Collaborative image compression and classification with multi-task learning for visual Internet of Things

Widespread deployment of the Internet of Things(Io T) has changed the way that network services are developed, deployed, and operated. Most onboard advanced Io T devices are equipped with visual sensors that form the so-called visual Io T. Typically, the sender would compress images, and then through the communication network, the receiver would decode images, and then analyze the images for applications. However, image compression and semantic inference are generally conducted separately, and t...     

SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.     

ADS数据的处理和显示

基于航空卫星通信的飞行监视,即自动相关监视（ADS）,是航空卫星移动业务（AMSS）通信应用新领域,是建立在航空卫星通信基础上的一种新的飞行监视技术。该文介绍了基本ADS报告信息电文的组成及各部分的含义,着重阐述将所收到的ADS数据进行处理,并以直观易懂的表格及图象形式显示出来,便于确切地知道飞机的四维位置（纬度、经度、高度和时间）。     

现代对策论研究

对策论是研究斗争局势中冲突问题的数学理论,笔者长期以来在此领域进行了大量的研究探讨,本文概要介绍了主要工作。     

INTEGRATED GPS/INS OF PSEUDO-RANGE DELTA-RANGE SEMI-PHYSICAL SIMULATION'S RESEARCH

In order to further study the performance of tightly integrated navigation system of GPS/INS, a semi-physical simulation of tightly coupled system has been done based on the data gathered from the experiment of integrated system of GPS and INS. The closed-loop Kalman Filter and U-D discompose algorithm have been used. The simulation results associated to four integrated models of pseudo-range, delta-range, pseudo-range and delta-range alternation, and pseudo-range and delta-range synthesis have been provided, and the actual effects of variously integrated models have been analyzed. The results show that the pseudo-range and delta-range synthesis coupled model is the most effective to improve the coupled system performance and the individual delta-range coupled model had better be avoided in application.     

一个DIS实时通讯网络的设计与实现

以一个ＤＩＳ（分布交互仿真）实时网络的设计和开发过程为背景,研究了ＤＩＳ实时网络开发中的几个问题。在进行实时ＤＩＳ网络规划时,采用了多点传送的通讯服务方式,保证每个仿真应用只发送变化的信息,只处理与自身相关的信息。指出了进行数据的实时传输格式定义时应注意的几个问题,这些数据定义必须支持多种不同的操作系统和平台。最后给出了开发ＤＩＳ实时通讯软件的方法,包括通讯协议和应用编程接口的选择。     

线性分组码限距离译码器的性能分析

为了提高自动重传请求(ARQ)系统的通过率,在混合ARQ系统中,使用限距离译码器改善系统的性能。在限距离译码时,线性分组码纠正重量t的错误图样。纯纠错译码器和纯检错译码器都是限距离译码器的特例。本文首先介绍了Krautchouk多项式的几个重要性质,然后,用线性分组码及其对偶码的重量分布,分别导出了两种形式的错误译码概率的简化计算公式。由于生成函数方法的使用,成功地得到了重复码、汉明码和扩展汉明码的错误译码概率的解析公式,最后,讨论了Golay码和某些本原BCH码错误译码概率的计算方法。     

直升机旋翼载荷中的非线性强迫振动方程迭代算法

介绍用迭代方法求解直升机桨叶气动载荷中的非线性强迫振动方程。计算时,先假定诱导下洗已确定,求出桨叶的初始载荷;再通过非线性强迫振动方程求出弯－弯－扭弹性变形。以某一直升机为例,求出了桨叶的各阶谐波载荷和弹性变形。计算结果与实验数据吻合。     

Dirichlet边界条件低阶面无法的改进

对基于内部Ｄｉｒｉｃｈｌｅｔ边界条件的低阶面元法的速度分布提出一个改进算法。由极限过程结合高阶奇异积分的解析计算直接计算物面速度分布取代传统的偶强梯度法,以避免偶极强度边缘外推的困难。改进算法改善了ＶＳＡＥＲＯ分析中诱导阻力系数估值过低的问题。对后掠翼、前掠翼和翼身组合体等算例的计算表明,计算结果的准确度与高阶面元法相近。此外,直接积分法还可正确地计算外部流场速度分布。这是偶强梯度法不能完成的。     

一种多晶石墨的拉伸蠕变行为

对一种多晶石墨材料进行了拉伸蠕变试验后,用ＲＡＭＡＮＯＲＵ１０００拉曼光谱仪对蠕变前后的试样作了分析,并用扫描电镜观察了蠕变前后试样纵向剖面的孔隙变化。结果表明：在１７００℃,０．７ＭＰａ的应力作用下多晶石墨材料不发生明显蠕变。蠕变初期可用ε－ε０＝Ａｔｎ进行描述,在不同温度和应力下ｎ值从０．４８５～０．８之间变化。在同一应力条件下,随温度提高,ｎ值增大。激光拉曼光谱仪和扫描电镜分析表明,多晶石墨蠕变后石墨化程度增加、孔隙增多、变大。