SolidWorks二次开发在燃面计算中的应用

以SolidWorks二次开发接口为基础,探讨了参数化设计在固体火箭发动机装药燃面计算中的应用.通过不同的药柱建模方法实现了固体药柱的装药计算,发展了一种更为简单准确的燃面计算方法.计算结果表明,理论计算和试验结果吻合得较好,能够较好地模拟固体药柱的燃烧过程,可以满足工程计算上的需要,为固体装药的燃面计算提供了新的思路和方法.      

基于一致性预处理技术的作业车间调度算法研究

为降低CSP调度算法的计算复杂度和减少搜索过程中回溯发生概率,采用一致性预处理技术来预先修剪和过滤搜索空间。仿真实验证明:两种方法的综合运用可以显著提高CSP调度算法的搜索效率,从而为CSP调度算法求解大规模作业车间调度问题提供可能。     

一种高效的基于可靠性的多学科设计优化方法(英文)

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.     

反舰导弹导引头ATE装订电路的设计及应用

阐述了反舰导弹导引头“闭锁时间”装订精度和“距选波门”装订精度在导弹战术技术使用中的重要性。     

基于虚拟慢时间的双基地ISAR成像算法

针对双基地角时变引起的逆合孔径雷达（ISAR）图像畸变和散焦问题，提出了一种基于虚拟慢时间的成像算法。首先，分析了双基地角时变对ISAR成像的影响机理。然后，基于图像对比度最大准则估计等效旋转中心位置，完成初次相位补偿。最后，通过虚拟慢时间构建基于非均匀虚拟采样的补偿系数矩阵，并通过方位向非均匀傅里叶变换得到目标的ISAR像。算法基于图像对比度最大准则解决等效旋转中心位置估计问题，通过虚拟慢时间消除转动相位项的高次项影响，利用非均匀傅里叶变换解决随机虚拟采样的谱估计问题。理论分析和仿真结果验证了算法的有效性和鲁棒性。     

基于多特征融合的航天器锂电池健康评估技术

传统的航天器蓄电池可靠性试验按照最大放电深度进行定额充放电，所构建的失效模型用于支撑航天器总体可靠性设计，不能用于在轨锂离子蓄电池健康评估任务；航天器在蓄电池遥测的采样率、精度、样本量方面无法与民用领域相比，基于高采样、大样本的民用蓄电池健康估计方法也不适用于在轨锂离子蓄电池健康评估。针对该问题，从在轨航天器蓄电池数据特性出发，挖掘在轨状态下所能提取的退化特征，并采用多特征综合评价方法，设计了一种基于多特征融合的在轨锂离子蓄电池健康评估方法，实现了在轨蓄电池放电内阻、同放电深度下的终端电压、恒压充电时间3项退化特征融合的健康量化评估，应用于某型号卫星的在轨监测与健康评估，具有良好的工程实用性，可作为国内航天器健康评估技术的参考。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.     

Hypersonic vehicle aerodynamic design using modified sequential approximate optimization

Hypersonic vehicles are receiving increased attention within the aerospace community due to their high cruise speed and long-range capabilities. In this paper, a modified Sequential Approximate Optimization method is proposed for an optimized aerodynamic design of a hypersonic vehicle. As part of this approach, a constrained experimental design method is developed to handle the constraints more efficiently. A radial basis function is used to surrogate time-consuming CFD analysis. An efficient and more robust numerical mesh morphing scheme for the hypersonic vehicle is developed for the generation of high-quality meshes. Within this paper, a novel adaptive infilling strategy is proposed which uses an inaccurate search technique coupled with an elite archive. This allows the location of a more promising sample region and hence improves the surrogate accuracy, thereby further enhancing the optimization efficiency. A hypersonic vehicle aerodynamic design problem is solved using the proposed approach and satisfactory results are obtained at much lower computational costs. The lift-to-drag ratio is increased by 23.8% when compared with the base configuration while also satisfying the volume and lift constraints. The pressure and Mach contours have been compared with those of the base configuration and the results demonstrate the strength of the optimized configuration. The modified sequential approximate optimization for designing an improved hypersonic vehicle is worth referencing in future work.     

直升机驾驶员模型研究

主要阐述直升机驾驶员各特征参数的确定方法，导出了各种不同形式模型参数的换算公式以及模型参数与驾驶员评价等级之间的关系。本文的方法经过多种直升机飞行试验数据的验证是查行的，可用于各种直升机的闭环分析。