Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

基于视线角序列的机动目标视线角速率计算

 依据拦截弹与机动目标间的相对位置关系,采用导引头球面模型,基于当前统计模型,实现了强跟踪状态自适应滤波,计算出了可用于制导的视线角速率。该算法利用导引头球面模型,将测角信息转换成距离信息,进行方差自适应调整和卡尔曼滤波。在只给出视线角序列信息的情况下,根据相对状态滤波结果求出所需的视线角速率。     

基于过程工程的航空企业建模技术研究与实现

 通过研究国内航空企业建模的需求,探讨现有企业建模方法的不足,提出了基于过程工程的航空企业建模方法。首先针对航空企业的特点,尤其是考虑到航空军工企业对信息安全性的要求,给出了一个六元组表示的航空企业模型,并对航空企业模型的信息安全子模型进行了详细描述;然后研究了基于过程工程的航空企业建模的实现技术,包括企业模型体系、企业建模支持系统等。建立基于过程工程的航空企业模型,以模型为驱动,为航空企业信息系统的建立、实施和重构提供了基础和依据,适应了航空企业对企业模型动态响应性和信息安全性的要求。该研究成果已成功地应用于某大型航空企业两种型号飞机的研制,实践证明所提出的方法是可行和有效的。     

空间对接地面半物理仿真台系统仿真研究

 飞行器空间对接地面半物理(HIL)仿真台是进行空间对接技术研究、对接机构地面检测以及对接过程的故障复现等多种用途的关键设备。论文阐述了飞行器空间对接地面半物理仿真台系统建构思想。在此基础上推导出空间对接地面半物理仿真台的空间对接动力学模型。基于物理建模的思想,用SimMechanics工具箱建立了空间对接地面半物理仿真台的机械系统,用Matlab/Simulink建立了控制系统模型,建构了虚拟空间对接地面半物理仿真台。采用滞后补偿等使系统的闭环动态性能达到要求。在空间对接地面半物理仿真台虚拟样机上,采用无阻尼振荡模型对空间对接动力学模型等进行了验证,对空间对接的缓冲过程进行了仿真。仿真结果表明空间对接动力学模型是正确的,空间对接地面半物理仿真台系统的建构思想是可行的。     

Assessment and improvement of k-ω-γ model for separation-induced transition prediction

The purpose of this work is to improve the k-ω-γ transition model for separationinduced transition prediction. The fundamental cause of the excessively small separation bubble predicted by k-ω-γ model is scrutinized from the perspective of model construction. On the basis,three rectifications are conducted to improve the k-ω-γ model for separation-induced transition.Firstly, a damping function is established via comparing the molecular diffusion timescale with the rapid pressure-strain timescale...     

A spanwise loss model for axial compressor stator based on machine learning

In the early stage of aircraft engine design, the through-flow method is an important tool for designers. The accuracy of the through-flow method depends heavily on the accuracy of the loss model. However, most existing models cannot(or cannot well) provide the spanwise loss distribution. To construct an effective spanwise loss model, both turbomachinery knowledge and machine learning skills were used in this paper. A large number of numerical simulations were carried out to build a database con...     

Analytical solutions for Earth discontinuous coverage of satellite constellation with repeating ground tracks

This paper presents an analytical model for calculating the Earth discontinuous coverage of satellite constellation with repeating ground tracks by integrating and extending the application of coverage region and route theory. Specifically, the visibility condition for a ground point is represented as a coverage region in the two-dimension map of visibility properties, and the trajectories of satellites with circular orbits and repeating ground tracks are converted to several inclined lines in t...     

基于改进Johnson-Cook模型的5083P-0铝合金动态本构关系研究

为研究5083P-0铝合金在高应变率下的力学行为及本构模型,通过RPL100材料试验机和分离式霍普金森压杆(SHPB),对5083P-0铝合金进行了准静态及应变率范围950～3000 s-1的冲击动态压缩实验.结果 显示随着应变率的增加,5083P-0铝合金的屈服强度、流动应力增加,应变硬化率减小,具有应变硬化效应,正...     

基于MapReduce的CME参数识别模型并行计算技术

日冕物质抛射（Coronal Mass Ejection,CME）参数识别模型是太阳风预报过程的重要组成部分.在空间环境预报业务中,为提高太阳风预报的准确率,需要提高CME参数识别的精度.模型以计算任务串行的方式运行,运算效率低导致模型运算时间长,不能满足这种需求.CME参数识别模型的物理运算过程相互不独立,其在单节点上的运行方式不能满足并行化要求.基于MapReduce的并行计算框架,改进了CME参数识别模型的计算流程,提出CDMR（CME detection under MapReduce）方法,实现了CME参数识别模型的并行计算,并对比分析CME参数识别模型在串行计算和MapReduce并行计算下的运行时间,提高了模型的识别精度和计算效率.      

电磁场作用下包晶合金定向凝固过程传输模型的建立

建立了二元包晶合金在电磁场作用下定向凝固过程中多场耦合的数学模型,并根据包晶转变不同阶段的特点,提出了包晶转变中固相分数的计算办法。该模型可以计算电磁场作用下包晶合金定向凝固中的流动、传热、传质的过程,为电磁场作用下包晶合金定向凝固过程的数值计算及对实验结果的分析提供理论依据。