薄壁圆筒结构工作变形的连续扫描激光测振方法

提出了一种薄壁圆筒结构外表面工作变形(ODS)连续扫描激光多普勒振动测试方法。将旋转平台与电动机控制引入激光连续扫描,发展了一种与激光连续扫描路径相匹配的电动机控制算法,使连续扫描激光振动测试应用于薄壁圆筒结构;对试验件进行了薄壁圆筒结构外表面激光连续扫描测试,获取了500 Hz内的前5阶模态,结果表明:该测试方法与商用激光离散点扫描测试模态振型的相关性在0.96以上,验证了薄壁圆筒连续扫描激光多普勒振动测试的可行性与准确性。连续扫描激光测试的效率高、测点密集,对进一步工程应用具有指导意义和实用价值。     

某型航空活塞发动机排气门积铅机理

针对某型航空活塞发动机在含铅汽油条件下因排气门积铅而出现严重的气缸压缩性衰减问题,通过对排气门上沉积物的微观形貌及成分分析,结合该型发动机的结构设计和实际运行环境分析这种排气门沉积物的形成机理.研究表明:空中慢车时排气门运行温度过低是导致污染物在排气门上沉积的根本原因,而空中慢车时的螺旋桨风车因素和该型发动机燃油系统设计特性是导致排气门运行温度过低的主要原因。据此提出将螺旋桨风车转速降低200 r/min和小功率调贫控制排气温度在427 ℃以上等提高气门运行温度的方案,经实际运行测试有效。     

基于惯性传感器的免对准动作的人体上肢运动捕捉方法

基于惯性传感器的人体运动捕捉系统,通常在进行运动捕捉前需要执行特定的标准动作来完成对准,以获得IMU坐标系相对肢体坐标系的姿态。运动受限用户（如偏瘫患者）无法完成一些标准动作,而运动正常用户,也不能保证均能正确执行标准动作,从而导致人体运动捕捉误差。为了克服现有方法的不足,本文研究了一种基于惯性传感器的免对准动作的人体上肢运动捕捉方法,该方法无需执行特定对准动作,佩戴IMU后即可直接进行运动捕捉。通过与“T-Pose”静态对准方案比较,验证了免对准动作方法的有效性,并且基于OpenGL的虚拟人体模型进行了上肢运动捕捉实验。实验表明,所提出的方法简便有效,在无须执行标准对准动作的情况下仍具有较好的人体运动捕捉效果,适合偏瘫患者等行动受限的用户使用。     

Unscented粒子滤波在静基座捷联惯导系统大方位失准角初始对准中的应用研究

 静基座大方位失准角的捷联惯导系统误差方程是非线性的,Unscented粒子滤波从非线性系统状态向量概率分布出发,结合Unscented卡尔曼滤波和粒子滤波的特点,无需对非线性系统模型进行处理而能达到较高的滤波精度。本文对Unscented粒子滤波进行了研究,并结合重采样算法,运用于捷联惯导系统静基座大方位失准角初始对准中,计算结果验证了该方法的有效性与优越性。     

Dynamic Response Analysis of Bird Strike on Aircraft Windshield Based on Damage-modified Nonlinear Viscoelastic Constitutive Relation

Damage-modified nonlinear viscoelastic constitutive equation and failure criterion are introduced and the three-dimensional incremental forms are deduced based on the updated Lagrangian approach. A simple tensile test model and a split Hopkinson pressure bar model are built to verify the accuracy of the subroutine implemented within the non-linear finite element program LS-DYNA. A numerical model of bird strike on windshield is established to study the responses of windshield under three different bird velocities at three sites. The bird is represented by a cylinder with a hemisphere at each end and the contact-impact coupling algorithm is used in this study. It is found that the implemented subroutine can properly describe the mechanical behavior of polymethyl methacrylate under low and high strain rates and large deformation, and can be used validly.     

多通道投影图像的几何自动拼接技术

以低端摄像头产品为测量元件构造了实用的可扩展的多通道投影图像自动拼接系统;利用二次校准方法细化求解一致性矩阵,在投影屏幕上实现了多通道投影图像间的几何无缝拼接;特征图案的正确选择和二次校准方法最大限度地降低了摄像头性能对校准精度的影响;在满足相邻投影图像有重叠区域和摄像头能拍摄到重叠区域两个基本条件时,系统可实现自动拼接校准.实验表明,二次校准方法使校准时间明显缩短,使校准精度达到了亚像素级;低端摄像头、高效率的特征提取方法和一致性矩阵求解算法使系统扩展成本大大降低.      

An optimal beam alignment method for large-scale distributed space surveillance radar system

Large-scale distributed space surveillance radar is a very important ground-based equipment to maintain a complete catalogue for Low Earth Orbit (LEO) space debris. However, due to the thousands of kilometers distance between each sites of the distributed radar system, how to optimally implement the Transmitting/Receiving (T/R) beams alignment in a great space using the narrow beam, which proposed a special and considerable technical challenge in the space surveillance area. According to the common coordinate transformation model and the radar beam space model, we presented a two dimensional projection algorithm for T/R beam using the direction angles, which could visually describe and assess the beam alignment performance. Subsequently, the optimal mathematical models for the orientation angle of the antenna array, the site location and the T/R beam coverage are constructed, and also the beam alignment parameters are precisely solved. At last, we conducted the optimal beam alignment experiments base on the site parameters of Air Force Space Surveillance System (AFSSS). The simulation results demonstrate the correctness and effectiveness of our novel method, which can significantly stimulate the construction for the LEO space debris surveillance equipment.     

主子惯导坐标系失调动态估计补偿方法研究

本文研究了船体静态变形角、动态变形角引起的主子惯导坐标系失调角动态补偿方法。研究表明：速度加姿态匹配能够在线估计补偿船体静态变形引起的主子惯导坐标系失调角,角速度匹配传递对准方法能够在线估计补偿船体静态变形、动态变形引起的主子惯导坐标系失调角,两种匹配传递对准方法适用条件均受海况环境影响。     

惯性/里程计组合导航无地标行进中自主对准

载车行进中自主对准可有效缩短机动前准备时间,提高姿态对准精度以及对准过程中无地标自主定位精度是关键。本文提出一种里程计辅助捷联惯导系统行进中对准算法,推导了行进中精对准滤波模型以及对准过程中无地标自主定位算法。为缩短对准时间、减小由于航向角误差未收敛时造成的定位误差,利用回溯法将粗对准过程存储数据用于精对准过程,且回溯法仅需存储少量数据适合于工程应用。车载实测数据分析表明算法可同时实现行进中自主对准与对准过程中无地标自主定位,有效提高了载车快速机动能力,航向角对准精度优于1 mil,对准过程中无地标自主定位精度优于0.3%行程。     

Research on uncertainty in measurement assisted alignment in aircraft assembly

Operations in assembling and joining large size aircraft components are changed to novel digital and flexible ways by digital measurement assisted alignment.Positions and orientations（P＆O）of aligned components are critical characters which assure geometrical positions and relationships of those components.Therefore,evaluating the P＆O of a component is considered necessary and critical for ensuring accuracy in aircraft assembly.Uncertainty of position and orientation（U-P＆O）,as a part of the evaluating result of P＆O,needs to be given for ensuring the integrity and credibility of the result;furthermore,U-P＆O is necessary for error tracing and quality evaluating of measurement assisted aircraft assembly.However,current research mainly focuses on the process integration of measurement with assembly,and usually ignores the uncertainty of measured result and its influence on quality evaluation.This paper focuses on the expression,analysis,and application of U-P＆O in measurement assisted alignment.The geometrical and algebraical connotations of U-P＆O are presented.Then,an analytical algorithm for evaluating the multi-dimensional U-P＆O is given,and the effect factors and characteristics of U-P＆O are discussed.Finally,U-P＆O is used to evaluate alignment in aircraft assembly for quality evaluating and improving.Cases are introduced with the methodology.