Flow control of double bypass variable cycle engine in modal transition

To study the change mechanism and the control of the variable cycle engine in the process of modal transition, a variable cycle engine model based on component level characteristics is established. The two-dimensional CFD technology is used to simulate the influence of mode selection valve rotation on the engine flow field, which improves the accuracy of the model. Furthermore, the constant flow control plan is proposed in the modal transition process to reduce the engine installed drag. The con...     

航空发动机全生命周期碳排放计量方法研究

航空是碳排放八大重点行业之一,航空产业的碳排放主要受航空发动机碳排放的影响,因此亟需开展航空发动机碳排放计量方法研究。以生命周期评价作为航空发动机碳足迹的量化方法,将航空发动机全生命周期碳排放分为燃料周期碳排放与材料周期碳排放,并分别进行统计;将航空发动机系统边界进行划分,提出各个阶段应进行的数据收集,并对数据做出要求,得到一套相对完整的航空发动机碳排放计量方法。本文得到的方法可以从生命周期的角度全面评估航空发动机碳排放,可为航空发动机全生命周期碳排放计量提供指引,从燃料角度与材料角度为减排提供理论基础。     

关于飞船的动态稳定问题

本文研究了以平衡攻角为中心作俯仰振荡的飞船,其动态稳定形态随来流马赫数Ｍ∞Ｒ ＹＯ ＷＸ 。     

Thoughts and Research on Technical Economic Design of the Equipment

装备在研制阶段的设计方案决策和研制工作,决定了其全寿命周期费用的 90%,在装备研制阶段开展目标价格管理和技术经济性设计是提高装备经济可承受性的关键。但目前装备技术经济性设计仍存在认知不够、建设能力不足、投入不足等问题。针对上述问题进行分析,提出相应措施辅助建立装备经济性管理新模式以实现装备的经济可承受性。     

液氧煤油补燃发动机泵间管路高温富氧燃气掺混冷凝特性数值研究

针对液氧煤油补燃发动机液氧预压泵和主泵间管路富氧燃气掺混冷凝现象,建立了大过热度下富氧燃气和液氧两相流动掺混冷凝特性的全三维数值仿真方法,并以常温制冷剂R123为工质,通过气液掺混冷凝实验验证了数值仿真模型对管内两相流型和气液再液化性能的精确预测能力.仿真结果表明:弯管段气液两相在离心力作用下发生横向相对流动,强化了相...     

Trends in foF2 and the 24th solar activity cycle

The trends in foF2 are analyzed based on the data of Juliusruh and Boulder ionospheric stations. It is shown that using the traditional solar activity index F10.7 leads to an impossible trend in foF2 when the data for the 24th solar activity cycle are included into the analysis. It is assumed that the F10.7 index does not describe correctly the solar ultraviolet radiation variations in that cycle. A correction of this index using the Rz (sunspot number) and Ly (intensity of the Lyman-α line in the solar spectrum) is performed, and it is shown that in that case reasonable values of the foF2 trends are obtained.     

Effects of dry/wet ratio and pre-immersion on stress corrosion cracking of 7050-T7451 aluminum alloy under wet-dry cyclic conditions

The stress corrosion cracking (SCC) behavior and mechanism of 7050-T7451 aluminum alloy under wet-dry cyclic conditions were investigated. Slow strain rate tests (SSRTs) and electrochemical tests were used to study the effects of dry/wet ratio (DWR) and pre-immersion on SCC. Fracture and side surface characterizations were observed by scanning electron microscopy (SEM). The results demonstrate that SCC susceptibility decreases with an increase of the DWR. With an increase of the pre-immersion time, both continuous pre-immersion (CP) and wet-dry cyclic pre-immersion (WDP) samples are more sensitive to SCC, and the cracking mode in the SCC fracture region is intergranular. Furthermore, the effect of WDP on SCC is greater than that of CP when the total time immersed in solution before an SSRT is the same with each other. In fact, each single wet-dry cycle can be divided into three processes with respect to the change of solution on samples’ surface. Volatilization of water on the surface results in an increase in solute concentration, thus accelerating corrosion.     

On the occurrence and strength of multi-frequency multi-GNSS Ionospheric Scintillations in Indian sector during declining phase of solar cycle 24

This study presents unique perspectives of occurrence and strength of low latitude ionospheric scintillations on multiple signals of Global Navigation Satellite System (GNSS) and its frequency dependence using continuous observation records of 780 nights. A robust comparative analysis is performed using scintillation index, S4 and its variation during pre-midnight and post-midnight duration from a GNSS receiver located at Waltair (17.7°N, 83.3°E), India, covering period from July 2014 to August 2016. The results, generally exhibit the impact of declining phase of solar cycle 24 on occurrence and strength of scintillations, which, however, is evidently different over different frequencies transmitted from different GNSS systems. A deeper quantitative analysis uniquely reveals that apart from the solar cycle and seasonal effects, the number of visible satellites of a selected GNSS markedly affect the occurrence and also the strength. Processing scheme of adopting 6 hourly time windows of pre-midnight and post-midnight brought a novel result that the strength and occurrence of strong scintillations decrease with declining solar activity during pre-midnight hours but remarkably increase for moderate and weak scintillations during post-midnight. The physical processes that dominate the post-midnight equatorial ionosphere are invoked to explain such variations that are special during declining solar activity. Finally, inter-GNSS signal analysis in terms of the effect of strong, moderate and weak scintillations is presented with due consideration of number of satellite passes affected and frequency dependence of mean S4. The quantitative results of this study emphasize for the first time effect of low latitude scintillation on GNSS signals in Indian zone under changing background solar and seasonal conditions.     

用比值法计算材料及其机件的疲劳损伤

提出了在非对称循环加载下描述材料弹塑性材料行为的损伤演变速率方程式与各个历程与不同损伤量DCi相对应的寿命NCi估算式。其方法是采用以塑性应变幅同弹性应变幅之比值ΔEp／Δεe作为应力应变参量，以常用的材料常数作为材料参数。而且，还提出了与常用材料常数、平均应力与平均应变、加载临界历程长短有着函数关系的综合性材料常数的新概念。此外，以汽车的某一零件为例，计算了它的疲劳损伤。其计算结果与Landgraf方程式计算结果一致，且计算精度较高。这对避免过多而重复的疲劳试验，对方便工程应用，对节约人力、时间和资金有着实际意义。     

基于线性矩阵不等式的电传飞机人机闭环系统稳定域

 针对静不稳定电传飞机作动器速率限制环节引起的Ⅱ型驾驶员诱发振荡(PIO)严重威胁飞机飞行安全的问题,研究了考虑作动器速率限制因素的人机闭环系统稳定域。引入增广状态变量分离速率限制环节,建立了人机闭环系统饱和非线性模型。为得到尽可能大的人机闭环系统稳定域估计,首先将稳定域求解问题转化为凸优化问题,再通过Schur补引理将其转化为线性矩阵不等式的求解问题,最终得到了人机闭环系统椭球体稳定域估计的一般算法。时域仿真研究表明:所估计的稳定域略微保守但不冒进,静不稳定电传飞机的Ⅱ型PIO是一种发散很快的振荡而非极限环振荡,驾驶员操纵增益以及作动器速率限制值是影响稳定域的重要因素。稳定域法物理意义清晰、结果直观,可用于非线性人机闭环系统稳定性的评估。