可控枝晶生长法制备二维多孔金属

将分形几何与电化学原理相结合,编程模拟了射流电沉积中枝晶的分形生长。以平行板金属镍为阳极,石墨板为阴极,用自行设计的实验设备,通过定点喷射电沉积法制备了二维分形的镍枝晶,并采用扫描喷射电沉积法成功地改变了枝晶的分形生长,实现了枝晶的可控交织生长,进而制备了二维多孔金属材料。结果表明,扫描喷射电沉积是可以成功制备多孔金属,从而为高性能多孔金属材料的制备提供了一种全新的方法。     

空间充气薄膜衍射成像结构的热力耦合分析

随着空间光学技术的发展,衍射成像系统成为空间光学领域的研究热点。提出了一种充气薄膜衍射成像结构设计方案,针对其在空间热载荷作用下的热力耦合效应开展研究。建立了充气薄膜衍射成像结构的热力耦合顺序分析框架,基于I DEAS和ANSYS软件二次开发技术,实现了热力耦合数值分析,得到了结构在轨运行时的瞬态温度场、热应力、热变形等。分析结果表明,充气支撑结构产生了较大热变形,但最大热应力远小于聚酰亚胺薄膜材料的抗拉强度,而镜面中心处没有出现较大的热变形响应,为充气薄膜衍射成像结构的防热设计提供了技术支持。     

并列双方柱的疏水涂层防冰效果结冰风洞实验评估

采用结冰风洞实验研究的方法,利用0.3m×0.2m结冰风洞主实验段,在不同结冰气象条件下对涂覆在并列双方柱实验模型表面的不同纳米疏水涂层结冰特性进行了实验研究,对左右并排的方柱实验模型表面的结冰外形进行了测量和比较,建立了基于9个结冰外形几何特征量的防冰效果量化评估方法,对有、无纳米疏水涂层表面的结冰外形几何特征量无量纲化偏差进行了计算和分析。研究表明:基于结冰外形几何特征量的防冰效果量化评估方法可以较好地评估纳米疏水涂层的防冰效果。与未涂覆防冰涂层的铝合金材料相比,硅橡胶及其添加颗粒的纳米涂层均具有一定的防冰性能,与硅橡胶涂层相比,有的添加颗粒的纳米涂层防冰效果略好一点,而有的略差一点,没有明显提高。在硅橡胶基底材料中添加纳米疏水颗粒,可以在涂层表面构筑一些微纳结构,从而起到防冰作用。因此,在硅橡胶涂层中添加纳米疏水颗粒是一种值得探索的防冰涂层制备研究方向,但如果仅采用物理混合搅拌的方法,纳米颗粒难以在硅橡胶涂层表面形成稳定疏水性能的微纳乳突结构。纳米疏水涂层只能降低结冰速率,无法完全杜绝材料表面的结冰现象。      

Reduction of vibration by periodically stitched sandwich panel

This work reveals that the addition of periodically distributed stitches to sandwich structure enables a significant reduction of vibration in stop-band and this new functionality is systematically investigated. Firstly, a finite element model which is capable of taking into consideration the three layers of the sandwich as well as the stitches is developed. The diagram of dispersion is calculated by applying Floquet-Bloch theorem to the boundaries of unit cell. With properly chosen properties of stitches, a stop-band for flexural wave is observed. This stop-band is further confirmed by the forced response of a large stitched sandwich panel under point excitation. The level of vibration in the stop-band is significantly reduced. The influence of the stitch rigidity and density on upper and lower limits of stop-band is also examined, which confirms that stitched sandwich can be tuned to mitigate vibration in a certain frequency band with appropriate stitch properties. These investigations have demonstrated the potential application of stitched sandwich in the area of vibration reduction.     

Multi-layered plate finite element models with node-dependent kinematics for smart structures with piezoelectric components

This article presents a type of plate Finite Element (FE) models with adaptive mathematical refinement capabilities for modeling laminated smart structures with piezoelectric layers or distributed patches. The p-version shape functions are used in combination with the higher-order Layer-Wise (LW) kinematics adopting hierarchical Legendre polynomials. Node-Dependent Kinematics (NDK) is employed to implement local LW models in the regions with piezoelectric components and simulate the global substrate structure with the Equivalent Single-Layer (ESL) approach. Through the proposed NDK FE models, the electro-mechanical behavior of smart structures can be predicted with high fidelity and numerical efficiency, and various patch configurations can be conveniently modeled through one set of mesh grids. Moreover, the effectiveness and efficiency of the NDK FE approach are assessed through numerical examples and its application is demonstrated.     

Initial phase of mid-latitude aurora during strong geomagnetic storms

Analysing the initial mid-latitude aurora phase during strong geomagnetic storms we found that the initial phase of the mid-latitude aurorae observed at 630 nm emission during the strong geomagnetic storms on March 24, 1991, April 6, 2000, October 30 and November 20, 2003 is characterized by a short (∼1 h) wave-like disturbance. This disturbance corresponds to the beginning of main phase of the magnetic storms. The marked effect of the mid-latitude aurorae is analyzed using data on magnetosphere and ionosphere conditions in observation periods. The features of the dynamics of the 630 nm emission intensity and its connection with the dynamics of magnetospheric–ionospheric structures are considered. Possible excitation mechanisms of the atomic oxygen emission (630 nm) during these disturbances are discussed.     

Residual stress determination in friction stir butt welded joints using a digital image correlation-aided slitting technique

This paper presents an incremental cutting method for evaluating the longitudinal residual stresses in a butt welded thin plate via combining the traditional residual stress measurement methods and the advanced optical technique.The proposed approach,which can be called digital image correlation (DIC)-aided slitting technique,introduces a successive extension slot to a speci men and employs the DIC technique to measure the released displacement profiles of the cutting sections after each cutting increment.Then the displacement profiles are used to directly calculate the residual stress distributions up to the slot tip and hence,a stress distribution can be obtained after a cutting increment.Finally,all of the stress distributions are averaged to ultimately determine the original residual stress field.This method does not include any complex experimental operations or tedious derivation,and the resolution of stress variation is greatly improved by the continuous measurement of the released displacements.The presented method has been preliminarily verified by a specimen with residual stress introduced by a four-point bending test.The results show that residual stresses determined by the DIC-aided slitting technique agree well with those from finite element (FE) prediction.The residual stress in a friction stir welded aluminum specimen obtained by the presented technique is also consistent with the evaluations given by X-ray diffraction.Fur thermore,the residual stresses obtained by the DIC-aided slitting technique demonstrate higher accuracy and stability than the evaluations derived by the DIC-aided contour method.     

基于线性频散信号构建的复杂航空结构Lamb波高分辨率损伤成像

在对复杂航空结构的Lamb波损伤成像中,Lamb波频散容易使信号波包发生扩展和变形,从而降低信号的分辨率,并最终影响损伤监测结果,因此Lamb波频散补偿已成为急需解决的一个重要问题。目前常用的频散补偿方法需要理论计算Lamb波频散曲线,难以适用于复杂航空结构。本文利用现场直接测得的相对波数曲线进行线性频散信号构建(Linearly-dispersive signal construction,LDSC)的频散补偿处理,解决了航空复杂结构中Lamb波频散难以补偿的问题。然后,将LDSC用于延迟叠加损伤成像中,以实现高分辨率损伤成像。为了降低多反射的复杂航空结构形式对成像结果的影响,引入了1.5波峰正弦调制的准宽带Lamb波激励波形。最后通过在真实复杂的某型飞机大梁结构上的实验证明了所提方法的有效性。     

曲面复合材料胶接修补参数优化

随着复合材料在航空结构上的应用越来越广泛,国内外对受损复合材料结构的修补问题开展了较多的研究,但目前所开展的研究基本上是针对平板结构的修补,曲板结构修补的研究开展很少,所以迫切需要开展这方面的研究。本文针对曲板复合材料孔洞型穿透性损伤,采用方形复合材料补片胶接贴补方式,对影响修补效率的多个胶接参数进行了分析计算。在有限元分析中,考虑到曲面复合材料的外形特殊性,及胶接修补的特点,建立了修补结构的力学分析模型:“三实体模型”。有限元分析采用ANSYS软件,所得结论对工程应用具有实用价值。     

不同相位壁面局部微振动诱导边界层大涡结构

以平板边界层Blasius解为基本流,利用直接数值模拟的方法求解三维不可压缩N-S方程,研究了边界层中不同初始相位壁面局部微振动诱导大涡结构的过程。计算结果表明:壁面扰动初始相位为0或π,大涡结构的初始扰动速度场完全相反,初始相位为0时,大涡结构演化时无论其扰动速度幅值、高低速条纹结构,流向涡量均随时间的增加而增长,壁面平均切应力明显大于平板边界层流动,近壁平均速度剖面变得饱满;初始相位为π时,诱导形成的大涡结构较弱。壁面局部微振动可诱导边界层内形成大涡结构,大涡结构演化特性与局部微振动初始相位密切相关。