基于多步裁定法评估编队超视距空战效能

提出了评估编队歼击机超视距空战效能的多步裁定法。用损失交换比和剩余飞机数量作为效能指标,将最优火力分配与空空反导弹引入到多步裁定模型中。考虑了电子对抗与飞机生存力,计算了歼击机领先发射概率、空空导弹击毁概率和发射次数。算例表明,领先发射一方超视距空战效能通常较高,滞后发射一方若采用最优火力分配、空空反导弹、电子对抗及提高飞机生存力等措施也可提高超视距空战效能。此模型计算简便,合理有效。     

复合材料MMB试件I-II混合型层间裂纹扩展分析

基于经典层合板理论及双线性黏聚区本构关系，建立了含一般分层裂纹层合板的理论模型，对I-Ⅱ混合型弯曲（MMB）断裂试件进行了裂纹扩展理论分析。提出了一种I-Ⅱ混合型断裂叠加模型，引入I型裂纹分量的刚体转动位移，同时考虑了裂纹长度超过试件半长后中部载荷分量对裂纹扩展的闭合效应，并根据黏聚区力学响应，分段获得了位移函数通解。结合叠加模型的边界条件与连续性条件，分析了MMB试件的裂纹扩展过程，求解获得了载荷-位移曲线。通过与梁模型预测以及试验结果进行对比，验证了本文模型对I-Ⅱ混合型裂纹扩展预测的有效性和准确性，并讨论了初始断裂模式混合比及闭合效应对裂纹扩展过程的影响。结果表明：初始Ⅱ型裂纹比重较大时，中部载荷的闭合效应更为明显，可能出现I型裂纹完全闭合的情况；裂纹扩展过程中，当裂纹长度小于试件半长时，断裂混合比基本保持常数；当裂纹扩展超过试件半长后，闭合效应明显，混合裂纹形式逐渐向单一型断裂模式退化。     

Shape control of spacecraft formation using a virtual spring-damper mesh

This paper derives a distance-based formation control method to maintain the desired formation shape for spacecraft in a gravitational potential field. The method is an analogy of a vir-tual spring-damper mesh. Spacecraft are connected virtually by spring-damper pairs. Convergence analysis is performed using the energy method. Approximate expressions for the distance errors and control accelerations at steady state are derived by using algebraic graph representations and results of graph rigidity. Analytical results indicate that if the underlying graph of the mesh is rigid, the convergence to a static shape is assured, and higher formation control precision can be achieved by increasing the elastic coefficient without increasing the control accelerations. A numerical exam-ple of spacecraft formation in low Earth orbit confirms the theoretical analysis and shows that the desired formation shape can be well achieved using the presented method, whereas the orientation of the formation can be kept pointing to the center of the Earth by the gravity gradient. The method is decentralized, and uses only relative measurement information. Constructing a distributed virtual structure in space can be the general application area. The proposed method can serve as an active shape control law for the spacecraft formations using propellantless internal forces.     

航空术语的构词分析

以全国科学技术名词审定委员会公布的"航空科学技术名词"为览本,对航空术语的词性和构型进行分析,通过举例作出了某些详述,并推导出对外来术语的吸纳方法和原则。     

受压正交异性矩形分层的屈曲和后屈曲

 一、引言 为了给飞行器的设计提供理论依据,采用力法分析了不同材料的受压固支、简支正交异性矩形分层模型的屈曲和后屈曲,把一组非线性偏微分方程构成的边值问题化为求解一组非线性代数方程,进而用梯度法解之,最后给出有关的计算结果,并说明了支承条件的影响。     

相对测量在编队卫星自主定轨中的应用

针对编队卫星自主定轨问题进行了研究,设计了一种完全不依赖于地面站和GPS系统的自主导航方案。利用星间测量信息进行卫星编队相对轨道状态的自主确定;并在利用磁强计进行卫星绝对轨道自主确定的基础上,引入星间测量信息提高绝对定轨精度;设计扩展卡尔曼滤波器进行卫星编队轨道状态估计,数学仿真结果验证了这种导航方案和算法的有效性。     

Deep Impact: A Large-Scale Active Experiment on a Cometary Nucleus

The Deep Impact mission will provide the first data on the interior of a cometary nucleus and a comparison of those data with data on the surface. Two spacecraft, an impactor and a flyby spacecraft, will arrive at comet 9P/Tempel 1 on 4 July 2005 to create and observe the formation and final properties of a large crater that is predicted to be approximately 30-m deep with the dimensions of a football stadium. The flyby and impactor instruments will yield images and near infrared spectra (1–5 μm) of the surface at unprecedented spatial resolutions both before and after the impact of a 350-kg spacecraft at 10.2 km/s. These data will provide unique information on the structure of the nucleus near the surface and its chemical composition. They will also used to interpret the evolutionary effects on remote sensing data and will indicate how those data can be used to better constrain conditions in the early solar system.     

无人机编队飞行控制器设计

主要对两架无人机斜线编队控制进行研究,建立了相应的数学模型,并基于PI控制律分别设计了x,y两个方向的控制器,利用解析和数值计算两种方法解算.仿真结果表明,设计的控制器可以控制僚机跟随长机机动,保持原有的相对位置和姿态.     

机载聚束式合成孔径雷达的成象处理设计

针对机载聚束式合成孔径雷达工作模式可在小目标范围内实现高分辨力成象的特点，提出了一种以解线性调频技术为核心的，适于聚束式ＳＡＲ成象的灵活高效的信号处理方法和流程。     

复合材料层板一维穿透脱层的能量释放率

建立了含穿透脱层的正交各向异性层合板在承受面内轴向压缩载荷作用时的一维分析模型。在一阶剪切层板理论的基础上,利用一维可动边界变分问题,结合断裂力学知识导出了脱层扩展的能量释放率G及其分量G_Ⅰ、G_Ⅱ的表达式,且验证了该方法的正确性。通过计算,讨论了外载和脱层长度对能量释放率的影响。