激光诱导碳等离子体在强激光冲击合成金刚石微晶中的作用

通过对Ｒａｍａｎ光谱及激光诱发碳等离子体的进一步分析研究,讨论了强激光冲击合成金刚石微晶过程中碳等离子体的作用机制。碳等离子体可视为高活性、高动能碳粒子集团,其对石墨相的作用同时包括能量传输和质量传输两个过程,因此碳等离子体在促进石墨相结构畸变、结构重组乃至相变方面起到了重要的作用;从能量阈值角度分析了碳等离子体与石墨相之间的四种磁撞类型,并据此对Ｒａｍａｎ谱线随激光功率密度的变化规律提出了较为合     

激波过弯道绕山坡对三维物体的冲击效应研究

采用全息干涉技术在高速流态试验装置 (激波管 )上研究了激波过弯道绕山坡到达三维物体的整个过程的流场 ,还采用传感器压力测量技术对三维物体表面的压力分布进行了定量测量。结果表明 ,激波对三维物体与山坡的接合部、物体背风面及其拐角位置的影响是最大的 ;对于研究爆炸冲击波在复杂地形下对建筑物的冲击载荷有重要意义。     

平方阻尼在非线性缓冲系统中的作用

本文讨论平方阻尼(以参数a表征)在图(1)所示的缓冲系统中的作用,结果表明:平方阻尼对于降低相对位移峰值d_m总有良好的效果,但不一定降低加速度峰值a_m。在一定速度冲击V下,系统的平方阻尼有两种最佳值,使a_m最小的a_(am)和使缓冲效率γ最高的a_(cm),而平方阻尼最佳条件依赖于系统的缓冲弹簧的刚度变化类型: (1)线性弹簧情况:a_(am)=a_(cm),最佳条件为系统在首程中均匀减速; (2)渐硬弹簧情况:a_(am)=a_(cm),最佳条件为系统在首程中初始和终末加速度相等即; aV~2=ω_0~2q(dm) (3)渐软弹簧情况:a_(cm)>a_(am)。 本文的基础是所谓“首程显峰”,假定即系统在速度冲击V下的响应峰值d_m和a_m出现在第一行程中。当平方阻尼值不太小,缓冲弹簧刚度特性接近反对称时,该假定成立。     

爆炸冲击波对反舰导弹发动机舱的毁伤效应

为研究爆炸冲击波对来袭反舰导弹发动机舱的毁伤效应,应用ANSYS/LS-DYNA软件,对定量TNT和压装8701炸药爆炸产生的冲击波毁伤不同距离处的反舰导弹发动机舱进行了数值模拟。计算结果表明:爆炸冲击波对导弹发动机舱的毁伤以壳体凹陷为主要形式,对凹陷壳体周围区域几乎没有影响;爆炸冲击波对反舰导弹发动机舱的毁伤效应,随起爆点距离增加而迅速减小,且初期衰减速度明显大于后期。10 kg的装药量、炸点位于3 m处时,TNT和压装8701炸药对反舰导弹发动机舱基本无法造成毁伤。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

一种修正的Osher通量在高阶WCNS中的特性

将一种基于多维修正的Osher通量运用于高阶加权紧致非线性格式(WCNS)中,该修正通量主要在垂直于激波面的界面上增加耗散,能够改善Osher通量的激波捕捉稳定性,同时对边界层和接触间断的分辨率影响非常小。对修正的Osher通量在高阶WCNS中的特性进行研究,通过数值模拟测试了基于Osher通量的WCNS的激波稳定性、热流预测精度、边界层模拟能力、激波边界层干扰模拟能力,并与Steger-Warming通量和Roe通量进行了对比。结果表明修正后的Osher通量比Harten修正的Roe通量具有更好的激波捕捉鲁棒性,而边界层、驻点热流值和激波边界层干扰的模拟则明显优于Steger-Warming通量。上述结果说明了基于修正的Osher通量的高阶WCNS具有较好的激波捕捉特性、热流预测精度和边界层计算能力。     

航空发动机风扇叶片两种表面处理方法对比

在对激光冲击强化技术与喷丸表面强化技术比较分析之后,表明航空发动机叶片经过激光冲击强化后,能显著增加叶片表面残余压应力,提高疲劳性能,并且其效果优于喷丸表面强化技术。     

包带低冲击装置冲击试验及数据分析

文章主要阐述了包带低冲击装置冲击试验的过程及采用的试验技术,并对试验数据进行了处理和分析。通过大量的试验数据,对响应量级与测量点的位置分布、响应与包带预紧力的关系、冲击响应与装药量的关系、冲击响应与起爆器的关系、冲击响应的频率分布关系以及安装方式对试验结果产生的影响作了充分的分析。结果可为研究低冲击装置提供有价值的参考。     

Shock protection of penetrator-based instrumentation via a sublimation approach

It is often necessary for space-borne instrumentation to cope with substantial levels of shock acceleration both in the initial launch phase, as well as during entry, descent and landing in the case of planetary exploration. Current plans for a new generation of penetrator-based space missions will subject the associated on-board instrumentation to far greater levels of shock, and ways must therefore be found to either ruggedize or else protect any sensitive components during the impact phase. In this paper, we present an innovative method of shock protection that is suited for use in a number of planetary environments, based upon the temporary encapsulation of said components within a waxy solid which may then be sublimated to return the instrument back to its normal operation. We have tested this method experimentally using micromachined silicon suspensions under applied shock loads of up to 15,000g, and found that these were able to survive without incurring damage. Furthermore, quality factor measurements undertaken on these suspensions indicate that their mechanical performance remains unaffected by the encapsulation and subsequent sublimation process.     

气体自发光在高超声速流场显示中的应用

提出了利用高焓气体自发光作为高超声速流场显示的方法,介绍了在使用高焓运行的激波风洞中,对二维模型的高超声速绕流流场使用此种方法的初步结果,可观察到二维棱形柱的尾流和马赫波的相交。结果表明此种方法不需外加光源,对于结构限制无法设置透明部件的模型,无疑是简单可行的。