双组元落压推进系统混合比控制方法

双组元落压推进系统以其简单、高可靠、高比冲的特点在空间飞行器上逐渐得到应用。由于双组元落压推进系统压力和推进剂流量存在明显的变化,其混合比控制方法与双组元恒压推进系统存在显著的区别。本文分析了双组元落压推进系统混合比的影响因素,构建了混合比计算模型,提出了基于初始贮箱压力控制混合比的方法,并通过推进系统热试车验证了混合比控制方法的有效性。试验结果表明:通过控制初始贮箱压差不超过0.05 MPa,可将系统混合比偏差控制在不大于1.8%的指标范围内。     

Space weather service activities and initiatives at LAMP (Argentinean Space Weather Laboratory group)

Since more than one decade ago, several institutions started to offer a large variety of Operative Space Weather (SWx) products. This is of major importance because Space Weather events can affect aviation communications, global positioning systems, grid electric power, satellite technologies, and human health in space. The scientific potential on solar-terrestrial physics in Argentina motivated the creation of an interdisciplinary Laboratory of Space Weather in Argentina. The Argentinean Space Weather Laboratory (in Spanish ‘Laboratorio Argentino de Meteorología del esPacio’, LAMP) was initiated in 2016, and it carries out daily monitoring of real-time information (space and ground-based instruments) on Space Weather. The information is synthesized on a weekly bulletin as a summary of the Space Weather conditions, and it is posted on a website (spaceweather.at.fcen.uba.ar). The analyzed information includes own data and of other centers that offer them publicly, and it is also analyzed and discussed later on, during monthly briefings. In particular, one of the regional products that is included in the briefing discussions and it was developed by LAMP in collaboration with INPE-EMBRACE, involves Vertical Total Electron Content (VTEC) maps in the Argentinean region. LAMP set up a Space Weather Laboratory in the Antarctic peninsula, in the Argentine Marambio base, where a Water Cherenkov radiation Detector (WCD) was installed during the Argentinean Antarctic campaign (January-March of 2019). This detector is the southern node of a Latin American Collaboration (LAGO, Latin American Giant Observatory), which is a network of WCDs installed throughout more than 10 Latin American countries.     

传动比和转速对永磁齿轮传动特性的影响研究

介绍了一种径向调制永磁齿轮，运用有限元技术，通过变更仿真条件中的传动比和转速，并对仿真结果中的输出转矩和传动效率进行分析，从而获得传动比和转速对输出转矩和传动效率的影响规律。结果表明，随着传动比的增大，输出转矩呈二次曲线规律变化，而传动效率则呈减小趋势；相同传动比下，随着主动转子转速的增大，输出转矩和传动效率均呈减小趋势；提出了以传动效率〖WTBX〗η〖WTBZ〗为目标值的等效率曲线概念，得到了η=90%时的等效率曲线i~n₁（i和n₁分别代表传动比和主动转子转速），当n₁和i的交点位于等效率曲线下方时，即可满足η>90%。     

境内旅行社赴台直航旅游产品经营策略研究

大陆地区赴台湾直飞航班开通后，赴台旅游人数增长很快。但由于市场竞争的加剧和规模效应的体现，导致旅游价格大幅下降，使境内旅行社台湾游产品的游客人均利润额也出现下降。为了进一步扩大赴台旅游市场，提高人均利润额，境内旅行社有必要改变赴台直航旅游产品的经营策略。从丰富台湾旅游产品、提高赴台旅游服务质量、改善成本控制、采取多样的价格策略等几个方面对境内旅行社经营策略的优化进行了详细阐述。     

Study on effects of thickness on airfoil-stall at low Reynolds numbers by cusp-catastrophic model based on GA(W)-1 airfoil

The phenomena of an airfoil stall present the behaviors of catastrophe and hysteresis at low Reynolds numbers. Numerical simulation results of two-dimensional airfoil GA(W)-1 show that the width of the hysteresis loop of airfoil stall will gradually decrease and even disappear with the decrease of thickness ratio. These nonlinear characteristics are in accordance with the topological features of the cusp catastrophic model. According to the topological invariant principle, a novel topological mapping method is developed to establish the mapping relationship between cusp catastrophic model and stall characteristics of the airfoil, then the effect of thickness ratio on airfoil stall is successfully described quantitatively by cusp catastrophic model. Further, based on the established topological mapping relationship, combined with the mean flow field of the airfoil stall, potential function approach of cusp catastrophic model is first introduced to interpret the catastrophe and hysteresis of the airfoil stall, and it is found that as the thickness ratio decreases, the system's maximal potential energy gradually disappears, and the short separation bubble at the leading edge of the airfoil changes to long separation bubble, so the airfoil stall changes from a bistable system to a monostable system.     

Assessment of space debris collisions against spacecraft with deorbit devices

Deorbit methods have been employed to remove space debris from orbit. One of these methods is to utilize atmospheric drag. In this method, a membrane loaded into the spacecraft is expanded to increase atmospheric drag. Although this method works without requiring fuel, it has the disadvantage of a high risk of collision with other debris owing to its larger area. Area-time product and energy-to-mass ratio have been used as indices to evaluate the risk of collisions between spacecraft and debris. However, the evaluation criteria were uncertain because these two indices are independent. In this paper, we propose a new evaluation index, single-sheet collision factor (SSCF), that comprehensively evaluates the collision risk based on experiments simulating debris collisions. As a result of the hypervelocity collision experiment, we found that the penetration-area mass of the spacecraft affects the severity of debris collisions. In this paper, the product of the exterior-wall thickness, the exterior-wall density, and the space debris cross-sectional area defines the penetration-area mass of the spacecraft. Furthermore, we compare and evaluate various deorbit methods using SSCF. The comparison showed that the penetration-area mass of the SSCF could be quantitatively determined for the debris-collision severity due to difference in structural materials of spacecraft. SSCF will be used to create rules for space-environment conservation with the expansion of the space-development market.     

一种新的红外背景抑制滤波算法

结合保护带和Dempster-Shafer(D-S)证据理论,提出了一种新的红外背景抑制滤波算法。首先分析了小目标的特性,论证了小目标在局部背景中呈现出极值性的条件和可能性,并在此基础上采用D-S证据理论计算最佳滤波尺寸。然后在最佳滤波尺寸下,根据保护带的思想进行背景抑制滤波,该算法能够适用不同尺寸的小目标。以全局信噪比增益、局部信噪比增益和背景抑制系数作为算法性能评价标准,实验结果表明,在低信噪比的情况下该算法对典型的不同红外背景具有良好的适用性,能够有效地抑制红外背景并增强目标信息。     

通道高度对受限长通道流动特性的影响

为更好地掌握涡轮叶片错排射流冲击受限长通道内的流动结构,了解横流对射流作用的影响,获取沿流动方向通道内的流动特性,对包含12个射流孔和1个出流孔的受限通道流场进行了详细的测量,着重研究受限通道和出流孔内的流动特性,同时获得沿通道密流比、侧壁静压以及孔流量系数的变化规律。实验结果表明:通道高度主导着通道和出流孔内的流动特性,但其影响随着通道高度的进一步增加而减弱;通道高度的增加削弱了横流强度,但也增加了射流流程,使其在下游位置无法对靶面形成有效冲击;随通道高度的增加,沿通道流量分配趋于均匀,密流比呈线性分布,沿程压降趋缓,出流孔流量系数提高。     

仿生负泊松比拉胀内凹蜂窝结构耐撞性

基于自然界微观生物结构的启发,设计了1种新型仿生负泊松比拉胀内凹蜂窝（ARH）,并对其耐撞性能进行数值模拟。结合竹子的梯度结构和椰子树的同心胞结构,提出了2种单向梯度和2种双向梯度同心ARH结构。梯度同心结构设计方法不仅可诱导结构渐进的冲击行为,而且因其较低的等效壁厚可改善其比吸能能力。与传统ARH结构相比,对仿生ARH结构的平台应力和吸能特性进行研究,并分析耦合压溃变形模式、收缩变形机理和负泊松比效应等来揭示结构的增强机理。结果表明：预测的耐撞响应和压溃变形模式与参考结果相似;相对传统的ARH,梯度同心ARH有更高的平台应力和比吸能,且平台应力的上升和压溃变形模式均呈梯度变化;梯度方向对压溃变形模式和各层变形顺序影响较大;双向梯度同心ARH比单向梯度同心ARH因耦合变形具有更高的吸能能力;同心胞数对蜂窝各层的收缩变形有较大影响。     

基于深度强化学习的固定翼无人机编队协调控制方法

由于运动学的复杂性和环境的动态性,控制一组无人机遂行任务目前仍面临较大挑战。首先,以固定翼无人机为研究对象,考虑复杂动态环境的随机性和不确定性,提出了基于无模型深度强化学习的无人机编队协调控制方法。然后,为平衡探索和利用,将ε-greedy策略与模仿策略相结合,提出了ε-imitation动作选择策略;结合双重Q学习和竞争架构对DQN（Deep Q-Network）算法进行改进,提出了ID3QN（Imitative Dueling Double Deep Q-Network）算法以提高算法的学习效率。最后,构建高保真半实物仿真系统进行硬件在环仿真飞行实验,验证了所提算法的适应性和实用性。