩的外场修理

简述了酚醛蜂窝夹层结构雷达罩外场损伤情况，介绍了在外场条件下的修理方法。