A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

波音737—200／300／500飞机尾部结构疲劳裂纹的探伤检查

波音系列飞机一定时间后，飞机尾部结构出现疲劳裂纹，需用涡轮检测法进行损伤检查。     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

表面裂纹理论的回顾与评述(下)

本文简要地介绍了近几十年国内外表面断裂力学理论的发展状况及所取得的一些成果，重点介绍了应力强度因子求法和裂纹扩展速率的描述。同时对应用于圆柱体上的表面裂纹应力强度因子求法及裂纹扩展速率的描述等方面成果进行了评述。     

航天电子产品金属晶须形成机理、危害及抑制措施分析

金属晶须自发生长是材料科学中长期受到关注的科学现象.随着航天电子产品集成度的提高,由金属晶须自发生长引起的短路和电子故障问题对航天电子产品的可靠性构成了潜在的威胁.因此,研究金属晶须的生长规律,分析金属晶须的生长机理,探寻抑制金属晶须生长的技术手段成为当前研究的热点.针对近年来国内外对金属晶须生长现象的一些相关研究进行了分析,主要包括金属晶须的生长行为、各种影响金属晶须生长的因素、解释锡晶须生长机理的理论等.结合航天型号金属晶须生长导致的故障,对晶须危害进行了分析,并提出了金属晶须抑制的常用措施.     

航天器AIT中心空气霉菌特性研究

通过对中国3个地区的航天器AIT厂房内空气中霉菌进行采集,利用培养法得到纯化菌株53株,通过ITS测序鉴定分属8个属,进一步对这些霉菌的特性进行研究,发现青霉属和曲霉属内不同菌株间的菌落径向生长速率差异较大,研究同时显示不同种属霉菌对消毒剂PHMB的敏感性差异非常大,这些差异将加剧微生物防护与控制的难度。     

三维光弹性测定应力强度因子K_Ⅰ的综合法

对利用三维光弹性试验数据计算应力强度因子K_I,提出一种新的算法--综合法。此法既解决了所需测量区域内条纹信息少的弱点,又克服了因裂纹尖端“钝化”而无法测到裂尖精确条纹值的困难。试验与计算结果表明此法误差小、精度最高。可应用测定受复杂载荷并具有复杂边界条件结构的应力强度因子。     

枝晶生长中的对流效应与形态选择——地基实验研究

通过在生长界面前区域创生液相流动,研究了在稀薄合金中对流对强制性枝晶生长的作用。本文首次报告了对流对强制性枝晶生长的影响。SCN—Acc.模型合金中的定量实验表明,枝晶生长的动力学和形态是温度梯度、生长速度和枝晶端前沿液体流动速度的函数。作为以地面为基础的实验研究,将有助于理解太空凝固试验的结果。     

利用疲劳裂纹扩展速率估算断裂韧性

提出了一种利用疲劳裂纹扩展速率来估算断裂韧性的方法,并利用2种材料12组试验数据对该法产生的误差及其控制方法进行了分析研究,结果表明,其误差可以控制在试验分散带内。     

某型飞机断裂谱的低载截除

研究了截除低载对全机结构各部位裂纹扩展寿命的影响,导出寿命误差与裂纹扩展比的关系,并指出寿命误差主要取决于开裂结构的材料参数,而开裂部位的影响则可忽略不计。