红外光谱发射率测试方法的研究

论述了用傅立叶红外光谱仪和黑体辐射源、试样加热器、温度控制系统、辅助光路系统等构成的测试装置进行红外光谱发射率测量的方法 ,给出了测试结果 ,讨论了常温下进行红外光谱发射率测量的方法。     

航天火工装置可靠性设计、试验、评估实用方法与程序

鉴于火工装置研制现在缺少一套完整的可靠性设计、试验、评估方法与程序，文章从实际使用角度出发，总结了一套方法和程序，主要介绍火工装置可靠性模型，各个环节的可靠性设计、试验方法，并叙述了现型号使用的可靠性评估方法和程序。     

频谱分析仪使用中有关回波损耗的问题

介绍测试射频信号频谱时，减小测试误差的方法，分析了回波损耗的各种情况。     

考虑不确定性的复合材料加筋壁板后屈曲分析模型验证方法

复合材料加筋壁板在结构轻量化设计中，由于材料组分、几何尺寸具有不确定性，导致了壁板结构在服役条件下承载特性的不确定性。针对上述问题，提出了一种考虑参数不确定性的复合材料加筋壁板后屈曲模型验证方法。首先基于正交试验设计方法进行了不确定性参数的显著性分析，然后采用Kriging模型构建了能够表征后屈曲特性的代理模型，利用蒙特卡洛随机模拟获得加筋壁板后屈曲载荷概率分布，最后通过壁板结构在典型承载条件下的力学实验数据验证了分析模型的准确性。该分析方法对于壁板件在实际工程中的应用具有一定指导意义。     

End-to-end validation process for the INTA-Nanosat-1B Attitude Control System

This paper describes the end-to-end validation process for the Attitude Control Subsystem (ACS) of the satellite INTA-NanoSat-1B (NS-1B). This satellite was launched on July 2009 and it has been fully operative since then. The development of its ACS modules required an exhaustive integration and a system-level validation program. Some of the tests were centred on the validation of the drivers of sensors and actuators and were carried out over the flying model of the satellite. Others, more complex, constituted end-to-end tests where the concurrency of modules, the real-time control requirements and even the well-formedness of the telemetry data were verified. This work presents an incremental and highly automatised way for performing the ACS validation program based on two development suites and an end-to-end validation environment. The validation environment combines a Flat Satellite (FlatSat) configuration and a real-time emulator working in closed-loop. The FlatSat is built using the NS-1B Qualification Model (QM) hardware and it can run a complete version of the on-board software with the ACS modules fully integrated. The real-time emulator, running on an industrial PC, samples the actuation signals and emulates the sensors signals to close the control loop with the FlatSat. This validation environment constitutes a low-cost alternative to the classical three axes tilt table, with the advantage of being easily configured for working under specific orbit conditions, in accordance with any of the selected tests. The approach has been successfully applied to the NS-1B in order to verify different ACS modes under multiple orbit scenarios, providing an exhaustive coverage and reducing the risk of eventual errors during the satellite's lifetime. The strategy was applied also during the validation of the maintenance and reconfiguration procedures required once the satellite was launched. This paper describes in detail the complete ACS validation process that was performed and it shows the most relevant errors detected and fixed during testing. Finally it summarises some of the most significant conclusions.     

竖管-叶片式表面张力管理装置的设计与分析

介绍了一种推进剂管理装置（PMD），竖管-叶片式表面张力管理装置的方案和结构，讨论了该管理装置设计中的竖管、叶片和收集通道的设计等方面问题，并通过对该管理装置性能进行设计分析和计算，验证了该管理装置蓄留和供应推进剂的性能。     

CCD遥感图像的实时压缩系统设计与实现

文章研究高速CCD遥感图像压缩的系统设计与实现。与其它图像数据相比,CCD遥感图像数据具有高速率、高量化位数的特点。针对CCD相机输出图像的数据特点,基于ADV212压缩芯片,提出了一种高速CCD遥感图像压缩系统的构架方案。该方案采用FPGA+ADV212+SRAM的硬件结构方式,以FPGA作为系统的主控,SRAM完成输入数据的缓存处理,ADV212完成图像数据的高效压缩处理。文章最后构建了压缩系统的实验验证平台,对系统的性能进行了实验验证。试验结果表明,文中提出的系统压缩方案,压缩前后图像品质没有明显差异,可以满足遥感图像压缩系统的实时处理要求。     

轴对称羽流流场数值模拟和实验验证

针对在轨航天器羽流效应对航天器整体寿命的影响,在"DFH"系列卫星姿控发动机喷管羽流实验研究的基础上,建立喷管的轴对称模型,选取矩形计算区域,设定一定的边界条件和计算条件,采用轴对称单组分直接模拟蒙特卡罗(DSMC,Direct Simulation Monte Carlo)方法对相应实验状态的羽流流场进行数值模拟研究.通过对比数值模拟结果和实验测量结果,表明DSMC数值模拟羽流流场的计算结果符合实际流动规律,实验验证了所编制的轴对称DSMC数值模拟程序的正确性和有效性.      

航天器环境模拟试验的计量保障

文章分析了中国空间技术研究院航天器环境模拟试验的计量保障现状和存在的问题,介绍了北京东方计量测试研究所的计量保障能力,对航天器环境模拟试验计量保障工作的发展提出了具体建议。