太阳电池阵列模拟器计量测试方法研究

对太阳电池阵列模拟器(SAS)的设计原理和技术要求进行了分析,并根据分析结果对太阳电池阵列模拟器计量测试方法进行了研究。     

多孔介质隔热材料中的辐射热传递分析

新型的多孔材料以其重量轻、强度高备受航天工程设计人员的亲睐,尤其是作为隔热材料使用,可以说是航天工程热防护系统的热门材料.多孔介质在辐射热传递方面具有吸收发射和散射的功能,这些功能在其接受外来热流的作用下,于内部达到热能量平衡,求解这一平衡方程就可以求出辐射热流在材料中的分布.由于求解这一方程的困难,许多学者对材料特性...     

连续推力机动轨道优化设计的贝塞尔曲线法

提出一种基于贝塞尔曲线的平面机动轨道设计方法。该方法将贝塞尔曲线方程与轨道形状方程相结合，利用得到的复合函数作为轨道方程来对机动轨道进行数学描述；通过约束条件获得可行的机动轨道族，由控制点设计给出具体的优化变量，将累积速度增量作为优化指标函数；并利用优化算法完成参数优化，从而得到最优机动轨道。最后针对设计的机动轨道推力峰值较大的问题，进一步提出了分段贝塞尔曲线法，在降低推力峰值的同时，可进一步降低燃料消耗，并在平面机动转移轨道设计的基础上，通过梯度下降对自由控制点进行修正，解决了考虑时间约束的平面轨道交会问题。     

A strategic “viewfinder” for SETI research

One of the most important reasons why unsuccessful results have been obtained so far by the SETI Project is due to the fact that no sure targets to aim at have been available up-to the present state of research. All-sky surveys, even if very accurate and complete, might result to be time-consuming. SETI needs at least one effective “viewfinder” in order that a true targeted research is carried out with a possible success. The best foundation to get this can be identified with the search for the evidence of extraterrestrial astro-engineering activity in form of the Dyson spheres predicted by theory. The existence of such stellar objects can be ascertained by finding the evidence of two main signatures in stars of solar spectral type: infrared excess and anomalous light curves due to transiting artificial objects. These are probably the most powerful viewfinders in order to allow SETI techniques for intelligent signal search to be aimed at more appropriate targets. This paper is not intended to be a research paper but rather a review paper whose goal is not to present calculations and/or operational research but rather to be a research proposal for a more focused research in SETI just using Dyson Spheres as crucial markers.     

舰载机增升装置对薄翼型升力系数的影响研究

描述了增升装置在提高舰载机薄翼型升力系数方面的作用,观察到大偏角前缘襟翼小迎角时对翼型升力曲线的影响,并通过与试验现象对比,初步探讨了非线性作用形成的可能机理。利用数值模拟方法,通过有限元计算软件对相同流场中多种增升装置的升力系数进行了模拟与比较,从而达到合理设计舰载战机翼型的目的。CFD计算结果表明,所设计的二维多段翼型有良好的气动特性,升力系数得到提高,具有较好的增升效果。     

关于多项式系数二阶线性微分方程的可积性问题

主要探讨了实域上当ｇ（ｘ），ｈ（ｘ）是多基式，二阶变系数线性微分方程ｙ″＋ｇ（ｘ）ｙ‘＋ｈ（ｘ）ｙ＝０的可积性问题，沿袭了文」１「中算子矩阵理论的思想，得到了该方程要积的充分必要条件，且给出可积时的通解公式，并举例指出了文中「５，６」中收集的许多可积的二阶线性微分方程，其中相应的多项式系数的部分均是本文的特例。     

水系统装置扬程的计算及泵的选型分析

为了提高水系统中水泵的实际运行效率和扬程利用率,降低发动机试验成本,减少能量浪费,以某型发动机台架试验水系统为研究对象,综合考虑了装置静扬程、管路的各种局部损失和沿程损失开展装置扬程的计算。同时根据水系统所需的装置扬程、流量及其变化规律,从泵的参数及其特性曲线入手,进行泵的选型分析,确定合适的泵的类型、台数及连接方式。通过水系统装置扬程的计算和泵的选型分析,结合泵带来的能效利用、工程投入和运行费用等因素,可在满足发动机试验需要的同时实现经济利益最大化,为今后类似水系统工程的设计提供借鉴和指导。     

飞机锁类机构性能退化可靠性分析方法综述

随着航空航天装备的快速发展,对飞行器装备的可靠性要求逐渐提高,飞机锁类机构的可靠性对飞机起降的安全至关重要。以飞机舱门锁机构为研究对象,首先通过文献调研了大量舱门锁机构并分析了锁机构的特点和失效模式,阐述了锁机构的工作原理。其次综述了锁机构失效机理建模、机构渐变损伤的研究现状以及目前存在的问题,分析了国内外有关锁机构可靠性的研究现状;并针对多连杆机构可靠性分析和锁机构可靠性分析进行了分类梳理。最后对锁机构的可靠性分析研究思路进行总结,并对目前复杂锁机构的可靠性分析存在的问题及其研究趋势进行了展望。     

SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.     

有理Bézier曲线的权因子计算

给出了有理Bézier曲线形状作定量修改时的权因子的计算公式,并且证明了权因子选取的唯一性。