高超声速流动壁面催化复合气动加热特性

针对高超声速流动壁面催化特性,计算了不同壁面催化复合系数条件下的球锥驻点热环境。引入了经验证的数值求解Navier Stokes方程的方法,在不同壁温500K～2500K的条件下分别分析了O 2和N 2气体在壁面处的催化复合气动加热特性,得到如下结论：（1） 原子复合放热将提高近壁面温度梯度,改变近壁面组分分布;原子复合放热一部分加热飞行器形成组分扩散热流,一部分加热近壁气体提高近壁温度梯度。（2） 在壁面催化复合系数较小时,原子复合放热主要转化为组分扩散加热,对于不同壁面温度,壁面催化复合系数α<0.1时,单一气体反应组分扩散热流小于总热流的20%。     

剪切同轴式喷嘴中心管壁厚对火焰的影响

为了研究剪切同轴式喷嘴中心管壁厚度对火焰的影响,针对LOX/CH4火焰,采用数值方法计算了三种不同喷嘴中心管壁厚的长方体形燃烧室内的燃烧过程,计算表明,对于较大的管壁厚度,在紧贴管壁下游的区域将形成较大的回流区,有利于火焰稳定在喷嘴出口处,还给出了采用相同几何结构燃烧室的LOX/CH4燃烧试验结果,试验也得出了同样的趋势,随着中心管壁厚度的增加,火焰中心明显前移。     

等离子体对燃气在补燃室中燃烧特性的影响

为研究等离子体对多组分燃气在发动机补燃室中的助燃特性,建立了多组分燃气供给系统以及扩散燃烧实验模型。测量了等离子体炬的发射光谱,得到了等离子体炬的主要激发态粒子;拍摄了多组分燃气在补燃室的扩散火焰照片,得到了等离子体对多组分燃气的扩散火焰形貌的影响;测量了补燃室4个不同截面上的静压和总压,分析了等离子体对多组分燃气在发动机中燃烧效率的影响。实验结果表明:等离子体炬主要产生氮气和氧气的激发态粒子;加入等离子体后,喷出冲压尾喷管的火焰长度得到进一步缩短,说明等离子体可以在更短的燃烧室长度内使得多组分燃气得到更加充分的燃烧;加入等离子体时,补燃室不同截面的静压和总压都会出现突升台阶,说明等离子体可以加快燃气的化学反应速率,提高多组分燃气在发动机中的燃烧效率,且等离子体功率越高,燃气燃烧效率的增长率越高。     

低耗散TVD格式及叶轮机内低马赫数流动模拟

推导了条件化预处理矩阵在守恒变量下的形式,以及三维任意曲线坐标系下的相应的系统特征值与特征矩阵。根据预处理技术修正了任意曲线坐标下的Harten-TVD格式,得到低耗散TVD格式,并讨论了抑制了压力速度失耦的方法。分别使用修正后低耗散格式与未修正的格式,对高负荷低压涡轮叶栅T106内低速流动:进口马赫数分别为0.1,0.01和0.001,进行数值模拟。计算表明,未修正格式不能得到有意义的结果,而修正后的低耗散格式,即使在极低的马赫数流动下,也工作良好。同时可以注意到:对于无粘流动,三种进口马赫数条件下,流场内等压线分布几乎是一致的。      

梯度磁场推进扩散火焰燃烧的实验研究

用数字粒子图像测速技术(DPIV)测量了扩散火焰周围气流在梯度磁场作用下的速度分布,并与无磁场作用下的速度分布比较。结果表明当梯度磁场作用于扩散火焰时,火焰周围气体运动被加速,火焰的形状变得尖锐,亮度增加。实验定量地验证了梯度磁场可以诱导气体对流的发生,从而进一步推进扩散火焰燃烧反应。     

Microstructure evolution of a hypereutectic Nb–Ti–Si–Cr–Al–Hf alloy processed by directional solidification

In this work, the Nb–14Si–24Ti–10Cr–2Al–2Hf–0.1Y alloy(at.%) was processed by the liquid–metal-cooled directional solidification(DS) at 1750 C with withdrawal rates of 1.2, 6,18 mm/min and post heat treatment(HT) at 1450 C for 10 h. The microstructures of the directionally solidified and heat treated samples were investigated. The results show that the microstructure of directionally solidified alloy mainly consists of petaloid Nbss+ Nb5Si3eutectics and Ti-rich Nbss+ Nb5Si3+ Cr2Nb eutectics. With the increase of withdrawal rate, the primary Nb5Si3is eliminated, Nbss+ Nb5Si3eutectic cells turn round and connected with the microstructure refinement and Nbss+ Nb5Si3+ Cr2Nb eutectics turn to a river-like morphology. After heat treatment,Nbss+ Nb5Si3+ Cr2Nb eutectics disappeared and petaloid Nbss+ Nb5Si3eutectics turn to a specific fiber-mesh structure gradually, which is promoted by higher withdrawal rates. Furthermore,both the volume fraction of Cr2Nb and the content of Cr in Nbssof Nbss+ Nb5Si3eutectics change regularly with the increase of withdrawal rate and heat treatment at 1450 C for 10 h.     

郑州航空港区极化效应与扩散效应研究

通过郑州市人均GDP的对比分析及主成分分析发现,在全国范围内,郑州航空港的极化作用呈增强态势,在全省范围内极化作用较为平稳;从主成分分析的结果看,郑州与其他城市相比,综合发展水平远远高于其他城市,极化现象比较明显;从郑州周边的城市看,郑州周边的城市的经济发展水平远高于其他城市,扩散作用比较明显,而与郑州市距离较远的城市,经济发展水平相对较低,符合扩散作用随着距离变化逐步衰减的规律。政府应进行相对均衡的规划设计,不仅要扶持增长极的发展,对偏远地区也要进行适当倾斜,防止区域差距进一步扩大。     

Effect of hygrothermal aging on moisture diffusion and tensile behavior of CFRP composite laminates

Carbon Fiber Reinforced Polymer (CFRP) composites are widely used in aircraft structures, because of their superior mechanical and lightweight properties. CFRP composites are often exposed to hygrothermal environments in service. Temperature and moisture can affect the material properties of composites. In order to make clear the moisture diffusion behavior and the properties degradation of composites, the TG800/E207 composite laminates with four stacking sequences [0]₁₆, [90]₁₆, [±45]_4s, and [(+45/0/0/–45)_s]_s are designed and manufactured. Moisture absorption tests are carried out at 80 ℃, 90 %RH. It is shown that the moisture absorption curves of composite laminates present a three-stage. A modified Fickian model was proposed to capture the diffusion behavior of TG800/E207 composite laminates. The relationships among the non-Fickian parameters, the environmental parameters and the stacking sequences of CFRP were correlated and compared. Results showed that the modified Fickian curve is sensitive to the diffusivity of Stage I and Stage II. Compared with unaged specimens, the maximum tensile stress for [0]₁₆, [90]₁₆, [±45]_4s, and [(+45/0/0/–45)_s]_s decreased by 14.94 %, 28.15 %, 11.96 %, and 26.36 %, respectively. The strains at failure for [0]₁₆, [90]₁₆, [±45]_4s, and [(+45/0/0/–45)_s]_s decreased by 55.38 %, 62.65 %, 46.41 %, and 31.71 %, respectively. The elastic modulus for [0]₁₆, [90]₁₆, [±45]_4s, and [(+45/0/0/–45)_s]_s increased by 90.93 %, 94.57 %, 49.22 %, and 8.22 %, respectively. [90]₁₆ sample has the minimum saturated moisture content and the maximum strength degeneration.     

Aspects related to variability of radiative cooling by NO in lower thermosphere,TEC and O/N2 correlation,and diffusion of NO into mesosphere during the Halloween storms

Nitric Oxide is a very important trace species which plays a significant role acting as a natural thermostat in Earth’s thermosphere during strong geomagnetic activity. In this paper, we present various aspects related to the variation in the NO Infrared radiative flux (IRF) exiting the thermosphere by utilizing the TIMED/SABER (Thermosphere Ionosphere Mesosphere Energetics and Dynamics/ Sounding of the Atmosphere using Broadband Emission Radiometry) observational data during the Halloween storm which occurred in late October 2003. The Halloween storm comprised of three intense-geomagnetic storms. The variability of NO infrared flux during these storm events and its connection to the strength of the geomagnetic storms were found to be different in contrast to similar super storms. The connection between the quantum of energy outflux from the upper atmosphere into space in terms of NO IRF and the duration of storms is established. The NO radiative cooling, and the closely correlated depletion in O/N₂ ratio are controlled by the Joule heating intensity (proxied by AE-index). The collisional excitation rate of NO, calculated using the modelled datasets of WACCM-X (Whole Atmosphere Community Climate Model with thermosphere and ionosphere extension), correlates well with the observed pattern of radiative emission by NO. Observational datasets from TIMED/GUVI (Global Ultra-Violet Imager) and MIT Haystack observatory madrigal GNSS (Global navigation satellite system) total electron content (TEC) database shows that the TEC and O/N₂ enhancement in low-mid northern hemispheric latitudes are mainly controlled by the z-component of Interplanetary magnetic field (IMF-B_z). The penetration of eastward electric field during the storm events is found to be responsible for the overall enhancement of TEC. The contribution of enhanced day-side TEC in observed variation of O/N₂ ratio by GUVI is also reported. It is also seen that during substorms related events the night-time polar region experiences more cooling due to NO than the daytime polar region. The connections between the mid- and low-latitude enhancement in NO IRF with the propagation of LSTIDs (Large-scale traveling ionospheric disturbances) in combination with the O/N₂ variability, and the altitudinal variation in NO flux with the progression of the storm is also investigated. This study presents the evidence on the role of diffusion processes in the large scale enhancement of NO in the mesospheric altitudes.     

修复金属板裂纹的复合材料补片正交优化

基于Abaqus软件建立了金属板裂纹复合材料补片修复结构的有限元模型。以应力强度因子(SIF)为判据,利用L9(34)型正交实验考察了各补片参数对修复效果的影响。结果表明:在99%置信度水平下,补片厚度的贡献率为68.77%,铺层顺序的贡献率为29.59%,而补片长度对修复效果的影响不明显。结合工程应用实际与正交分析结果,利用设计好的补片对含中心贯穿裂纹的铝合金板进行了修复,并对修复结构进行了静强度测试。结果表明:修补后静强度为未修复裂纹板的1.32倍,恢复至完好板的97.2%,延伸率为未修复裂纹板的2.24倍,恢复至完好板的50.7%。结论:选用长度为40 mm,厚度为1.2 mm,铺层顺序为[0°/90°]s的正方形补片时修补效果最好。