一般层合板矩形单元的几何刚度矩阵

本文简述了求解结构稳定性问题的有限元理论基础。用张量的形式指导了一般层合板矩形单元的节点力和节点位移关系方程，详细推导了一般层合板四节点矩形单元的几何刚度矩阵的公式及其显式。     

Ionospheric TEC disturbances over China during the strong geomagnetic storm in September 2017

From September 7 to 8, 2017, a G4-level strong geomagnetic storm occurred, which seriously impacted on the Earth’s ionosphere. In this work, the global ionospheric maps released by Chinese Academy of Sciences are used to investigate the ionospheric responses over China and its adjacent regions during the strong storm. The prominent TEC enhancements, which mainly associated with the neutral wind and eastward prompt penetration electric field, are observed at equatorial ionization anomaly crests during the main phase of the storm on 8 September 2017. Compared with those on 8 September, the TEC enhancements move to lower-latitude regions during the recovery phase on 9 September. A moderate storm occurred well before the start of the strong storm causes similar middle-latitude TEC enhancements on 7 September. However, the weak TEC depletion is observed at middle and low latitude on 9–10 September, which could be associated with the prevailing westward disturbance electric field or storm-time neural composition changes. In addition, the storm-time RMS and STD values of the ionospheric TEC grids over China increase significantly due to the major geomagnetic storm. The maximum of the RMS reaches 12.0 TECU, while the maximum of the STD reaches 8.3 TECU at ~04UT on 8 September.     

Neural adaptive control for a ground experiment of the space proximity operation in a six-degree-of-freedom micro-gravity simulation system

In this study, a neural adaptive controller is developed for a ground experiment with a spacecraft proximity operation. As the water resistance in the experiment is highly nonlinear and can significantly affect the fidelity of the ground experiment, the water resistance must be estimated accurately and compensated using an active force online. For this problem, a novel control algorithm combined with Chebyshev Neural Networks (CNN) and an Active Disturbance Rejection Control (ADRC) is proposed. Specifically, the CNN algorithm is used to estimate the water resistance. The advantage of the CNN estimation is that the coefficients of the approximation can be adaptively changed to minimize the estimation error. Combined with the ADRC algorithm, the total disturbance is compensated in the experiment to improve the fidelity. The dynamic model of the spacecraft proximity maneuver in the experiment is established. The ground experiment of the proximity maneuver that considers an obstacle is provided to verify the efficiency of the proposed controller. The results demonstrate that the proposed method outperforms the pure ADRC method and can achieve close-to-real-time performance for the spacecraft proximity maneuver.     

Identification of seismic activity sources on the subsatellite track by ionospheric plasma disturbances detected with the Sich-2 onboard probes

Using a cylindrical Langmuir probe and the authors’ proprietary two-channel pressure transducer, ionospheric plasma parameter distributions along the orbit of the Sich-2 satellite (Ukraine, 2011–2012) were measured. This paper is concerned with identifying the space–time location of ionospheric plasma disturbance sources, including the epicenters of actual earthquakes (before or during the satellite flyover) and incipient earthquakes on the subsatellite track, from the measured distributions of the electron density and temperature and the neutral particle temperature along the satellite orbit. To do this, the measured ionospheric plasma parameter distributions are connected to the coordinates on the subsatellite track.It is shown that local disturbances in the electron density and temperature and neutral particle temperature distributions in the satellite orbit in the ionosphere may serve as indicators of seismic activity on the subsatellite track. The epicenters of incipient earthquakes may be set off from other plasma parameter disturbance sources associated with seismic activity using information provided by special monitoring and survey centers that monitor the current seismic situation.     

Backstepping sliding-mode control of stratospheric airships using disturbance-observer

In the presence of unknown disturbances and model parameter uncertainties, this paper develop a nonlinear backstepping sliding-mode controller (BSMC) for trajectory tracking control of a stratospheric airship using a disturbance-observer (DO). Compared with the conventional sliding mode surface (SMS) constructed by a linear combination of the errors, the new SMS manifold is selected as the last back-step error to improve independence of the adjustment of the controller gains. Furthermore, a nonlinear disturbance-observer is designed to process unknown disturbance inputs and improve the BSMC performances. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and SMC design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission, even in the presence of unknown disturbances, and aerodynamic coefficient uncertainties.     

商务英语模糊语语境顺应性研究

商务英语是国际商务活动的重要语言载体。模糊语在商务英语中有着不可替代的语用功能。以商务活动中的内部沟通语境和对外沟通语境为视角,对在这两种语境下商务英语模糊语的应用规律进行分析研究,应用顺应性理论对其进行解释,阐明在实际应用中应遵循这些规律,做到＂内外有别＂。对准确使用商务英语,提高商务沟通效率以及促进商务英语的教学等方面都有重要的意义。     

直升机旋翼载荷中的非线性强迫振动方程迭代算法

介绍用迭代方法求解直升机桨叶气动载荷中的非线性强迫振动方程。计算时,先假定诱导下洗已确定,求出桨叶的初始载荷;再通过非线性强迫振动方程求出弯－弯－扭弹性变形。以某一直升机为例,求出了桨叶的各阶谐波载荷和弹性变形。计算结果与实验数据吻合。     

GC－4高强度钢化学短裂纹特性研究

采用恒ΔＫ法对ＧＣ－４钢在３．５％ＮａＣｌ溶液中化学短裂纹特性进行了试验研究。结果表明：恒ΔＫ时裂纹扩展的ｄａ／ｄＮ－ａ曲线存在临界裂纹尺寸ａ。当ａ＜ａ时,显示化学短裂纹效应。ａ值几乎不受加载频率、应力比和ΔＫ水平的影响;化学短裂纹特征扩展速率与长裂纹扩展速率之比是各种力学参量的弱函数。依据分析给出化学短裂纹扩展速率与裂纹尺寸之间的关系。     

强磁场扰动对宇宙线调制的统计研究

对1978─1982太阳活动高年时发生的激波、强磁场扰动及激波与强磁场扰动共存这三类事件引起的宇宙线变化进行了统计研究,得到如下结果:(1)激波与强磁场扰动共存时引起的宇宙线强度下降最为显着;只有激波或强磁场扰动时,宇宙线的强度变化相对较小;(2)标志速度间断的激波是产生宇宙线Forbush下降的重要因素;(3)速度间断在强磁场扰动对宇宙线的调制中可能起一个触发的作用。      

机身大迎角气动力的控制实验

本文研究了圆锥机身模型在迎角０°～９０°范围内的气动力特性。采用边条控制技术,可获得所需要的控制力与控制力矩。通过边条的对称或单侧布局和匹配边条不同的大小与安装位置,可以找到非对称力的最优控制方案。对对称布局,可以使对称现象得到控制,虽然侧力还微小产生,但侧力起始迎角却明显增大,且变化峰值可降低到原来的２５％;对单边条控制,可以获得理想平稳的控制力与控制力矩。