点火瞬态过程仿真模型参数辨识

建立了固体火箭发动机点火瞬态过程一维非定常流场仿真模型,采用系统辨识方法进行了模型参数不确定性研究。基于点火试验用缩比发动机试验结果,得到了传热模型参数和瞬态燃速模型参数的最优估计,提高了点火瞬态过程一维仿真模型的预估精度。采用近似方法,构建Kriging近似函数,有效解决了一维非定常流场仿真的计算复杂性问题。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

一种弹性低密度耐高温隔热涂层

针对固体火箭发动机实际使用的热环境要求,研制了一种弹性低密度耐高温隔热涂层,通过石英 灯辐射和电弧风洞试验对其进行了防热性能考核。该涂层密度为0. 62 g/ cm3,伸长率为25%,热导率为0． 18 W/ (m·K);在401℃时DSC 失重率仅为6. 6%;验证考核表明,采用1. 0 mm 涂层时,壳体与涂层界面温度最高 为77. 3℃,壳体背温度最高为44. 5℃。     

基于功能危险性评估的民用飞机驾驶舱门设计探讨

FAA分别于2002年和2008年颁布25-106及25-127修正案,增加驾驶舱门安保事项以提高驾驶舱的安全水平。修正案要求加固驾驶舱门,驾驶舱门必须设计成可以阻止未被授权人员进入驾驶舱并且阻碍危险物体射入以保证机组人员的安全。驾驶舱门必须能检测驾驶舱失压并可以释放门或者卸压板平衡压力差,还应有措施使飞机机组成员在该舱门卡住的情况下能直接从驾驶舱进入客舱。因此,在驾驶舱门上设有一个可以快速释放的紧急出口。根据飞机驾驶舱门结构及功能的主要特点,对驾驶舱门功能故障进行探讨,同时对功能故障引发的危险性等级进行划分,以确定安全指标,进而辅助驾驶舱门设计工作。     

变任务混频寿命相关载荷累积量分布特性

在基于固定任务混频的寿命相关载荷累积量分布特性研究成果的基础上,推导了变任务混频条件下的寿命相关载荷累积量分布特性,结果表明:变任务混频的载荷参数累加量分布函数也是趋于正态分布.并采用数值方法模拟实际飞行过程中变任务混频条件下寿命相关载荷的累积过程,模拟结果和理论结果吻合良好,进一步验证了分析结果的正确性.该结果可用于变任务混频下的寿命可靠性预测.      

基于密度权重的可靠性灵敏度分析方法

为了提高可靠性灵敏度求解数字模拟法的效率,提出了一种变量空间确定性低偏差均匀抽样与样本点处联合概率密度函数构造权重相结合的方法,来估计可靠性灵敏度。该方法通过均匀样本点处联合概率密度函数的权重保证了可靠性灵敏度的估计值收敛于真值,而由低偏差抽样代替原问题中的联合概率密度抽样则可以保证更低的误差阶以及在小失效概率条件下抽得的样本有更高的可能性落入失效域,从而保证了所提方法具有更高的收敛速度。另外,所提方法可以采用与独立变量相同的步骤来估计相关变量情况下的可靠性灵敏度,计算简便,适用范围广。算例充分证明了所提方法的优越性。     

基于径向基函数改进的Delaunay图映射动网格方法

为了提高大变形下动网格生成的效率和质量,基于径向基函数插值技术对原始Delaunay图映射动网格方法进行了改进。首先通过带多项式的径向基函数插值方法计算出背景网格远场边界点的位移;然后将背景网格位移插值到计算网格;最后利用衰减函数将计算网格远场位移衰减为零。基于矩形旋转网格变形实例比较了改进方法与原始Delaunay图映射动网格方法之间的差别,并研究了径向基基点数目和衰减函数类型对变形网格质量的影响。矩形旋转网格变形实例说明该方法能够精确恢复出Delaunay背景网格的旋转特性。NACA 0012翼型、NLR 7301两段翼和M6机翼网格变形算例进一步证明,通过添加控制点,该方法能够不重构背景网格实现大变形下高质量动网格的生成。     

区域杂波估计的多目标跟踪方法

高斯粒子概率假设密度（PHD）滤波往往假定杂波密度参数已知,这种做法对于实际应用是不现实的。此外,杂波的参数值通常依赖于环境条件,可能随时间发生变化。因此,多目标跟踪算法中需要实时准确估计杂波密度的参数。基于此,提出了一种多目标跟踪的区域杂波估计方法。首先根据量测信息在线估计出场景中的杂波数目,然后估计落入目标附近感兴趣区域的杂波数,并估计每个目标感兴趣区域杂波强度。仿真结果表明,在复杂场景下算法的跟踪性能明显优于未进行杂波估计的多目标跟踪算法,提高了跟踪的实时性和跟踪精度。     

基于模型的民机自动飞行功能分析与设计

描述了民用飞机自动飞行系统基于模型的功能分析与架构设计过程。该研究采用符合现代系统工程理念的模型化设计形式,表明和确认系统功能在各种运行决策、人机交互和外部环境中的变化。它针对系统级功能静态、动态特性进行结构化分析和设计,系统性地研究外部对象、应用用例、功能逻辑、交联时序和状态跳转,在确认模型的合理性后生成逻辑架构与接口,将设计需求进行分配,用于设计实现和软硬件架构。该研究通过对飞行导引、自动推力、自动着陆、机组通告等功能的可用性和完整性进行分析检验,改进了功能需求设计。