Mechanism of stall and surge in a centrifugal compressor with a variable vaned diffuser

To expand the stable operating range of compressors, understanding the mechanism of flow instability at low flow rates is necessary. In this paper, the mechanism of stall and surge in a centrifugal compressor with a variable vaned diffuser is experimentally investigated, where the diffuser blade setting angle can be adjusted. Many dynamic pressure transducers are mounted on the casing surface of the compressor. From the design condition to surge, dynamic pressure data is recorded throughout the gradual process. According to the signal developing status, the typical modes of compressor instability are defined in detail, such as stall, mild surge, and deep surge. A relatively high-frequency stall wave originates in the impeller and propagates to the diffuser, and finally stimulates a deep surge in the compressor. The compressor behavior during surge differs at different diffuser vane angles. When the diffuser vane angle is adjusted, both the unstable form and the core factor affecting the overall machine stability change. A specific indicator is proposed to measure the instability of each component in a compressor, which can be used to determine the best region for stability extension technologies, such as a holed casing treatment, in different compressor applications.     

The effect of the longitudinal propagating waves on the electron acceleration in the reconnecting current sheet

Based upon the most efficient electron acceleration near the midplane of 3D non-neutral driven reconnecting current sheet (RCS) and the electrostatic wave excitation by the drift Maxwellian distribution of electrons in Vlasov simulation, we assume that the electrostatic waves mainly propagate opposite to the reconnecting electric field and investigated how these waves affect the electron acceleration. The main results are: (1) when the electron’s velocity equals to the phase speed of the waves, they will be trapped and have the different accelerating characteristics from the untrapped electrons through solving the momentum equations of electrons analytically; (2) the test particle simulations further prove that the number of the energetic electrons decreases with the increasing intensity of unstable waves, and the distribution of the energetic electrons takes on the double power-law.     

用弱非线性理论研究二次稳定性问题

本文把研究三波共振的弱非线性理论应用于平板边界层和平面Poiseuille流三维扰动的二次稳定性问题。其数值结果与文献[1]、[2]用Floquet形式的二次稳定性理论得出的结论是一致的。     

放宽静稳定性在空空导弹总体设计中的应用

将主动控制技术引入空空导弹总体设计中，研究了空空导弹放宽静稳定性设计问题，讨论了放宽静稳定性设计对导弹性能的改善，最后给出了静不稳定弹体的系统稳定性判定条件，并着重讨论了静不稳定弹体的人工稳定问题，研究结果对于新一代先进空空导弹的总体设计工作有一定的参考价值。     

脉冲爆震发动机稳定工作性能的实验研究

为了对脉冲爆震发动机不同工作频率下稳定工作范围进行深入的研究,实验对汽油/空气可爆混气在不同工作频率、不同当量比下爆震发动机模型机的爆震压力和推力进行了测试,找出了不同频率下发动机稳定工作的最大和最小当量比。实验发现,当工作频率较低时发动机的稳定工作范围较宽,随着工作频率的增大,发动机的稳定工作范围逐渐变窄。在同一工作频率下,爆震发动机的平均推力随着当量比的增加是先增后降,但变化幅度很小,而混合比冲则是随着当量比的增加急剧下降。另外,在当量比一定的情况下,脉冲爆震发动机的平均推力随着工作频率的提高接近线性增加。     

用于爆震引燃的激波聚焦无反应流场数值模拟

通过对用于脉冲爆震引燃的内楔表面激波聚焦冷态流场的数值模拟，分析了不同角度内楔表面在激波聚焦时流场结构的不同特点。数值计算的结果表明：对于大内楔角的情况，激波进入内楔角之后产生规则反射，温度的大幅度升高发生在激波于内楔顶点反射之后；对于小内楔角的情况，激波进入内楔角之后产生马赫反射，温度的升高在入射激波到达内楔顶点之前就已经发生，而在入射激波于内楔顶点反射之后得到进一步的提升。同时，还对不同角度内楔的反射激波后气流温度进行了比较。     

脉冲爆震发动机的应用研究

与目前和不久的将来的推进系统相比,脉冲爆震发动机(PDE)具有明显的性能优势,并且有可能降低飞行器制造和执行任务的成本,因此在近年备受关注。本文主要讲述一些与PDE实际应用有关的问题:工作频率要求、理论频率换算规律、单燃烧室和多燃烧室对比、PDE实际工程应用以及影响PDE性能的诸多因素。     

二维平行剪切层声波产生和辐射的数值模拟

 在二维线化Euler 方程的基础上解决了第3 届计算气动声学专题讨论会的第5 类标准问题: 二维平行剪切层声波的产生和辐射。频散相关保持有限差分格式用于空间离散, 低频散低耗散的龙格库塔法用于时间积分。重点使用了远场无反射边界条件。计算结果与NASA GLENN 研究中心的解析解符合得很好。     

氢氧气体爆轰光谱的研究

在以前用摄谱仪研究激液管内氢氧气体爆轰光谱的基础上，用光学多道分析仪（ＯＭＡ光学系统）收集了不同初始压强条件下３００～８００ｎｍ光谱范围氢氧气体爆轰的低分辨和高分辨光谱．     

成形极限曲线（FLC）的新概念

失稳理论是FLC的理论基础。文章论述了FLC理论研究中存在的问题。指出:一般出厂板的表面状况不会影响板料的集中失稳;板内损伤平面应变时最严重。双拉时,板内损伤的积累、发展,导致应力状态向平面应变漂移;拉压时,载荷失稳后引起的双拉,也会导致平面应变。因此平面应变状态的出现是板料集中失稳的共同原因。在此基础上提出了建立FLC的统一的模型。