太阳电池阵列模拟器计量测试方法研究

对太阳电池阵列模拟器(SAS)的设计原理和技术要求进行了分析,并根据分析结果对太阳电池阵列模拟器计量测试方法进行了研究。     

多孔介质隔热材料中的辐射热传递分析

新型的多孔材料以其重量轻、强度高备受航天工程设计人员的亲睐,尤其是作为隔热材料使用,可以说是航天工程热防护系统的热门材料.多孔介质在辐射热传递方面具有吸收发射和散射的功能,这些功能在其接受外来热流的作用下,于内部达到热能量平衡,求解这一平衡方程就可以求出辐射热流在材料中的分布.由于求解这一方程的困难,许多学者对材料特性...     

连续推力机动轨道优化设计的贝塞尔曲线法

提出一种基于贝塞尔曲线的平面机动轨道设计方法。该方法将贝塞尔曲线方程与轨道形状方程相结合，利用得到的复合函数作为轨道方程来对机动轨道进行数学描述；通过约束条件获得可行的机动轨道族，由控制点设计给出具体的优化变量，将累积速度增量作为优化指标函数；并利用优化算法完成参数优化，从而得到最优机动轨道。最后针对设计的机动轨道推力峰值较大的问题，进一步提出了分段贝塞尔曲线法，在降低推力峰值的同时，可进一步降低燃料消耗，并在平面机动转移轨道设计的基础上，通过梯度下降对自由控制点进行修正，解决了考虑时间约束的平面轨道交会问题。     

A strategic “viewfinder” for SETI research

One of the most important reasons why unsuccessful results have been obtained so far by the SETI Project is due to the fact that no sure targets to aim at have been available up-to the present state of research. All-sky surveys, even if very accurate and complete, might result to be time-consuming. SETI needs at least one effective “viewfinder” in order that a true targeted research is carried out with a possible success. The best foundation to get this can be identified with the search for the evidence of extraterrestrial astro-engineering activity in form of the Dyson spheres predicted by theory. The existence of such stellar objects can be ascertained by finding the evidence of two main signatures in stars of solar spectral type: infrared excess and anomalous light curves due to transiting artificial objects. These are probably the most powerful viewfinders in order to allow SETI techniques for intelligent signal search to be aimed at more appropriate targets. This paper is not intended to be a research paper but rather a review paper whose goal is not to present calculations and/or operational research but rather to be a research proposal for a more focused research in SETI just using Dyson Spheres as crucial markers.     

基于Kriging模型插值的孔位修正策略

飞机装配时的孔位精度直接影响其最终装配质量，而待制孔零件易发生变形和整体偏移，因此一般通过基准孔信息对待制孔位进行补偿。提出一种基于Kriging插值的孔位修正方法，通过基准孔建立孔位理论坐标与实际偏差值的Kriging模型，进而预测待制孔的孔位偏差，并给出每个位置的预测标准误差，以指导基准孔的增添和布置。最后通过有限元和数值实验分别验证了零件在极限变形和整体平移旋转情况下该方法的有效性，实现了孔位估计误差小于0.3 mm。     

舰载机增升装置对薄翼型升力系数的影响研究

描述了增升装置在提高舰载机薄翼型升力系数方面的作用,观察到大偏角前缘襟翼小迎角时对翼型升力曲线的影响,并通过与试验现象对比,初步探讨了非线性作用形成的可能机理。利用数值模拟方法,通过有限元计算软件对相同流场中多种增升装置的升力系数进行了模拟与比较,从而达到合理设计舰载战机翼型的目的。CFD计算结果表明,所设计的二维多段翼型有良好的气动特性,升力系数得到提高,具有较好的增升效果。     

关于多项式系数二阶线性微分方程的可积性问题

主要探讨了实域上当ｇ（ｘ），ｈ（ｘ）是多基式，二阶变系数线性微分方程ｙ″＋ｇ（ｘ）ｙ‘＋ｈ（ｘ）ｙ＝０的可积性问题，沿袭了文」１「中算子矩阵理论的思想，得到了该方程要积的充分必要条件，且给出可积时的通解公式，并举例指出了文中「５，６」中收集的许多可积的二阶线性微分方程，其中相应的多项式系数的部分均是本文的特例。     

水系统装置扬程的计算及泵的选型分析

为了提高水系统中水泵的实际运行效率和扬程利用率,降低发动机试验成本,减少能量浪费,以某型发动机台架试验水系统为研究对象,综合考虑了装置静扬程、管路的各种局部损失和沿程损失开展装置扬程的计算。同时根据水系统所需的装置扬程、流量及其变化规律,从泵的参数及其特性曲线入手,进行泵的选型分析,确定合适的泵的类型、台数及连接方式。通过水系统装置扬程的计算和泵的选型分析,结合泵带来的能效利用、工程投入和运行费用等因素,可在满足发动机试验需要的同时实现经济利益最大化,为今后类似水系统工程的设计提供借鉴和指导。     

用任意拉格朗日--欧拉方法求解流体力学方程组

从积分形式的二维Lagrange流体力学方程组出发，用有限体积格式进行计算，针对不规则的四边形网格，在用次级网格的方法确定网眼内物理量的梯度的基础上，提出一种体积加权的方法来构造网眼内的线性插值多项式。将新网格进行了细划，先确定新网格小网眼中心点的密度，将小网眼的质量直接计算出来，再计算新网格的质量，然后确定相应的密度，从而实现高精度重映。最后用ALE方法进行数值模拟，得到了预期的效果。     

Assessment study of ionosphere correction model using single- and multi-shell algorithms approach over sub-Saharan African region

It is a known fact that ionosphere is the largest and the least predictable among the sources of error limiting the reliability and accuracy of Global Navigation Satellite Systems (GNSS) and its regional augmentation systems like Satellite Based Augmentation System (SBAS) in a safety-of-life application. The situation becomes worse in the Equatorial Ionization Anomaly (EIA) region, where the daytime ionization distribution is modified by the fountain effect that develops a crest of electron density at around ±15° to ±20° of the magnetic equator and a trough at the magnetic equator during the local noon hours. Related to this phenomenon is the appearance of ionosphere irregularities and plasma bubbles after local sunset. These may degrade further the quality of service obtained from the GNSS/SBAS system of the said periods. Considering the present operational augmentation systems, the accuracy and integrity of the ionosphere corrections estimate decreases as the level of disturbances increases. In order to provide a correct ionosphere correction to the user of GNSS operating in African EIA region and meet the integrity requirements, a certified ionosphere correction model that accurately characterizes EIA gradient with the full capacity to over-bound the residual error will be needed. An irregularities detector and a decorrelation adaptor are essential in an algorithm usable for African sub-Saharan SBAS operation. The algorithm should be able to cater to the equatorial plasma vertical drifts, diurnal and seasonal variability of the ionosphere electron density and also should take into account the large spatial and temporal gradients in the region. This study presents the assessment of the ionosphere threat model with single and multi-layer algorithm, using modified planar fit and Kriging approaches.