基于MBD的飞机装配工装协同变更方法

装配工装在飞机产品生产过程中处于飞机设计的下游,受到飞机装配件设计及其装配工艺的影响以及飞机生产准备周期限制,时间紧迫,任务繁重。传统的飞机装配工装以文本、二维图形式表达为主,信息是静态的,缺乏唯一的数据源易导致飞机-装配工装协同变更管理效率低、准确性差,针对以上问题提出一种飞机-装配工装协同变更方法:利用基于模型的定义(Model based definition,MBD),建立了飞机和装配工装MBD模型关系架构,并结合相关的变更传播计算方法实现了飞机设计结构变更对装配工装变更影响的主动、自动化预测和分析。通过一套飞机壁板开口加强框的装配工装变更设计实例验证了该方法的可行性。     

Multiple-site investigation of the properties of an HF radio channel and the ionosphere using Digital Radio Mondiale broadcasting

The Digital Radio Mondiale (DRM), one of the new digital radio broadcasting standards, has been designed to overcome typical short wave radio channel difficulties, such as the multipath propagation and fast temporal changes of the received signal level, both related to the properties of the ionosphere along the path of propagation. In particular, some of the RF carriers used in the applied COFDM transmission technique serve to estimate the current state of the radio channel to enable the proper demodulation of the received signal.We have been detecting such RF carriers on select frequency channels (standard DRM broadcast) using a network of recording stations located in different parts of Poland in order to collect data on the HF radio channel. We have been also evaluating the usefulness of this procedure in providing information on the current state of the ionosphere in the refraction region between the transmitter and receivers. When the DRM system becomes more widespread, this method can supplement data that comes from the ionosondes, since it does not require much financial resources and the receivers can be easily scattered over a large area. This paper presents a set of experimental data and its analysis.     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

脉冲激光测距误差标定及不确定度分析CSCD

以脉冲激光测距机的测距误差标定为背景,通过对测距误差解析表达式的推导,给出了系统各不确定度分量对测距误差的影响,计算了信号延迟时间、探测器和激光二极管响应时间、晶振频率、大气折射率等不确定度分量。通过对某已标定激光测距机实验验证表明:该装置在500m^20 000m测距范围内,测量重复性引入的相对标准不确定度最大值为0.67m,满足该类激光测距机测量不确定度5m(k=2)的校准测试需求。因此,利用该解析表达式可以实现对脉冲激光测距误差的有效评估,这对于脉冲激光测距测试系统、脉冲激光测距机的设计具有重要的指导意义。     

微波光子技术在电子对抗中的应用

由于光子技术的宽带和低损耗优势,微波光子技术已经在电子对抗领域中尤其是在微波信号的产生、处理、控制及传输等方面引起了强烈关注.着重阐述了微波信号的光子方法产生及处理、光子微波滤波器、光真延时波束形成以及光学A/D模数转换等技术,最后给出了结论.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

大面积航班延误的实时航班延误程度评估研究

为对大面积航班的延误程度进行实时评估,根据航班延误的时空分布特点,从延误时间和延误范围两个角度给出评估指标,建立了航班延误程度实时评估指标体系。采用层次分析法得到各个指标的权重,并在此基础上给出了基于模糊综合评价的航班延误程度实时评估模型。实例的计算结果表明建立的评估模型是可行的。     

中国深空网首次△DOR联合测轨试验分析

通过分析中国深空网首次△DOR（Delta Differential One way Ranging,双差分单向测距）联合测轨试验的干涉测量事后数据,重点从观测量随机精度、闭合时延等方面讨论了国内深空网与国内VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）观测网、国内深空网与国际深空网的联合干涉处理情况,并与ESOC（European Space Operation Center,欧洲空间操作中心）数据处理结果进行了比对.试验结果表明：我国深空网已具备独立或联合开展深空探测器导航测轨的系统支持能力;深空站系统具备高速率数据接收、采集、记录、传输能力,采集数据处理精度优于1 ns;深空网干涉测量信号处理中心具备多体制信号的干涉处理分析能力,其分析精度与ESOC处理精度差异在0.1 ns量级.     

微小推力下小卫星的轨道递推与推力标定

针对采用微小推力进行轨道机动的小卫星,考虑复杂摄动力的基础设计了一种高精度轨道外推和推力在轨标定算法.首先,建立了考虑地球复杂摄动力和微小推力的小卫星轨道动力学模型;然后基于动力学模型,利用变步长龙格库塔算法,设计了对微小推力小卫星进行高精度轨道外推的方法.随后通过无迹卡尔曼滤波器(UKF),设计在轨标定算法,对存在误...     

电离层顶部电子含量对GNSS电离层层析的影响分析

卫星信号射线上的总电子含量(slant total electron content, STEC)是像素基全球卫星导航系统电离层层析(computerized ionospheric tomography, CIT)建模的必要数据来源，但电离层层析通常忽略1 000 km以上的顶部电子含量，为弄清这部分电子含量对层析结果的影响，利用NeQuick2模型计算站星视线上的STEC与其在电离层区域内的STEC比值来改正原始数据，并分别利用改正前后的STEC进行电离层层析。结果显示，电离层顶部电子含量占比约为10%，白天占比略大于黑夜，与测高仪站的数据相比，改正后的均方根值比改正前提高了20%以上；与Swarm卫星提供的电子剖面数据对比，改正后的层析结果精度较改正前提升了19.6%左右，且该方法受地磁扰动影响较为明显。总的来说，利用CIT进行小尺度电离层探测，可较直观地看出，顶部电子含量对层析结果的影响较大，需要采取相应手段予以剔除。