Optimal interface surface determination for multi-axis freeform surface machining with both roughing and finishing

In the current practice of multi-axis machining of freeform surfaces, the interface surface between the roughing and finishing process is simply an offset surface of the nominal surface. While there have already been attempts at minimizing the machining time by considering the kinematic capacities of the machine tool and/or the physical constraints such as the cutting force, they all target independently at either the finishing or the roughing process alone and are based on the simple premise of an offset interface surface. Conceivably, since the total machining time should count that of both roughing and finishing process and both of them crucially depend on the interface surface, it is natural to ask if, under the same kinematic capacities and the same physical constraints, there is a nontrivial interface surface whose corresponding total machining time will be the minimum among all the possible (infinite) choices of interface surfaces, and this is the motivation behind the work of this paper. Specifically, with respect to the specific type of iso-planar milling for both roughing and finishing, we present a practical algorithm for determining such an optimal interface surface for an arbitrary freeform surface. While the algorithm is proposed for iso-planar milling, it can be easily adapted to other types of milling strategy such as contour milling. Both computer simulation and physical cutting experiments of the proposed method have convincingly demonstrated its advantages over the traditional simple offset method.     

声发射在微铣削过程中监测刀具破损的应用

应用声发射传感器对微铣削过程中的刀具状态进行监测。通过结合传声器传感器,利用小波分析,声发射传感器能更精确有效地监测刀具破损的现象。分别在几种不同的工件材料进行了声发射监测实验。通过该声发射监测刀具破损技术采集得到信号,再利用小波分析对实验数据分析。结果表明,在微铣削中利用声发射信号来监控刀具状态的可行性。     

单激励超声椭圆振动车削薄壁筒实验研究

通过对普通夹心式超声椭圆振动换能器结构的研究,设计了一种能够在单一纵向激励的情况下产生椭圆振动的换能器结构,利用有限元分析工具对换能器的结构进行分析,并且利用光纤测振仪对单一纵向激励换能器进行了测量,验证了可以通过单向激励产生椭圆振动。利用这种结构研制了一套单激励超声椭圆振动车削系统,采用PCD刀具对LY12实心件和薄壁筒工件进行了精密切削实验,实验结果表明椭圆振动切削可以大幅度降低切削力,明显改善薄壁工件的形状精度,同时工件还具有较好的表面粗糙度。     

Linear Shaped Charge Cutting Property and Charge Cutting Mechanism of Mg-Gd-Y-Zn Alloy

The linear shaped charge cutting technology is an effective technology for aircraft separation. It can separate invalid components from aircrafts timely to achieve light-weight. Magnesium alloy is the lightest metal material, and can be used to cast effective light-weight components of an aircraft construction. However, the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank. In response to the demand for the linear separation of magnesium alloys, the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test. The effects of the shaped charge line density, cutting thickness, and mechanical properties on the cutting performance of the alloy are studied. The shaped charge cutting mechanism is analyzed through the notch structure. The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse. The higher the linear density is, the stronger the ability of the linear shaped charge cutter is, and the greater the penetration depth is, which is advantageous. However, the target structure will be damaged when it is too large (e.g., 4.5 g?m-1). Within 12 mm, when the cutting thickness of the target increases, the penetration depth increases. The lower the tensile strength is, the greater the penetration depth is, and the more conducive the penetration depth to the shaped charge cutting is. When the elongation (EL) increases to 12%, the collapse of the target is incomplete and the target cannot be separated. When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa, the EL is less than 6.5%, the cutting thickness is less than 12 mm, and the linear shaped charge cutting of the magnesium alloy can be achieved stably.     

铝锂合金高速铣削表面粗糙度试验研究

在对2198铝锂合金进行高速铣削试验的基础上,研究了切削参数对表面粗糙度的影响规律,观察了其铣削表面形貌。结果表明:平直处表面粗糙度与拐角处表面粗糙度不一致是由机床主轴振动和实际进给量变化造成的;较小的每齿进给量和铣削宽度能够获得较好的表面质量;表面缺陷常发生在铣削刀痕交叉处。     

A novel method for solving shortest tool length based on compressing 3D check surfaces relative to tool postures

Solving the shortest tool length quickly under a known tool trajectory in multi-axis machining of complex channel parts is an urgent problem in industrial production. To solve this problem, a novel and efficient method is proposed which is featured by extracting only a few necessary curves from the check surface instead of sampling the entire surface. By rotating and compressing the 3D check surface relative to all tool postures, the boundaries of the area occupied by the 2D compressed surfaces are the essential elements for determining the shortest tool length. A tracking-based numerical algorithm is introduced to efficiently solve the silhouette curves which are formed in compressing. To define the multi-taper shaped tool holding system (THS) which is commonly used in production, a characterization model for THS profile is established. A model for solving the shortest tool length is finally constructed based on the critical interference relationship between the THS profile and all compressed boundary curves. For acceleration, the boundary splines are segmented according to their knot vectors. Then a new concept called the axis-aligned tool length box (AATB) is introduced, which can provide a conservative range of tool length for a spline segment. By scanning the AATBs of all spline segments, the very few effective spline segments that may ultimately determine the shortest tool length are filtered out. This acceleration method makes the solution for the shortest tool length more focused and efficient. The results of experimental examples are also reported to validate the efficiency and accuracy of the proposed algorithm.     

生成矩形毛坯最优两段排样方式的递归算法

提出一种递归算法生成矩形毛坯两维两段排样方式。这种算法将板材分成两段,同一段中所有条带的长度和方向都相同,二段的条带方向相互平行或垂直,不同尺寸的毛坯可以在一根条带中出现。通过递归在段上生成最优条带布局,隐式地讨论所有长度的段,确定所有两段组合的价值,选择价值最大的一个组合作为最优解。计算结果表明,该算法在计算时间和材料利用率两方面都有效。最后,一个实际问题的解表明:使用该算法,材料利用率较高。     

构建实例库的参数模型及其应用

通过分析系统模型和IDEFO模型,提出了实例参数模型,即将切削系统的各组成参量分成4类:非控制参量,过程参量,控制参量和输出参量并以此提出了实例库的构建过程.最后根据提出的参数模型,建立了高速切削数据库系统.     

调整参数误差对齿面接触质量的影响

从齿面接触分析(Toothcontactanalysis,TCA)内含的啮合信息分析机床调整参数误差对齿面接触质量的影响,研究机床调整参数误差与螺旋锥齿轮齿面接触分析之间的关联规律.以SGM(螺旋锥齿轮,大轮展成法,小轮变性法加工)调整卡加工的弧齿锥齿轮副为研究对象,分析得到各个调整参数误差引起的齿面接触质量的变化规律.在此基础上,确定对齿面接触质量有较大影响的机床调整参数.      

校准实验室通用软件开发平台设计技术

从无线电计量测试工作特点出发 ,在深入研究、分析各无线电参数计量测试业务工作普遍规律的基础上 ,全面阐述运用专业化的软件设计技术 ,开发校准实验室通用软件开发平台工具软件的过程。该软件能够最大限度地提高校准实验室检定测试软件的开发效率及开发质量 。