Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

纵向短周期模态试飞方法和选择

对几种纵向短周期模态试飞方法及其适用性进行了初步分析。结合实际飞行经验,提出了初步判断飞机短周期特性及选择试飞方法。     

基于模糊粗糙集的飞机远程故障诊断模型研究

粗糙集和模糊集结合在飞机故障诊断领域有巨大的发展潜力。针对当前飞机故障诊断中所存在的问题,借助C/S模式,将粗糙集和模糊集结合,提出一种新型的飞机远程故障诊断模型,并且开发出远程诊断系统框架。系统的可行性和有效性得到了飞机故障诊断实例的证实。该系统具有客户端响应快、系统效率高、诊断及时的特点,对于当前民用飞机远程故障诊断具有重要应用价值。     

动态差压检测系统的共模误差研究

主要针对以差压变送器为核心的动态差压检测系统的特点 ,应用流体网络分析方法 ,提出了动态差压检测系统中的共模误差问题。理论分析和仿真计算结果表明 :共模误差与检测系统两侧引压管路的不一致性直接相关 ,为了获得动态差压信号的准确检测 ,必须对动态差压检测系统的共模误差予以抑制     

正—反激组合式变换器与单端式变换器的比较

以５０Ｗ变换器为例，分别从磁性元件的大小，功率管上的电应力、磁恢复问题，输出纹波及输出特性等方面，详细分析比较了组合式变换器与单端式变换器的优缺点，并给出了具体数据，提出了正－反激组合式变换器具有电压应力低，磁性元件小，体积小，重量轻，输出纹波小及可靠性高的结论。     

传输型光学遥感器斜模式采样新方法研究

文章介绍了实现超模式采样焦平面3种解决方案面临的技术难点，为避开器件问题提出了一种新的斜模式采样方法。以任意两维周期采样理论为基础分析了斜模式采样技术的物理原理，并通过实验手段验证了斜模式采样技术的可行性。试验结果表明：改变探测器推扫方向的采样间距符模式采样技术可以提高传输型光学遥感器图像的空间分辨率，该技术相对于超模式采样技术，工程实现上要简单。     

导弹电液伺服机构的模糊滑模变结构跟踪控制研究

为减小导弹电液伺服机构滑模变结构跟踪控制中的抖振,研究了一种模糊滑模变结构控制(FS-MVSC)方法。给出了模糊滑模控制器的构成,以及模糊化、模糊规则与推理、反模糊化处理的方法。在保持系统对参数变化和外干扰不确定强鲁棒性的同时,可使系统具有较优的动态响应和稳态控制精度。仿真结果表明,该控制方案有效。     

Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

新型总线式电子设备结构设计

讨论了用现代设计方法学理论确定总线式电子设备结构设计方案的方法 ,将现代设计方法学理论应用于结构设计 ,可以使设备结构设计更加合理 ,使电子设备更能适应新技术的发展和设计周期短 ,生产批量大的要求。     

电液伺服系统的间接自适应模糊滑模跟踪控制

为改善电液伺服系统的跟踪控制,根据滑模控制原理和模糊系统逼近能力,设计了一间接自适应模糊滑模跟踪控制方案。该法以自适应模糊系统替代系统自治特性,用滑模方式设计控制律,在滑动模态附近建立一边界层,以平滑不连续控制削弱抖振。仿真结果表明该方案有效。