可逆循环矩阵逆矩阵的同步求法

本文在循环矩阵性质的基础上,利用初等行变换和列变换给出了可逆循环矩阵逆矩阵的同步求法、算法及数值例子,同时提出了一种判定循环矩阵不可逆的方法。     

小型二冲程航空发动机燃烧循环变动研究

利用峰值压力、最大压力上升率、燃烧百分率以及它们各自所对应的曲轴转角和相空间重构投影法评价小型二冲程航空发动机的燃烧循环变动.通过比较,认为燃烧百分率所对应的曲轴转角能更好地表征发动机的燃烧循环变动.针对发动机在中速和不同负荷条件下的燃烧循环变动分析,结果表明随负荷的加大,缸内燃烧的循环变动会变小,认为是负荷加大,气体...     

周期对称性在叶盘结构瞬态响应求解中的应用

研究了利用结构周期对称性计算叶盘结构瞬态响应的方法.首先用ANSYS得到扩充扇区的刚度和质量矩阵,通过周期对称边界上节点的对应关系得到扩充扇区到基本扇区的转换矩阵.利用叶盘结构中各扇区所受载荷的特点,得到任意时刻载荷的空间分布,并对其进行Fourier展开,以得到周期对称模型的载荷.采用Newmark法进行时域积分,利...     

空气循环制冷游离水与空气分离方法的探讨与研究

本文分析了空气循环制冷技术的原理以及技术应用于地面设备的特点，针对外界高温、高湿的大气条件下制冷过程中游离水与空气的分离问题给出了新的有效的解决办法。     

循环冗余码的软件实现方法及应注意的问题

】介绍了ＣＲＣ码并行算法的软件实现和串行算法的硬件实现方法，同时比较它们的差异，并指出了实践中应注意的问题     

用于失谐叶盘动力学特性分析的减缩计算方法

提出了一种用于失谐叶盘动力学特性分析的减缩计算方法.该方法采用基于周期对称的谐波平衡法,建立非线性的迭代方程,能够基于单扇区的矩阵求解整个失谐叶盘的强迫响应,且不存在任何截断误差,因而效率高于部件模态综合法但精度并不降低.从周期对称结构理论出发给出了方法原理的数学推导,在此基础上通过一个失谐叶盘有限元模型算例对该方法的效率与精度进行了讨论.结果表明:相较部件模态综合法,周期对称谐波平衡法矩阵维度减小59.5%,计算复杂度减少93.4%,计算时间节省57.4%.     

A star identification algorithm based on radial and dynamic cyclic features of star pattern

A full-sky star identification algorithm based on radial and dynamic cyclic patterns is presented with the aim of solving the “lost-in-space” problem. The dynamic cyclic pattern match is applied with a maximum cumulate comparison method to identify sensor-catalog pairings in initial match, which substantially eliminates the effects of the star position noise, magnitude noise, and false stars. After initial match pairings of stars are obtained, a chain part extension technique is employed to quickly search for the longest match chain as the final result. Experimental results indicate that the proposed algorithm is highly robust to star position noise, magnitude noise and false stars. In a series of simulations, the identification rate of the algorithm is 97.50% with 2.0 pixels star position noise, 96.90% with 0.4 Mv star magnitude noise and 95.30% with four false stars respectively. Moreover, the algorithm achieves an identification rate of 58.08% when only six stars are in the field of view.     

O2 evolution and cyclic electron flow around photosystem I in long-term ground batch culture of Euglena gracilis

Based on the purpose of better exploring the function of green producers in the closed aquatic biological life support system, the condition of dynamic O₂ evolution and performance of cyclic electron flow around photosystem I (CEF-PSI) in long-term ground batch culture of Euglena gracilis were studied, the relationship between linear electron flow (LEF) and CEF-PSI was revealed, the function of CEF-PSI was investigated. Excellent consistency in O₂ evolution pattern was observed in cultures grown in both closed and open containers, O₂ evolution was strictly suppressed in phase 1, but the rate of it increased significantly in phase 2. CEF-PSI was proposed to be active during the whole course of cultivation, even in the declining phase 3, it still operated at the extent of 47–55%. It is suggested that the relationship between LEF and CEF-PSI is not only competition but also reciprocity. CEF-PSI was proposed to contribute to the considerable growth in phase 1; it was also suggested to play an important protective role against photosystem II (PSII) photoinhibition at the greatly enhanced level (approximately 80–95%) on the 2nd day. Our results in this research suggest that E. gracilis had very particular photosynthetic characteristics, the strict O₂ evolution suppression in the initial culture phase might be a special light acclimation behavior, and CEF-PSI could be an important mechanism involved in this kind of adaptation to the changeable light environment.     

基于循环应变特征的疲劳-蠕变寿命预测方法

为研究非对称加载下疲劳-蠕变交互作用对粉末高温合金涡轮盘寿命的影响,开展了550 ℃时不同应力水平及保载时间下FGH96粉末高温合金的低周疲劳-蠕变试验,得到了材料的循环应变响应及疲劳-蠕变寿命随保载时间的变化规律。在此基础上,结合材料的循环软化特征,以循环应变范围作为损伤控制参量,将其与保载时间和动态循环次数相关联,提出了一种基于循环应变特征的疲劳-蠕变寿命预测方法。该模型综合考虑了载荷历程和保载时间对材料疲劳-蠕变损伤的影响,能够实现不同应力水平、不同保载时间下FGH96粉末高温合金疲劳-蠕变寿命预测以及消耗寿命的动态跟踪。通过与工程上常用的几种模型进行对比,发现新模型具有较高的预测精度,且预测结果分散性较小,寿命预测结果基本位于±2.5倍寿命分散带之内,预测标准差小于0.4。     

线搜索增强的率相关晶体塑性本构积分算法及数值实现

建立在晶体微观变形机制上的晶体塑性本构理论提供了研究细观尺度上晶体材料力学行为的理论与方法.在率相关晶体塑性本构积分方法中,Newton-Raphson(N-R)迭代方法往往是迭代求解剪切应变增量的核心算法.为了提高采用N-R迭代算法的晶体塑性本构积分方法的效率,在理论上采用线搜索方法对N-R迭代方法的迭代步长进行再规...